Sharp AR-M351U / AR-M451U (serv.man17) Service Manual ▷ View online
AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 65
Operation/Procedure
This simulation is used to change and check the controller soft
SW. Set this setting to the default.
SW. Set this setting to the default.
There is no need to change this setting in the market.
Operation/Procedure
1) Select the number corresponding to the data transfer mode
with 10-key.
*:
When Flash ROM or OP_Flash ROM is not installed, transfer
is not made.
is not made.
2) Press [START] key.
3) The confirmation menu is opened to confirm YES/NO of data
transfer. Select one.
4) Press [START] key.
After completion of transfer, the transfer result is displayed.
If there is no error, the machine is automatically reset after com-
pletion of data transfer.
pletion of data transfer.
If there is an error, "NG" is displayed. (The machine is not reset.)
When restoring from HDD, fit the configurations of the Flash ROM
and the optional Flash ROM at back-up.
and the optional Flash ROM at back-up.
Operation/Procedure
1) Enter the number corresponding to the memory to be checked
with 10-key.
2) Press [START] key.
The memory read/write operation is started.
After starting the operation, "NOW CHECKING" is displayed dur-
ing checking. When read/write is normally completed, "OK" is dis-
played. If an error occurs, "NG" is displayed.
ing checking. When read/write is normally completed, "OK" is dis-
played. If an error occurs, "NG" is displayed.
55-3
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the specifications of the controller
operations. (MFP control PWB)
operations. (MFP control PWB)
Section
Item
Operation Specifications
Press [START] key.
Press [CUSTOM SETTINGS] key or [START] key.
56
56-1
Purpose
Data transfer
Function
(Purpose)
(Purpose)
Used to transfer the MFP controller data. (Used to
repair the PWB.)
repair the PWB.)
Section
MFP controller
Item
Data transfer
1
ALL (EEPROM, SRAM,
FlashROM)
FlashROM)
→
HDD
All the contents of memory are
transferred to HDD. (Similar to
execution of items 3 and 5.)
transferred to HDD. (Similar to
execution of items 3 and 5.)
2
HDD
→
ALL
(EEPROM, SRAM,
FlashROM)
FlashROM)
The HDD contents are transferred
to all the memories. (Similar to
execution of items 4 and 6.)
to all the memories. (Similar to
execution of items 4 and 6.)
3
EEPROM
→
HDD
Transfer from EEPROM to HDD
4
HDD
→
EEPROM
Transfer from HDD to EEPROM
5
SRAM (+ FAX Memory,
+ Option Memory)
+ Option Memory)
→
HDD
Transfer from SRAM to HDD.
When, however, the FAX memory
or an option memory (for FAX
memory) * is installed, the
contents of the Fax memory are
also transferred to HDD.
When, however, the FAX memory
or an option memory (for FAX
memory) * is installed, the
contents of the Fax memory are
also transferred to HDD.
6
HDD
→
SRAM (+ FAX
Memory, + Option
→
Memory)
Transfer from HDD to SRAM.
When, however, the FAX memory
or an option memory (for FAX
memory) * is installed, the
contents HDD are transferred to
the FAX memory as well as the
SRAM.
When, however, the FAX memory
or an option memory (for FAX
memory) * is installed, the
contents HDD are transferred to
the FAX memory as well as the
SRAM.
7
FontROM
→
HDD
Transfer from the font ROM to
HDD
HDD
1
SIMULATION 55-3
MFP SOFT SW. SETTING. SELECT 1-16, AND PRESS START.
1 2 3 4 5 6 7 8
0 0 0 0 1 0 0 1
SIMULATION 55-3
MFP SOFT SW. SETTING. INPUT DATA No(1-8), AND PRESS
START.
SOFT SW-1:
1
YES
Data transfer is executed.
2
NO
Data transfer is not executed.
Press [START] key.
Press [CUSTOM SETTINGS] key or [START] key.
Select 1 and press [START] key.
60
60-1
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the MFP control (DRAM)
operations (read/write).
operations (read/write).
Section
ICU
Item
Operation
1
MFP DRAM
ERDH image memory
2
ASIC DRAM
ASIC image memory
1
SIMULATION 56-1
DATA COPY. SELECT 1-7, AND PRESS START.
1.ALL(EEPROM,SRAM,FlashROM)
→
HDD
2.HDD
→
ALL(EEPROM,SRAM,FlashROM)
3.EEPROM
→
HDD
4.HDD
→
EEPROM
5.SRAM(+FAX Memory,+Option Memory)
→
HDD
6.HDD
→
SRAM(+FAX Memory,+Option Memory)
7.FontROM
→
HDD
1
SIMULATION 56-1
EEPROM
→
HDD DATA COPY.
