Sharp AR-M550 (serv.man15) Service Manual ▷ View online
AR-M550/M620 SIMULATION 8 - 89
Operation/Procedure
1) Enter the number corresponding to the output mode with 10-key.
2) Press [START] key.
The output is delivered at the send level set with the soft SW.
When the number is entered during execution, the kind of signal can
be changed.
be changed.
When [START] key is pressed, the voice message is sent. When
[CUSTOM SETTINGS] key is pressed, it is stopped.
[CUSTOM SETTINGS] key is pressed, it is stopped.
Operation/Procedure
1) Select YES/NO of image memory clear with 10-key.
2) Press [START] key.
The SRAM image data management table and image data in the Flash
ROM area and HD (except for filing images) are cleared.
ROM area and HD (except for filing images) are cleared.
The processing status of image memory clear is displayed with "+."
66-9
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the output operation of various sound
signals of FAX. (Used to check the operation of the
sound output IC.) An output is sent at the send level
set by the soft switch. (Only when FAX is installed)
signals of FAX. (Used to check the operation of the
sound output IC.) An output is sent at the send level
set by the soft switch. (Only when FAX is installed)
Section
FAX
Item
Operation
1 NONE
Mute
11 MESSAGE 9
MESSAGE 9
2 PAUSE
Pause sound 12 MESSAGE10
MESSAGE 10
3 MESSAGE1 MESSAGE 1 13 MESSAGE11
MESSAGE 11
4 MESSAGE2 MESSAGE 2 14 MESSAGE12
MESSAGE 12
5 MESSAGE3 MESSAGE 3 15 MESSAGE13
MESSAGE 13
6 MESSAGE4 MESSAGE 4 16 MESSAGE14
MESSAGE 14
7 MESSAGE5 MESSAGE 5 17 MESSAGE15
MESSAGE 15
8 MESSAGE6 MESSAGE 6 18 ALARM
Alarm
9 MESSAGE7 MESSAGE 7 19 RINGER
Call ring
10 MESSAGE8 MESSAGE 8 20 EXT.TEL.RING
ER
External TEL
ring
ring
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX) SELECT 1-20, AND PRESS
START.
1.NONE 2.PAUSE 3.MESSAGE1
4.MESSAGE2 5.MESSAGE3 6.MESSAGE4
7.MESSAGE5 8.MESSAGE6 9.MESSAGE7
10.MESSAGE8 11.MESSAGE9 12.MESSAGE10
13.MESSAGE11 14.MESSAGE12 15.MESSAGE13
16.MESSAGE14 17.MESSAGE15 18.MESSAGE13
19.RINGER 20.EXT.TEL.RINGER
2
Same
display
display
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX) SELECT 1-20, AND PRESS
START. EXECUTING···.
1.NONE 2.PAUSE 3.MESSAGE1
4.MESSAGE2 5.MESSAGE3 6.MESSAGE4
7.MESSAGE5 8.MESSAGE6 9.MESSAGE7
10.MESSAGE8 11.MESSAGE9 12.MESSAGE10
13.MESSAGE11 14.MESSAGE12 15.MESSAGE13
16.MESSAGE14 17.MESSAGE15 18.MESSAGE13
19.RINGER 20.EXT.TEL.RINGER
2
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX) SELECT 1-20, AND PRESS
START. EXECUTING···.
1.NONE 2.PAUSE 3.MESSAGE1
4.MESSAGE2 5.MESSAGE3 6.MESSAGE4
7.MESSAGE5 8.MESSAGE6 9.MESSAGE7
10.MESSAGE8 11.MESSAGE9 12.MESSAGE10
13.MESSAGE11 14.MESSAGE12 15.MESSAGE13
16.MESSAGE14 17.MESSAGE15 18.MESSAGE13
19.RINGER 20.EXT.TEL.RINGER
1
SIMULATION 66-8
MESSAGE OUTPUT CHECK.(LEVEL MAX) SELECT 1-20, AND PRESS
START.
