Sharp AR-M35 / AR-M450 (serv.man32) User Manual / Operation Manual ▷ View online
31
SPECIFICATIONS
Copier
Resolution
Scan: 600 dpi or 300 dpi, output: 600 dpi
Gradation
Scan: 256 levels, output: 2 levels
Originals
Sheets, bound documents
Maximum size: 11" x 17" or A3
Maximum size: 11" x 17" or A3
Copy sizes
Max. 11" x 17" or A3, min. 5-1/2" x 8-1/2" or A5
Image loss: Max 21/64" or 8 mm (leading edge and trailing edge in total), max. 21/
64" or 8 mm (along all other edges in total)
Image loss: Max 21/64" or 8 mm (leading edge and trailing edge in total), max. 21/
64" or 8 mm (along all other edges in total)
Warm-up time
Approx. 80 seconds
First-copy time*
35 copy/min. type: 5.3 seconds
45 copy/min. type: 4.6 seconds
* Paper is fed from paper tray 1, quick scan from document glass (page 33) is set,
45 copy/min. type: 4.6 seconds
* Paper is fed from paper tray 1, quick scan from document glass (page 33) is set,
the original scanning resolution on the document glass is set to 600 x 300 dpi
and no optional hard disk drive is installed.
and no optional hard disk drive is installed.
Copy ratio
Variable: 25 to 400% in 1% increments, total 376 steps
Fixed presets: 25%, 64%, 77%, 100%, 121%, 129%, and 400% for inch system,
25%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, and 400% for AB system
25%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, and 400% for AB system
Continuous copy
999 copies; subtractive counter
Scanner module
Name
B/W scanner module/DSPF
Type
Two-side simultaneous scanning system from the document feeder.
One-sided scanning from the document glass
One-sided scanning from the document glass
Original feed system
Automatic continuous feeding
Original exit system
Face down output
Original transport system
DSPF: sheet through type (reference position: center), document glass: reference
position is left rear
Original setting direction
Face down
Original sizes
5-1/2" x 8-1/2" to 11" x 17" or A5 to A3
Original weight
14 to 34 lbs. or 50 to 128
g
/m
2
Capacity
Up to 50 sheets (30 sheets*
1
for 8-1/2" x 14" or B4 or larger originals) provided the
total aggregate thickness does not exceed 1/4" or 6.5 mm (14 to 20 lbs. or 50 to 80
g
/m
2
) or 3/16" or 5 mm (21 to 34 lbs. or 80 to 128
g
/m
2
)
Power supply
Drawn from the main unit
Dimensions
31-13/16" (W) x 24-3/8" (D) x 7-3/32" (H) or
808 mm (W) x 619 mm (D) x 180 mm (H)
808 mm (W) x 619 mm (D) x 180 mm (H)
Weight
Approx. 43 lbs. or 19.5 k
g
*1 For paper heavier than 28 lbs. (105
g
/m
2
), only a stack of up to 15 sheets can be set. If 16 or more sheets are set,
image can not be scanned properly and scanned image can be expanded compared with original itself.
Copying speed
45 copy/min. type
11" x 17" or A3
20 copies/min.
8-1/2" x 14" or B4
22 copies/min.
8-1/2" x 11" or A4
45 copies/min.
8-1/2" x 11"R or A4R
30 copies/min
Copying speed
35 copy/min. type
11" x 17" or A3
17 copies/min.
8-1/2" x 14" or B4
20 copies/min.
8-1/2" x 11" or A4
35 copies/min.
8-1/2" x 11"R or A4R
25 copies/min.
32
KEY OPERATOR PROGRAMS
This section describes all key operator programs relating only to the copier and facsimile functions. For the key
operator programs which relate to copier, printer and facsimile functions, see the “Operation manual (for printer operation
and general information)”.
operator programs which relate to copier, printer and facsimile functions, see the “Operation manual (for printer operation
and general information)”.
Program name
Page
Copy function settings
Initial status settings
33
Exposure adjustment
33
Rotation copy setting
33
Auto paper selection setting
33
600dpi x 600dpi scanning mode
33
Quick scan from document glass
33
Device control
Original size detector setting
34
Disabling of document feeder
34
Using the key operator programs
To use of the key operator programs, follow the procedures described in the “Operation manual (for printer operation
and general information)” on page 7-6. Also read “Supplementary explanation of key operation for key operator programs”
on page 7-6.
and general information)” on page 7-6. Also read “Supplementary explanation of key operation for key operator programs”
on page 7-6.
Key operator program list
33
Setting programs
This section describes the setting of programs common
to copier, facsimile and network scanning features. For
programs dedicated to facsimile, network scanning and
programs common to both the copier and printer features,
see their respective manuals.
to copier, facsimile and network scanning features. For
programs dedicated to facsimile, network scanning and
programs common to both the copier and printer features,
see their respective manuals.
Copy function settings
The following programs can be set in “Copy function
settings”.
settings”.
