Sharp AR-PN1 Service Manual ▷ View online
2-14
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
CHAPTER 2 OUTLINE OF OPERATION
d. Saddle Delivery
The machine deposits a stack of sheets on the processing tray, staples it (middle 2-point),
and then moves it to the saddle unit. The saddle unit folds the stack in two, and delivers it to
the bind tray.
the bind tray.
F02-201-05
Chap02.p65
3/28/01, 12:07 PM
14
2-15
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
CHAPTER 2 OUTLINE OF OPERATION
2.2 Feed/Delivery
2.2.1 Outline
The machine forwards the sheets coming from its host machine to the delivery tray, pro-
cessing tray, or saddle unit according to the type of delivery used. The sheets forwarded to
the processing tray or the saddle unit are offset, stapled, or folded.
the processing tray or the saddle unit are offset, stapled, or folded.
F02-202-01 shows the motors that are associated with moving and aligning sheets. These
motors are controlled (rotated clockwise or counterclockwise) by the microprocessor (CPU)
on the finisher controller PCB.
on the finisher controller PCB.
The paper path is equipped with the sensors shown in T02-202-02 used to monitor the ar-
rival or passage of sheets.
If a sheet fails to arrive at or move past a specific sensor within a specific period of time,
the finisher controller will assume a jam, and stops the ongoing operation and, at the same
time, communicates the presence of a jam to the host machine.
time, communicates the presence of a jam to the host machine.
Notation
M1
M2
M3
M4
M5
M7
Name
Feed motor
Paddle motor
Delivery motor
Alignment plate motor
(front)
Alignment plate motor
(rear)
Staple/fold motor
Description
Stepping motor
Stepping motor
Stepping motor
Stepping motor
Stepping motor
Brush DC motor
Connector on finisher
controller PCB
controller PCB
CN10
CN10
CN13
CN3
CN3
CN6
T02-202-01
Chap02.p65
3/28/01, 12:07 PM
15
2-16
COPYRIGHT
©
2001 CANON INC
2001 CANON INC
.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV
.0 MAR.
2001
CHAPTER 2 OUTLINE OF OPERA
TION
F02-202-01
M6
M7
M3
M4
M5
M2
PI14
CL
M8
M1
Finisher controller PCB (1/2)
Feed motor
drive signal FEEDMTR
drive signal FEEDMTR
Paddle motor
drive signal PDLMTR
drive signal PDLMTR
Alignment plate motor
(rear) drive signal RJOGMTR
(rear) drive signal RJOGMTR
Bind clutch drive signal B_CLU
Alignment plate motor
(front) drive signal FJOGMTR
(front) drive signal FJOGMTR
Finisher controller PCB (2/2)
Staple/fold motor drive signal BINDMTR
Staple/fold motor clock detect signal
BIND_CLK
BIND_CLK
Shift motor drive signal SIFTMTR
Delivery motor drive signal EJCTMTR
Slide motor drive signal SLIDMTR
Chap02.p65
3/28/01, 12:07 PM
16
2-17
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
CHAPTER 2 OUTLINE OF OPERATION
F02-202-02
Finisher controller PCB
PI10
F
old position paper detect signal BIND_P
PI1
Inlet paper detect signal ENT_P
Notation
PI1
PI10
Name
Inlet sensor
Fold position sensor
Connector on finisher
controller PCB
controller PCB
CN16
CN16
Description
Photointerrupter
Photointerrupter
T02-202-02
Chap02.p65
3/28/01, 12:07 PM
17
Click on the first or last page to see other AR-PN1 service manuals if exist.