Sharp DX-B350P / DX-B450P / DX-CSX1 / DX-CSX2 / TEX1 / DX-UX1 / DX-UX4 User Manual / Operation Manual ▷ View online
User’s Guide
3-11
Operator Panel Menus
Operator Panel
Network Address
<hex display
of MAC
address>
of MAC
address>
NA
Displays MAC address of network interface.
IP Address
data entry
000.000.000.000
IP Address. If DHCP is enabled, this is
read-only. Otherwise, this can be changed by
the address can be set manually here
read-only. Otherwise, this can be changed by
the address can be set manually here
Subnet Mask
data entry
000.000.000.000
Default Gateway
data entry
000.000.000.000
LPD Banner
On/Off
Off
If ON, prints a special “banner page” before
each LPR print job.
each LPR print job.
DHCP
On/Off
On
IPv6
On/Off
Off
Delay Out Close
On/Off
Off
When ON, the printer will wait until the job
is completely printed and delivered to the
output tray before terminating the
connection, allowing all reverse-channel
data to be sent back to the host. This will
cause a reduction in printer throughput.
When OFF, reverse-channel data generated
after the job interpretation is discarded. No
reduction in printer throughput occurs.
is completely printed and delivered to the
output tray before terminating the
connection, allowing all reverse-channel
data to be sent back to the host. This will
cause a reduction in printer throughput.
When OFF, reverse-channel data generated
after the job interpretation is discarded. No
reduction in printer throughput occurs.
mDNS
On/Off
On
Enabled multicast-DNS protocol. mDNS is
the underlying protocol for “Bonjour”.
the underlying protocol for “Bonjour”.
Local Link
read-only
000.000.000.000
Auto-negotiated “local link” internet address
(used primarily by Bonjour protocol)
(used primarily by Bonjour protocol)
Multi-Session
On/Off
Off
When On, allows the printer to have
multiple network print sessions open at a
time. When Off, only 1 session can be
opened at a time. Some server environments
may benefit from a setting of Off.
multiple network print sessions open at a
time. When Off, only 1 session can be
opened at a time. Some server environments
may benefit from a setting of Off.
EtherTalk
On/Off
On
Netware Setup
This submenu allows you to set up the
Netware interface.
Netware interface.
Netware
On/Off
Off
Netware Frame
Auto-Sense,
802.3,
Ethernet II,
802.2 SNAP,
802.2
802.3,
Ethernet II,
802.2 SNAP,
802.2
Auto-Sense
Netware Mode
NPRINTER
PSERVER
PSERVER
PSERVER
Menu Item
Value
Default
Description
3-12
User’s Guide
Operator Panel Menus
Operator Panel
Binary PS
On/Off
On
When On, the feature allows all binary codes
to be processed by the PostScript interpreter.
When Off, special binary control codes may
be intercepted per the Format item setting.
to be processed by the PostScript interpreter.
When Off, special binary control codes may
be intercepted per the Format item setting.
Factory Defaults
Yes
No
No
No
Resets the menu to factory network defaults.
Connection Speed
Auto-Sense
100Mbit Half
100Mbit Full
10Mbit Half
10Mbit Full
100Mbit Half
100Mbit Full
10Mbit Half
10Mbit Full
Auto-Sense
Configures the Ethernet connection speed
(10 or 100 Mbits/second) and
communication mode (full or half duplex).
The “Auto Sense” setting attempts to
auto-negotiate this connection with the
networking hardware, usually a switch.
When a setting other than “Auto Sense”
must be used, the following should be
considered: If connected to network switch,
the “100Mbit/Full” setting can be used. If
connected to a hub, use the “100Mbit/Half”
setting.
(10 or 100 Mbits/second) and
communication mode (full or half duplex).
The “Auto Sense” setting attempts to
auto-negotiate this connection with the
networking hardware, usually a switch.
When a setting other than “Auto Sense”
must be used, the following should be
considered: If connected to network switch,
the “100Mbit/Full” setting can be used. If
connected to a hub, use the “100Mbit/Half”
setting.
Bidirectional
On/Off
On
When this setting is “on”, the printer may
receive and send information over the
network interface. When this setting is “off”,
the printer will only receive information
over the network interface. This applies
primarily when using printing over a “Port
9100” connection. This setting normally
should be left at its default setting, should
only be turned “off” under special
circumstances
receive and send information over the
network interface. When this setting is “off”,
the printer will only receive information
over the network interface. This applies
primarily when using printing over a “Port
9100” connection. This setting normally
should be left at its default setting, should
only be turned “off” under special
circumstances
.
Wait timeout
0000-9999
0270
(In Seconds): Specifies the amount of time
the printer will allow a network connection
to remain open without transferring data
before the printer terminates the connection.
the printer will allow a network connection
to remain open without transferring data
before the printer terminates the connection.
SNMP On/Off
On/Off
On
HTTP Port
00000-99999
00080
Specifies the TCP port number to use for
HTTP connection to the printers embedded
web server.
HTTP connection to the printers embedded
web server.