ARE YOU SURE?.
1. YES
2. NO
SIMULATION 56-1
EEPROM
→
HDD DATA COPY.
COMPLETE (or NG)
AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 66
Operation/Procedure
Used to check if the LSU delivers output of the sync signal
(HSYNC/) or not.
(HSYNC/) or not.
"NOW CHECKING" is displayed during checking. When the test is
normally completed, "OK" is displayed. If an error occurs, "NG" is
displayed.
normally completed, "OK" is displayed. If an error occurs, "NG" is
displayed.
Operation/Procedure
1) Select the number corresponding to the adjustment mode with
10-key.
2) Press [START] key.
3) Enter the adjustment value with 10-key.
4) Enter [START] key.
NOTE: Be sure to set the default value. If not, a trouble may occur
in the LSU.
Operation/Procedure
1) Select the number corresponding to the adjustment mode with
10-key.
2) Press [START] key.
3) Enter the adjustment value with 10-key.
4) Enter [START] key.
NOTE: Be sure to set the default value. If not, a trouble may occur
in the LSU.
Check completion
Press [CUSTOM SETTINGS] key.
61
61-1
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the operation of the scanner (write)
unit (LSU).
unit (LSU).
Section
Scanner (write) unit (LSU)
Item
Operation
Check completion
Press [CUSTOM SETTINGS] key.
SIMULATION 60-1
DRAM TEST. SELECT 1-2, AND PRESS START.
1. ICU DRAM
2. ASIC DRAM
1
SIMULATION 60-1
DRAM TEST. ···NOW CHECKING
1. ICU DRAM
Press [CUSTOM SETTINGS] key.
Press [START] key.
SIMULATION 60-1
DRAM TEST. ···OK (or NG)
1. ICU DRAM
SIMULATION 61-1
LSU TEST. PRESS START.
1. LSU
1
SIMULATION 61-1
LSU TEST. ···NOW CHECKING
1. LSU
Press [CUSTOM SETTINGS] key.
Press [START] key.
SIMULATION 61-1
LSU TEST. ···OK (or NG)
1. LSU
61-2
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the laser power (absolute value) in
the copy mode.
the copy mode.
Section
Scanner (write) unit (LSU)
Item
Operation
Item
Set
range
Default
AR-M351U/
M355U
AR-M451U/
M455U
1 AE
Auto exposure
mode
mode
67 - 150
76
93
2 CHARA. Text mode
3 MIX
Text/Photo
mode
mode
4 PHOTO Photo mode
Press [START] key.
Press [CUSTOM SETTINGS] key or [START] key.
61-3
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the laser power (absolute value) in
the FAX mode.
the FAX mode.
Section
Scanner (write) unit (LSU)
Item
Operation
Set range
67 - 150
Default
76 (AR-M351U/M355U)
93 (AR-M451U/M455U)
93 (AR-M451U/M455U)
SIMULATION 61-2
LASER POWER SETTING(COPY). SELECT 1-4, AND PRESS START.
1.AE
93
2.CHARA.
93
3.MIX
93
4.PHOTO
93
1
SIMULATION 61-2
LASER POWER SETTING(COPY). INPUT VALUE 67-150, AND PRESS
START.
1.AE
93
AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 67
Operation/Procedure
1) Select the number corresponding to the adjustment mode with
10-key.
2) Press [START] key.
3) Enter the adjustment value with 10-key.
4) Enter [START] key.
NOTE: Be sure to set the default value. If not, a trouble may occur
in the LSU.
Operation/Procedure
1) Select YES/NO of hard disk format.
2) Press [START] key.
During formatting, "EXECUTING" is displayed. When formatting is
completed normally, "OK" is displayed. If not, "NG" is displayed.
completed normally, "OK" is displayed. If not, "NG" is displayed.
Operation/Procedure
1) Select YES/NO of hard disk read/write check.
2) Press [START] key.
During testing, "EXECUTING" is displayed. When test is com-
pleted normally, "OK" is displayed. If not, "NG" is displayed.
pleted normally, "OK" is displayed. If not, "NG" is displayed.
Press [START] key.
Press [CUSTOM SETTINGS] key or [START] key.
61-4
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the laser power (absolute value) in
the printer mode.
the printer mode.
Section
Scanner (write) unit (LSU)
Item
Operation
Set range
67-150
Default
76 (AR-M351U/M355U)
93 (AR-M451U/M455U)
93 (AR-M451U/M455U)
Press [START] key.
Press [CUSTOM SETTINGS] key or [START] key.
62
62-1
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to format the hard disk.