1.NONE 2.PAUSE 3.MESSAGE1
4.MESSAGE2 5.MESSAGE3 6.MESSAGE4
7.MESSAGE5 8.MESSAGE6 9.MESSAGE7
10.MESSAGE8 11.MESSAGE9 12.MESSAGE10
13.MESSAGE11 14.MESSAGE12 15.MESSAGE13
16.MESSAGE14 17.MESSAGE15 18.MESSAGE13
19.RINGER 20.EXT.TEL.RINGER
2
Press [CUSTOM SETTINGS] key.
Press [CUSTOM SETTINGS] key.
Select 2, and press [START] key.
Select other 1, and press [START] key.
66-10
Purpose
User data output/Check (Display/Print)
Function
(Purpose)
(Purpose)
Used to clear all data of the image memory (memory
send/receive). The confidential data are also cleared at
the same time. (Only when FAX is installed)
send/receive). The confidential data are also cleared at
the same time. (Only when FAX is installed)
Section
FAX
Item
Data
1
YES
Image memory clear is executed.
2
NO
Clear is not executed.
Press [START] key to clear.
Same
display
display
SIMULATION 66-9
MESSAGE OUTPUT CHECK.(SOFT SW.) SELECT 1-20, AND PRESS
START. EXECUTING···.
1.NONE 2.PAUSE 3.MESSAGE1
4.MESSAGE2 5.MESSAGE3 6.MESSAGE4
7.MESSAGE5 8.MESSAGE6 9.MESSAGE7
10.MESSAGE8 11.MESSAGE9 12.MESSAGE10
13.MESSAGE11 14.MESSAGE12 15.MESSAGE13
16.MESSAGE14 17.MESSAGE15 18.MESSAGE13
19.RINGER 20.EXT.TEL.RINGER
2
SIMULATION 66-9
MESSAGE OUTPUT CHECK.(SOFT SW.) SELECT 1-20, AND PRESS
START. EXECUTING···.
1.NONE 2.PAUSE 3.MESSAGE1
4.MESSAGE2 5.MESSAGE3 6.MESSAGE4
7.MESSAGE5 8.MESSAGE6 9.MESSAGE7
10.MESSAGE8 11.MESSAGE9 12.MESSAGE10
13.MESSAGE11 14.MESSAGE12 15.MESSAGE13
16.MESSAGE14 17.MESSAGE15 18.MESSAGE13
19.RINGER 20.EXT.TEL.RINGER
1
SIMULATION 66-9
MESSAGE OUTPUT CHECK.(SOFT SW.) SELECT 1-20, AND PRESS
START.
1.NONE 2.PAUSE 3.MESSAGE1
4.MESSAGE2 5.MESSAGE3 6.MESSAGE4
7.MESSAGE5 8.MESSAGE6 9.MESSAGE7
10.MESSAGE8 11.MESSAGE9 12.MESSAGE10
13.MESSAGE11 14.MESSAGE12 15.MESSAGE13
16.MESSAGE14 17.MESSAGE15 18.MESSAGE13
19.RINGER 20.EXT.TEL.RINGER
2
Press [CUSTOM SETTINGS] key.
Press [CUSTOM SETTINGS] key.
Select other 1, and press [START] key.
Select 2, and press [START] key.
SIMULATION 66-10
IMAGE MEMORY CLEAR
ARE YOU SURE?
1. YES
2. NO
1
1
SIMULATION 66-10
IMAGE MEMORY CLEAR EXECUTING···.
++++++
AR-M550/M620 SIMULATION 8 - 90
Operation/Procedure
1) Select the number corresponding to the output mode with 10-key.
2) Press [START] key.
The signal is sent in the max. send level.
When the number is entered during execution, the kind of signal can
be changed.
be changed.
When [CUSTOM SETTINGS] key is pressed during execution, the
operation is stopped.
operation is stopped.
Operation/Procedure
1) Select the number corresponding to the output mode with 10-key.
2) Press [START] key.
The signal is sent in the send level set with the soft switch.
When the number is entered during execution, the kind of signal can
be changed.
be changed.
When [CUSTOM SETTINGS] key is pressed during execution, the
operation is stopped.
operation is stopped.