IP Filtering
Disabled
Enabled
Enabled
Disabled
(available via web server only): Allows an
administrator to control access to printing
and access to the embedded web server on
the basis of IP addresses. This is a security
feature.
administrator to control access to printing
and access to the embedded web server on
the basis of IP addresses. This is a security
feature.
USB Setup
This item allows you to set up the USB
interface.
interface.
Interpreter
Auto Switch
PCL
PostScript 3
PCL
PostScript 3
Auto Switch
Menu Item
Value
Default
Description
User’s Guide
3-13
Operator Panel Menus
Operator Panel
PS Menu
The PS menu allows you to Print PS Errors. Items available in this menu are described below
PCL Menu
The PCL menu allows to set a variety of PCL settings. Items available in this menu are
described below
described below
Format
Raw
Normal
Binary
Normal
Binary
Raw
Configures how incoming print jobs are
scanned for special binary control codes.
RAW=no processing
Normal = “Adobe Standard Protocol” (ASP)
Binary = “Binary Control Protocol” (BCP)
When Interpreter setting is Auto Switch and
this setting is Raw, the printer will
automatically determine the control code
method, defaulting to Normal if no codes are
found.
scanned for special binary control codes.
RAW=no processing
Normal = “Adobe Standard Protocol” (ASP)
Binary = “Binary Control Protocol” (BCP)
When Interpreter setting is Auto Switch and
this setting is Raw, the printer will
automatically determine the control code
method, defaulting to Normal if no codes are
found.
Delay Out Close
On/Off
Off
When ON, the printer will wait until the job
is completely printed and delivered to the
output tray before terminating the
connection, allowing all reverse-channel
data to be sent back to the host. This will
cause a reduction in printer throughput.
When OFF, reverse-channel data generated
after the job interpretation is discarded. No
reduction in printer throughput occurs.
is completely printed and delivered to the
output tray before terminating the
connection, allowing all reverse-channel
data to be sent back to the host. This will
cause a reduction in printer throughput.
When OFF, reverse-channel data generated
after the job interpretation is discarded. No
reduction in printer throughput occurs.
Binary PS
On/Off
On
When On, the feature allows all binary codes
to be processed by the PostScript interpreter.
When Off, special binary control codes may
be intercepted per the Format item setting.
to be processed by the PostScript interpreter.
When Off, special binary control codes may
be intercepted per the Format item setting.
Parameter
Value
Default
Description
Print PS Errors
On/Off
Off
Choose to either print or not print PS errors.
Parameter
Value
Default
Description
Orientation
Portrait
Landscape
Landscape
Portrait
Choose the orientation of the page.
Font Source
Internal
User FLASH
Hard Disk
Compact Flash
User FLASH
Hard Disk
Compact Flash
Internal
Choose the source of the default font.
Font Number
0-158
50
Set the default font number.
Menu Item
Value
Default
Description
3-14
User’s Guide
Operator Panel Menus
Operator Panel
Pitch
0.08 - 100.00
10.00
Change the default pitch of text.
Symbol Set
All available
symbol sets
symbol sets
10U:PC-8 CP437
Choose a default symbol set.
Lines Per Page
5-128
60/Letter
64/A4
64/A4
Change the default number of lines per page.
Default value varies by paper size selected.
Default value varies by paper size selected.
CR Mode
CR=CR
CR=CR/LF
CR=CR/LF
CR = CR
Define the default action prompted by a
carriage return—a carriage return equals
either a carriage return alone, or a carriage
return and a line feed together.
carriage return—a carriage return equals
either a carriage return alone, or a carriage
return and a line feed together.
LF Mode
LF=LF
LF=CR/LF
LF=CR/LF
LF = LF
Define the default action prompted by a line
feed—a line feed equals either a line feed
alone or a carriage return and a line feed
together.
feed—a line feed equals either a line feed
alone or a carriage return and a line feed
together.
FF Mode
FF=FF
FF=CR/FF
FF=CR/FF
FF = FF
Define the default action prompted by a
form feed—a form feed equals either a form
feed alone or a carriage return and a form
feed together.
form feed—a form feed equals either a form
feed alone or a carriage return and a form
feed together.
Print Area
Normal
Expanded
Expanded
Normal
Set the print area.
Parameter Values
submenu
Paper Source
Tray 1
Tray 2
Tray 3
Tray 4
Auto-Select
Tray 2
Tray 3
Tray 4
Auto-Select
Varies per tray
Set the escape sequence for paper source.
Paper Size
Executive
Letter
Legal
Invoice
Legal13
A6
A5
A4
B5
Monarch
Com10
DL
C5
Com9
Letter
Legal
Invoice
Legal13
A6
A5
A4
B5
Monarch
Com10
DL
C5
Com9
Varies per size
Set the escape sequence for paper size.
Parameter
Value
Default
Description
Click on the first or last page to see other DX-B350P / DX-B450P / DX-CSX1 / DX-CSX2 / TEX1 / DX-UX1 / DX-UX4 service manuals if exist.