(Only in the model with a disk installed)
(Only in the model with a disk installed)
Section
MFP controller (HDD)
Item
Clear
1
YES
Execution
2
NO
Cancel
SIMULATION 61-3
LASER POWER SETTING(FAX). PRESS START.
1.FAX
110
1
SIMULATION 61-3
LASER POWER SETTING(FAX). INPUT VALUE 67-150, AND PRESS
START.
1.FAX
110
SIMULATION 61-4
LASER POWER SETTING(PRINTER). PRESS START.
1.PRINTER
100
1
SIMULATION 61-4
LASER POWER SETTING(PRINTER). INPUT VALUE 67-150, AND
PRESS START.
1.PRINTER
100
Completion
Press [CUSTOM SETTINGS] key.
62-2
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the operation of the hard disk (read/
write). (Only in the model with a disk installed)
(Partial check)
write). (Only in the model with a disk installed)
(Partial check)
Section
MFP controller (HDD)
Item
Operation
1
YES
Execution
2
NO
Cancel
Completion
Press [CUSTOM SETTINGS] key.
SIMULATION 62-1
HDD FORMAT.
ARE YOU SURE?
1. YES
2. NO
1
SIMULATION 62-1
HDD FORMAT. EXECUTING···.
Press [START] key.
SIMULATION 62-1
HDD FORMAT. OK. (or NG)
SIMULATION 62-2
HDD R/W TEST.
ARE YOU SURE?
1. YES
2. NO
1
Press [START] key.
SIMULATION 62-2
HDD R/W TEST. EXECUTING···.
SIMULATION 62-2
HDD R/W TEST. OK. (or NG)
AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 68
Operation/Procedure
1) Select YES/NO of hard disk read/write check.
2) Press [START] key.
During testing, "EXECUTING" is displayed. When test is com-
pleted normally, "OK" is displayed. If not, "NG" is displayed.
pleted normally, "OK" is displayed. If not, "NG" is displayed.
Operation/Procedure
1) Select the number corresponding to the self diag check mode.
2) Press [START] key.
During the self diag operation, "EXECUTING" is displayed.
If the self diag is completed normally, "0" is displayed. If not, any
value but 0 is displayed.
value but 0 is displayed.
* = SHORT SELF-TEST, EXTENDED SELF-TEST
Operation/Procedure
1) Enter 1 with 10-key.
2) Press [START] key.
The result of the hard disk operation check (the self diag operation
of the SMART function) is printed out.
of the SMART function) is printed out.
62-3
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the operation of the hard disk (read/
write). (Only in the model with a disk installed)
(All areas check)
write). (Only in the model with a disk installed)
(All areas check)
Section
MFP controller (HDD)
Item
Operation
1
YES
Execution
2
NO
Cancel
Completion
Press [CUSTOM SETTINGS] key.
62-6
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the operations of the hard disk.
(The self diag operation of the SMART function is
executed.) (Only in the model with a disk installed)
(The self diag operation of the SMART function is
executed.) (Only in the model with a disk installed)
Section
MFP controller (HDD)
Item
Clear
1
SHORT SELF-TEST
Partial test
2
EXTENDED SELF-TEST
All areas test
SIMULATION 62-3
HDD R/W TEST(ALL).
ARE YOU SURE?
1. YES
2. NO
1
Press [START] key.
SIMULATION 62-3
HDD R/W TEST(ALL). EXECUTING···.
SIMULATION 62-3
HDD R/W TEST(ALL). OK. (or NG)
Completion
Press [CUSTOM SETTINGS] key.
62-7
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the operations of the hard disk.
(The result of the self diag operation of the
SMART function is printed out.) (Only in the model
with a disk installed)
(The result of the self diag operation of the
SMART function is printed out.) (Only in the model
with a disk installed)
Section
MFP controller (HDD)
Item
Clear
0
TRAY SELECT
Tray select auto only (Selection inhibited)
1
PRINT START
Print start
Select 1 and
press [START] key.
press [START] key.
Press [CUSTOM SETTINGS] key
or [START] key.
or [START] key.
SIMULATION 62-6
SMART OFFLINE TEST.
1. SHORT SELF-TEST
2. EXTENDED SELF-TEST
1
SIMULATION 62-6
*. EXECUTING···.
Press [START] key.
SIMULATION 62-6
*. COMPLETE.. (result: 0)
SIMULATION 62-7
SMART ERROR LOG PRINT OUT. SELECT SETTING, AND PRESS
START.
0. TRAY SELECT :AUTO ONLY
1. PRINT START
1
0
SIMULATION 62-7
SMART ERROR LOG PRINT OUT. EXECUTING···
0. TRAY SELECT :
1
Click on the first or last page to see other AR-M351U / AR-M451U (serv.man17) service manuals if exist.