Operation/Procedure
1) Enter the dial number with 10-key.
Use 10-key, [*] key, and [#] key to enter the number. The upper
limit is 20 digits.
limit is 20 digits.
When [CLEAR] key is pressed, the mode returns to the initial state.
2) Press [START] key.
Operation/Procedure
1) Enter 0 with 10-key.
2) Press [START] key.
The dial signal is outputted.
(Dial pulse make time setting)
1) Enter 1 with 10-key.
2) Press [START] key.
66-11
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the output operation of FAX G3 mode
300bps. (Used to check the operation of MODEM.)
Send level: Max. (Only when FAX is installed)
300bps. (Used to check the operation of MODEM.)
Send level: Max. (Only when FAX is installed)
Section
FAX
Item
Operation
1
NO SIGNAL
No signal
4
00000
00000
2
11111
11111
5
010101
010101
3
11110
11110
6
00001
00001
Same display
Select 3 and press [START] key.
66-12
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the output operation of FAX G3 mode
300bps. (Used to check the operation of MODEM.) An
output is send at the send level set by the soft switch.
(Only when FAX is installed)
300bps. (Used to check the operation of MODEM.) An
output is send at the send level set by the soft switch.
(Only when FAX is installed)
Section
FAX
Item
Operation
1
NO SIGNAL
No signal
4
00000
00000
2
11111
11111
5
010101
010101
3
11110
11110
6
00001
00001
SIMULATION 66-11
300bps SIGNAL OUTPUT.(LEVEL MAX) SELECT 1-6, AND PRESS
START.
1. NO SIGNAL 2. 11111 3. 11110 4. 00000
5. 010101 6. 00001
SIMULATION 66-11
300bps SIGNAL OUTPUT.(LEVEL MAX) SELECT 1-6, AND PRESS
START.
EXECUTING···.
1. NO SIGNAL 2. 11111 3. 11110 4. 00000
5. 010101 6. 00001
1
1
Press [START] key.
Press [CUSTOM SETTINGS] key
SIMULATION 66-11
300bps SIGNAL OUTPUT.(LEVEL MAX) SELECT 1-6, AND PRESS
START.
EXECUTING···.
1. NO SIGNAL 2. 11111 3. 11110 4. 00000
5. 010101 6. 00001
3
Press [CUSTOM SETTINGS] key.
Same display
Select 3 and press [START] key.
66-13
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to enter (set) the number of FAX dial signal
output test. (The dial number set by this simulation is
outputted when the dial signal output test is made by
SIM 66-14 - 16. ) (Only when FAX is installed)
output test. (The dial number set by this simulation is
outputted when the dial signal output test is made by
SIM 66-14 - 16. ) (Only when FAX is installed)
Section
FAX
Item
Data
66-14
Purpose
Setting/Operation test/Check
Function
(Purpose)
(Purpose)
Used to set the make time in the FAX pulse dial mode
(10pps) and to test the dial signal output. (The dial
number signal set by SIM 66-13 is outputted.) Used to
check troubles in dialing and to check the operation.
(Only when FAX is installed)
(10pps) and to test the dial signal output. (The dial
number signal set by SIM 66-13 is outputted.) Used to
check troubles in dialing and to check the operation.
(Only when FAX is installed)
Section
FAX
Item
Operation
SIMULATION 66-12
300bps SIGNAL OUTPUT.(SOFT SW.) SELECT 1-6, AND PRESS
START.
1. NO SIGNAL 2. 11111 3. 11110 4. 00000
5. 010101 6. 00001
SIMULATION 66-12
300bps SIGNAL OUTPUT.(SOFT SW.) SELECT 1-6, AND PRESS
START.
EXECUTING···.
1. NO SIGNAL 2. 11111 3. 11110 4. 00000
5. 010101 6. 00001
1
1
Press [START] key.
Press [CUSTOM SETTING] key.
SIMULATION 66-12
300bps SIGNAL OUTPUT.(SOFT SW.) SELECT 1-6, AND PRESS
START.
EXECUTING···.
1. NO SIGNAL 2. 11111 3. 11110 4. 00000
5. 010101 6. 00001
2
Press [CUSTOM SETTINGS] key.
