Sharp AR-PE1 (serv.man12) User Manual / Operation Manual ▷ View online
1
1-7
Quick path to installation
Windows NT 4.0 Server environment
Windows computer
Windows computer
Key to setup:
1 Windows NT 4.0 Server
page 5-9
2 Fiery X4 Setup
Chapter 3
3 Windows NT 4.0 client
page 5-11
1
3
3
TCP/IP
Another supported
protocol
protocol
LAN with
NETBEUI, etc.
NETBEUI, etc.
Printing on this network
Windows 95/98 clients can print using a
protocol available on the Windows NT 4.0
print server. Windows NT 4.0 machines
can print using TCP/IP with the lpd
protocol.
protocol available on the Windows NT 4.0
print server. Windows NT 4.0 machines
can print using TCP/IP with the lpd
protocol.
For running Fiery utilities and WebTools
A Windows NT 4.0 computer with TCP/IP
loaded
loaded
NETBEUI or other protocol available on
the clients and the server
the clients and the server
TCP/IP (lpd) for printing
TCP/IP (http) for Fiery WebTools
TCP/IP for Fiery utilities
TCP/IP (http) for Fiery WebTools
TCP/IP for Fiery utilities
1
Windows NT 4.0 computer
with TCP/IP loaded
with TCP/IP loaded
Windows NT Workstation
or Windows NT Server
acting as print server
or Windows NT Server
acting as print server
2
Fiery X4 connected to copier
1
1-8
Connecting to the Network
Windows computers using Windows printing
Windows computer
Windows computer
Key to setup:
1 Windows computer
Getting Started
2 Fiery X4 Setup
Chapter 3
TCP/IP (nbt)
For Windows printing
Windows 95/98 and NT 4.0 computers
Windows (SMB) printing enabled
1
1
1
Another supported
protocol
protocol
TCP/IP (nbt) protocol
Windows computer
2
Fiery X4 connected to copier
1
1-9
Quick path to installation
UNIX workstations and Windows NT 4.0 computers on a TCP/IP network
Key to setup:
1 UNIX server/host
page 5-14
2 Fiery X4 Setup
Chapter 3
3 UNIX workstation
page 5-14
4 TCP/IP client
Getting Started, page 5-11
5 Windows NT 4.0 client
page 5-11
TCP/IP (lpd) protocol
Another supported
protocol
protocol
TCP/IP client PC
4
Printing on this network
UNIX workstations with the TCP/IP
(lpd) protocol can print directly and
act as host for shared printing.
(lpd) protocol can print directly and
act as host for shared printing.
TCP/IP clients can print through
UNIX server or directly; requires
TCP/IP and the lpr print service
loaded.
UNIX server or directly; requires
TCP/IP and the lpr print service
loaded.
For running Fiery utilities and
WebTools
WebTools
Only a Windows 95/98, NT 4.0, or
Mac OS computer with TCP/IP loaded
can use these applications.
Mac OS computer with TCP/IP loaded
can use these applications.
1, 3
TCP/IP (lpd and http)
5
Windows NT 4.0 computer
with TCP/IP loaded
with TCP/IP loaded
UNIX server or
workstation
workstation
2
Fiery X4 connected to copier
1
1-10
Connecting to the Network
Connecting network cable to the Fiery X4
In this section, the back panel of the Fiery X4 is illustrated, followed by information
for connecting to the Ethernet board. For information about connecting to a Token
Ring network, see Appendix A, “Token Ring Network Option.”
for connecting to the Ethernet board. For information about connecting to a Token
Ring network, see Appendix A, “Token Ring Network Option.”
Shut down the Fiery X4
before attaching it to any network device. If the Fiery X4 has
just finished processing, wait 5 seconds after the system reaches the Idle state before
using the power switch to turn off the Fiery X4.
using the power switch to turn off the Fiery X4.
Back view of the Fiery X4
!
10/100BaseT Ethernet (RJ-45)
Copier interface connector
Click on the first or last page to see other AR-PE1 (serv.man12) service manuals if exist.