Sharp AR-PN1 Service Manual ▷ View online
2-10
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
CHAPTER 2 OUTLINE OF OPERATION
2 Feed/Drive System
2.1 Outline
The machine performs the following in response to the commands coming from its host
machine on the sheets arriving from the host machine for delivery: simple stacking, job off-
set, and stapling or folding (in two).
set, and stapling or folding (in two).
If a punch unit (option) is installed, the sheets are pouched and delivered to the delivery
tray.
Sheets may be delivered in either of five ways (including one for the puncher unit):
Punching
Normal
delivery
delivery
Delivery
method
method
Middle 2-point stapling
Job offset
Simple stacking
Stapling
Front 1-point stapling
Rear 1-point stapling
Middle 2-point stapling
Stitching
Saddle delivery
F02-201-01
Chap02.p65
3/28/01, 12:07 PM
10
2-11
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
CHAPTER 2 OUTLINE OF OPERATION
2.1.1 Normal Delivery
a. Simple Stacking
The machine pulls in the sheet once to the processing tray and then delivers it to the deliv-
ery tray.
Tray
Paper
F02-201-02
Chap02.p65
3/28/01, 12:07 PM
11
2-12
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
CHAPTER 2 OUTLINE OF OPERATION
b. Job Offset
The machine pulls the sheet once to the processing tray. It then moves the sheet to the
front or the rear using the aligning plate. When it has deposited a specific number of sheets,
it delivers them in the form of a aligning plane. When the number of sheets stacked on the
processing tray reaches a specified value, the sheets are delivered in a form of a stack. Even
if the specified value is not reached, stacked sheets are temporarily delivered when 10 sheets
of large-size paper (300 mm or longer) or 30 sheets of small-size paper (299 mm or shorter)
have been stacked. (5- and STMT-sizes: 10 sheets)
it delivers them in the form of a aligning plane. When the number of sheets stacked on the
processing tray reaches a specified value, the sheets are delivered in a form of a stack. Even
if the specified value is not reached, stacked sheets are temporarily delivered when 10 sheets
of large-size paper (300 mm or longer) or 30 sheets of small-size paper (299 mm or shorter)
have been stacked. (5- and STMT-sizes: 10 sheets)
4th set
(direction of delivery)
Results of offset delivery (4 jobs)
2nd set
3rd set
1st set
F02-201-03
Chap02.p65
3/28/01, 12:07 PM
12
2-13
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
CHAPTER 2 OUTLINE OF OPERATION
c. Stapling
The machine stacks sheets coming from its host machine on the processing tray. When
the number of sheets stacked on the processing tray reaches a specified value, the finisher
staples them delivers the stapled stack to the delivery tray.
staples them delivers the stapled stack to the delivery tray.
F02-201-04
Chap02.p65
3/28/01, 12:07 PM
13
Click on the first or last page to see other AR-PN1 service manuals if exist.