SIMULATION 66-13
DIAL TEST NUMBER SETTING. 0-9:[0-9], *:[*], #:[#]
INPUT NUMBER AND PRESS START.
0123456789*#01234567
AR-M550/M620 SIMULATION 8 - 91
3) Enter the set value with 10-key.
4) Press [START] key.
The dial signal is sent with the set value + 29ms.
When [CUSTOM SETTINGS] key is pressed during execution, the
operation is stopped.
operation is stopped.
Operation/Procedure
1) Enter 0 with 10-key.
2) Press [START] key.
The dial signal is outputted.
(Dial pulse make time setting)
1) Enter 1 with 10-key.
2) Press [START] key.
3) Enter the set value with 10-key.
4) Press [START] key.
The dial signal is sent with the set value + 9ms.
When [CUSTOM SETTINGS] key is pressed during execution, the
operation is stopped.
operation is stopped.
Operation/Procedure
1) Enter 0 with 10-key.
2) Press [START] key.
The dial signal is outputted.
(Dial pulse make time setting)
1) Enter 1 or 2 with 10-key.
2) Press [START] key.
3) Enter the set value with 10-key.
4) Press [START] key.
When [CUSTOM SETTINGS] key is pressed during execution, the
operation is stopped.
operation is stopped.
0
EXECUTE
Execute
1
MAKE TIME
Dial pulse make time setting (0 - 15)
66-15
Purpose
Setting/Operation test/Check
Function
(Purpose)
(Purpose)
Used to set the make time in the FAX pulse dial mode
(20pps) and to test the dial signal output. (The dial
number signal set by SIM 66-13 is outputted.) Used to
check troubles in dialing and to check the operation.
(Only when FAX is installed)
(20pps) and to test the dial signal output. (The dial
number signal set by SIM 66-13 is outputted.) Used to
check troubles in dialing and to check the operation.
(Only when FAX is installed)
Section
FAX
Item
Operation
0
EXECUTE
Execute
1
MAKE TIME
Dial pulse make time setting (0 - 15)
SIMULATION 66-14
DIAL TEST(10PPS). SELECT 0-15, AND PRESS START.
[1. MAKE TIME]
1
7
SIMULATION 66-14
DIAL TEST(10PPS). EXECUTE
1. MAKE TIME
7
; [+29 ms]
SIMULATION 66-14
DIAL TEST(10PPS). SELECT 0-1, AND PRESS START.
0. EXECUTE
1. MAKE TIME
7
; [+29 ms]
Press [CUSTOM SETTINGS] key.
Press [CUSTOM SETTINGS] key
or press [START] key.
or press [START] key.
Select 1 and
press [START] key.
press [START] key.
Select 0
and press
[START] key.
and press
[START] key.
66-16
Purpose
Setting/Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the dial signal (DTMF) output in the FAX
tone dial mode. (The dial number signal set by SIM 66-
13 is outputted.) The send level can be set to an
optional level. Used to check troubles in dialing and to
check the operation. (Only when FAX is installed)
tone dial mode. (The dial number signal set by SIM 66-
13 is outputted.) The send level can be set to an
optional level. Used to check troubles in dialing and to
check the operation. (Only when FAX is installed)
Section
FAX
Item
Operation
Item
Set range
0
EXECUTE
Execution
1
HIGH
High group level
0 - 15dB
2
HIGH LOW
High group - Low group
0 - 15
SIMULATION 66-15
DIAL TEST(20PPS). SELECT 0-1, AND PRESS START.
0. EXECUTE
1. MAKE TIME
7
; [+9 ms]
SIMULATION 66-15
DIAL TEST(20PPS). SELECT 0-15, AND PRESS START.
[1. MAKE TIME]
1
7
SIMULATION 66-15
DIAL TEST(20PPS). EXECUTING···.
1. MAKE TIME
7
; [+9 ms]
Press [CUSTOM SETTINGS] key.
Press [CUSTOM SETTINGS] key
or press [START] key.
or press [START] key.
Select 1 and
press [START] key.
press [START] key.