●
Initial status settings
●
Exposure adjustment
●
Rotation copy setting
●
Auto paper selection setting
●
600dpi x 600dpi scanning mode
●
Quick scan from document glass
Initial status settings
The copier settings will be reset when the main switch
is turned off, when the [CA] key is pressed or when
the auto clear interval has elapsed. Use this program
to establish new initial settings or to return the initial
settings to the factory default settings. Paper tray,
exposure mode, copy ratio, duplex mode, and output
mode default settings can be made.
is turned off, when the [CA] key is pressed or when
the auto clear interval has elapsed. Use this program
to establish new initial settings or to return the initial
settings to the factory default settings. Paper tray,
exposure mode, copy ratio, duplex mode, and output
mode default settings can be made.
NOTE
If a duplex mode other than 1-sided to 1-sided is set as
the default and either the duplex or scanner mode is
disabled*, the default will change to the 1-sided to 1-sided
mode.
* Disable duplex unit (page 7-10 of the “Operation manual
If a duplex mode other than 1-sided to 1-sided is set as
the default and either the duplex or scanner mode is
disabled*, the default will change to the 1-sided to 1-sided
mode.
* Disable duplex unit (page 7-10 of the “Operation manual
(for printer operation and general information)”)
* Disabling of document feeder (page 34)
Exposure adjustment
Use this program to lighten or darken copies in the
automatic exposure mode. The factory setting is “5”.
“1” indicates lighter density and “9” indicates darker
density on the touch panel.
automatic exposure mode. The factory setting is “5”.
“1” indicates lighter density and “9” indicates darker
density on the touch panel.
Rotation copy setting
If this program is set, the image of originals will rotate
when the orientation of the originals does not match
that of the copy paper.
(Rotation copy will function only if the auto paper
select or auto image mode has been selected.)
when the orientation of the originals does not match
that of the copy paper.
(Rotation copy will function only if the auto paper
select or auto image mode has been selected.)
NOTE
For copying from 5-1/2 x 8-1/2 or A5 size originals onto 5-
1/2 x 8-1/2R or A5R paper, this program must be set.
For copying from 5-1/2 x 8-1/2 or A5 size originals onto 5-
1/2 x 8-1/2R or A5R paper, this program must be set.
Auto paper selection setting
Use this program to set the paper type* for the auto
paper select mode to “Plain paper” or “Plain paper
and recycle paper”.
* Paper type specified in Tray setting of the custom
paper select mode to “Plain paper” or “Plain paper
and recycle paper”.
* Paper type specified in Tray setting of the custom
setting function (page 1-20 of “Operation manual
(for printer operation and general information)”)
(for printer operation and general information)”)
600dpi x 600dpi scanning mode
Use this program to change the original scanning
resolution of the automatic document feeder from
600 x 300 dpi to 600 x 600 dpi.
If this mode is set, the copy quality for fine
characters and fine lines will be improved but the
original scanning speed will be slower.
resolution of the automatic document feeder from
600 x 300 dpi to 600 x 600 dpi.
If this mode is set, the copy quality for fine
characters and fine lines will be improved but the
original scanning speed will be slower.
NOTE
If the original scanning speed is more important than higher
resolution, do not set this program.
If the original scanning speed is more important than higher
resolution, do not set this program.
Quick scan from document glass
Use this program to change the original scanning
resolution on the document glass from 600 x 600dpi
to 600 x 300 dpi.
If you set this program, the first copy time will be
shorter but the copy image will become a little more
coarse.
resolution on the document glass from 600 x 600dpi
to 600 x 300 dpi.
If you set this program, the first copy time will be
shorter but the copy image will become a little more
coarse.
NOTE
If the copy image quality is more important than first copy
time, do not set this program.
If the copy image quality is more important than first copy
time, do not set this program.
KEY OPERATOR PROGRAMS
34
Device control
Original size detection and disabling of the document
feeder can be set.
feeder can be set.
Original size detector setting
This program is used to select the group of original
sizes to be detected. Original size detection from
the document glass can be disabled using the
program CANCEL DETECTION AT DOCUMENT
GLASS.
sizes to be detected. Original size detection from
the document glass can be disabled using the
program CANCEL DETECTION AT DOCUMENT
GLASS.
If CANCEL DETECTION AT DOCUMENT GLASS
is set, originals will be regarded as EXTRA for all
copier functions and no original size will be displayed.
is set, originals will be regarded as EXTRA for all
copier functions and no original size will be displayed.
Disabling of document feeder
This program is used to prevent use of the automatic
document feeder when the scanner module
malfunctions. In this case scanning can still be done
off the document glass.
document feeder when the scanner module
malfunctions. In this case scanning can still be done
off the document glass.
KEY OPERATOR PROGRAMS
Detectable original sizes
Group
Document feeder tray (for automatic document feeding)
Document glass
11 x 17, 8-1/2 x 14,
11 x 17, 8-1/2 x 14,
1
INCH - 1
8-1/2 x 11, 8-1/2 x 11R,
A4
5-1/2 x 8-1/2
11 x 17, 8-1/2 x 13,
11 x 17, 8-1/2 x 13,
2
INCH - 2
8-1/2 x 11,8-1/2 x 11R,
A4
5-1/2 x 8-1/2
3
AB - 1
A3, A4, A4R, A5,
8-1/2 x 11,
B4, B5, B5R
216 x 330
4
AB - 2
A3, A4, A4R, A5,
8-1/2 x 11,
B5, B5R, 216 x 330
B4
Click on the first or last page to see other AR-M35 / AR-M450 (serv.man32) service manuals if exist.