Sharp AR-PE2 (serv.man6) Service Manual ▷ View online
2-9
2
Screens
•
Color Charts
—Prints the color reference charts, including swatches of the RGB,
CMY, and Pantone colors available from the Fiery AR-PE2.
•
Font List
—Prints a list of all the fonts resident on the Fiery AR-PE2 hard disk
drive.
Suspend Printing
— This option interrupts the current print job so you can use the copier
to make copies. If it has not finished processing, the RIP will continue but the job will
not print. You can then select
not print. You can then select
Resume Printing
.
Resume Printing
—Resumes printing after interrupting the print job in order to make
copies.
Reboot Server
—Shuts down all printing activity properly and then restarts the
Fiery AR-PE2. Access to Fiery AR-PE2 Setup options is made available at this time. The
option Shut Down System shuts down the system properly so that you can safely power
off the copier.
option Shut Down System shuts down the system properly so that you can safely power
off the copier.
Run Setup
—Configure the Fiery AR-PE2 for specific options at startup and save the
settings on the Fiery AR-PE2. Certain options may be required in order to connect to
networked computers. See the Configuration Guide for more information.
networked computers. See the Configuration Guide for more information.
Run Diagnostics
—Select this option to access:
•
Test I/F board
—Runs diagnostics on the Fiery AR-PE2 board.
Calibration
—Select calibration options such as Remove Calibration, Print Measurement
Page, or Apply Calibration.
3
Overview
3-1
Generally, the Fiery AR-PE2 assembly does not require regular maintenance. Use the
procedures in this chapter to inspect, remove, reseat, or replace major hardware
components and also to install system software.
procedures in this chapter to inspect, remove, reseat, or replace major hardware
components and also to install system software.
Overview
This chapter includes information on the following:
• Cable connections (page 3-3)
• Fiery AR-PE2 board components
• CPU cooling unit (page 3-10)
• DIMMs (page 3-12)
• Battery (page 3-14)
• HDD [hard disk drive] (page 3-15)
• Chassis fan (page 3-18)
• System software (page 3-20)
For how to remove and replace the entire Fiery AR-PE2 assembly, see the AR-PE2
Installation Manual.
Installation Manual.
See Figure 3-1 on page 3-2 for an overview of Fiery AR-PE2 board components.
Replacement parts are available from your authorized service representative.
Replacement parts are available from your authorized service representative.
Follow standard ESD (electrostatic discharge) precautions while working on the internal
components of the copier. Before performing the procedures described in this chapter,
review “Precautions” on page x and “Tools you will need” on page xii.
components of the copier. Before performing the procedures described in this chapter,
review “Precautions” on page x and “Tools you will need” on page xii.
The Fiery AR-PE2 system software is installed on the hard disk drive at the factory. You
will need to re-install system software if you:
will need to re-install system software if you:
• Replace the HDD
• Upgrade to a more recent version of the system software
Shutting down the Fiery AR-PE2
Before you power off the copier, shut down the Fiery AR-PE2.
T
O
SHUT
DOWN
THE
F
IERY
AR-PE2
FROM
THE
OPERATION
PANEL
1.
Press the PRINT key on the copier operation panel.
2.
Press the OFFLINE button on the operation panel LCD.
Chapter 3:
Service
Procedures
Service
Procedures
3-2
3
Service Procedures
3.
Press the Fiery icon in the upper right corner of the LCD.
4.
Wait for the Info screen and press the menu button between the two arrow buttons on
the left side of the LCD to display the Functions menu.
the left side of the LCD to display the Functions menu.
5.
Press the down arrow button and press the Shut Down selection button on the right side
of the LCD.
of the LCD.
6.
Press the Shut Down System selection button from the next screen.
When a message appears in the LCD indicating it is safe to power off, turn off the copier
using the copier power switch.
using the copier power switch.
F
IGURE
3-1
Exploded view of Fiery AR-PE2 assembly
4
7
10
9
8
Key
1. Chassis
2. Chassis fan
3. Video interface connector
4. Fiery AR-PE2 board
5. DIMM socket J48
6. DIMM socket J49
7. HDD
8. Battery
9. DIMM
10. CPU cooling unit
11. Top plate
12. Cover plate
6
5
11
12
3
1
2
Click on the first or last page to see other AR-PE2 (serv.man6) service manuals if exist.