Select 0
and press
[START] key.
and press
[START] key.
AR-M550/M620 SIMULATION 8 - 92
Operation/Procedure
1) Enter the DTMF signal (1 - 9, 0, *, #) to be sent with 10-key.
2) Press [START] key.
The signal is sent in the max. send level.
When [CUSTOM SETTINGS] key is pressed during execution, the
operation is stopped.
operation is stopped.
Operation/Procedure
1) Enter the DTMF signal (1 - 9, 0, *, #) to be sent with 10-key.
2) Press [START] key.
The signal is sent in the send level set with the soft SW.
When [CUSTOM SETTINGS] key is pressed during execution, the
operation is stopped.
operation is stopped.
Operation/Procedure
1) Select YES/NO of data transfer (backup).
2) Press [START] key.
This function is valid only when the AR-MM9 is installed. (Used only
when it is required to backup the FAX PWB SRAM data for repairing
the FAX PWB.)
when it is required to backup the FAX PWB SRAM data for repairing
the FAX PWB.)
Backup contents
The other contents are not backed up.
Select 0 and press [START] key.
Press [CUSTOM SETTINGS] key.
66-17
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to check the dial signal (DTMF) output in the FAX
tone dial mode. Send level: Max. Used to check the
operation. (Only when FAX is installed)
tone dial mode. Send level: Max. Used to check the
operation. (Only when FAX is installed)
Section
FAX
Item
Operation
Press [START] key.
Press [CUSTOM SETTINGS] key.
SIMULATION 66-16
DIAL TEST(DTMF). SELECT 0-2, AND PRESS START.
0. EXECUTE
1. HIGH
7
(dB) 2. HIGH-LOW
7
SIMULATION 66-16
DIAL TEST(DTMF). SELECT 0-15, AND PRESS START.
1. HIGH(dB)
1
7
Press [CUSTOM SETTINGS] key
or press [START] key.
or press [START] key.
Select 1 or 2, and
press [START] key.
(When 1)
SIMULATION 66-16
DIAL TEST(DTMF). SELECT 0-15, AND PRESS START.
1. HIGH(dB)
7
(When 2)
SIMULATION 66-16
DIAL TEST(DTMF). EXECUTING···.
1. HIGH
7
(dB) 2. HIGH-LOW
7
SIMULATION 66-17
DTMF SIGNAL OUTPUT.(LEVEL MAX) INPUT 0-9, *, #, AND
PRESS START.
1
SIMULATION 66-17
DTMF SIGNAL OUTPUT.(LEVEL MAX) EXECUTING···.
1
66-18
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to check the dial signal (DTMF) output in the FAX
tone dial mode. An output is sent at the send level set
by the soft switch. Used to check the operation. (Only
when FAX is installed)
tone dial mode. An output is sent at the send level set
by the soft switch. Used to check the operation. (Only
when FAX is installed)
Section
FAX
Item
Operation
Press [START] key.
Press [CUSTOM SETTINGS] key.
66-19
Purpose
Data transfer
Function
(Purpose)
(Purpose)
Used to back-up the HDD data into the Flash memory
(optional FAX expansion memory: AR-MM9). (Only
when FAX is installed)
(optional FAX expansion memory: AR-MM9). (Only
when FAX is installed)
Section
FAX
Item
Data
1
YES
Backup is executed.
2
NO
Backup is not executed.
• Address book data (FAX, Mail, Address)
• One-touch dial
• One-touch dial
• Item name
• FTP expansion
• Fine name
• Group expansion
• FAX receive select table
• Program
• IFAX receive YES/NO
• Use index
• Polling allow number
• Standard sender
• Memory box
• IFAX sender registration
• Sender name
• FAX sender registration
• Soft SW
SIMULATION 66-18
DTMF SIGNAL OUTPUT.(SOFT SW.) INPUT 0-9, *, #, AND PRESS
START.
1
SIMULATION 66-18
DTMF SIGNAL OUTPUT.(SOFT SW.) EXECUTING···.
1
Click on the first or last page to see other AR-M550 (serv.man15) service manuals if exist.