Sharp AR-M35 / AR-M450 (serv.man32) User Manual / Operation Manual ▷ View online
11
Automatic two-sided copying from the automatic document
feeder
feeder
A duplex module must be installed for automatic 1-sided to 2-sided or 2-sided to 2-sided copying. A duplex module is
not needed for 2-sided to 1-sided copying.
not needed for 2-sided to 1-sided copying.
1. Automatic two-sided copying from one-sided
originals
2. Automatic two-sided copying from two-sided
originals
3. Automatic one-sided copying from two-sided
originals
1
Place the originals in the document feeder tray.
(page 7)
(page 7)
2
Touch the [2-SIDED COPY] key.
2-SIDED COPY
OUTPUT
3
Select the desired duplex copy mode.
BIN
CHA
The illustration to the left
shows the screen
displayed when a duplex
module is installed.
shows the screen
displayed when a duplex
module is installed.
Original
Copy
NORMAL COPYING
4
Touch the [OK] key.
BINDING
CHANGE
CHANGE
OK
Follow step 6 on page 9 to step 9 on page 10.
The image to be copied onto the second side of 2-sided
copies can be inverted so that the resultant 2-sided copies
are in the correct orientation for binding at the top. For top
binding, touch the [BINDING CHANGE] key on the 2-sided
copy selection screen.
copies can be inverted so that the resultant 2-sided copies
are in the correct orientation for binding at the top. For top
binding, touch the [BINDING CHANGE] key on the 2-sided
copy selection screen.
12
Copying from the document glass
When copying originals which cannot be fed from the automatic document feeder such as thick originals, open the
document cover and copy the originals from the document glass
document cover and copy the originals from the document glass
■
■
■
■
■
1-sided copies of 1-sided originals
1
Set an original on the document glass. (page 7)
Original size detector
●
Set an original by aligning its corner with the tip of the
scale ( ) mark at the left rear corner of the glass as shown
in the illustrations.
scale ( ) mark at the left rear corner of the glass as shown
in the illustrations.
2
Ensure that the 1-sided to 1-sided copy mode is
selected.
selected.
ORIGINAL
A4
A4
A4
A3
A4
A4R
1.
2.
3.
4.
3.
4.
The one-sided to one-
sided mode is selected
when no icon for a two-
sided mode appears in the
dashed area on the display.
If the 1-sided to 1-sided
copy mode is already
selected, steps 3 to 5 are
sided mode is selected
when no icon for a two-
sided mode appears in the
dashed area on the display.
If the 1-sided to 1-sided
copy mode is already
selected, steps 3 to 5 are
not needed.
3
Ensure that paper of the same size as the original
is automatically selected. (
is automatically selected. (
✼
Note)
COPY RATIO
AUTO
PAPER SELECT
100
%
A4
The selected tray will be
highlighted or the message
“LOAD xxxxxx PAPER.” will
appear. If the message
appears, load paper in a
paper tray or the bypass tray
with paper of the required
size. Even if the message
above is displayed,
copying can be performed
onto the currently selected
paper.
highlighted or the message
“LOAD xxxxxx PAPER.” will
appear. If the message
appears, load paper in a
paper tray or the bypass tray
with paper of the required
size. Even if the message
above is displayed,
copying can be performed
onto the currently selected
paper.
(
✼
Note) The following conditions must be satisfied.
●
Originals of a standard size (11" x 17", 8-1/2" x 14", 8-1/2"
x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A3, B4, A4, A4R or A5)
are set and the auto paper select function is enabled.
x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A3, B4, A4, A4R or A5)
are set and the auto paper select function is enabled.
TRANSPA
A4
1
X
A4
A3
1.
2.
3.
PLAIN
PLAIN
If originals of a size other
than the sizes above are to
be copied, manually select
the desired paper size.
than the sizes above are to
be copied, manually select
the desired paper size.
Original
Copy
NORMAL COPYING
or B4
Original scale
mark
Original scale
mark
8
1
2
/ x
11 or A4
8
1
2
/ x
11R or A4R
8
1
2
/ x
14
11x17 or A3
or B4
5
1
2
/
8
1
2
/
x
or A5
13
4
Select the desired output mode (see below).
2-SIDED COPY
OUTPUT
When a document is
detected on the document
glass, the group mode will
be automatically selected.
To select sort copy, touch
the [OUTPUT] key, then
touch the [SORT] key on the
displayed screen, and then
touch the [OK] key.
detected on the document
glass, the group mode will
be automatically selected.
To select sort copy, touch
the [OUTPUT] key, then
touch the [SORT] key on the
displayed screen, and then
touch the [OK] key.
NOTE
If you touch the [SORT] or [GROUP] key, its corresponding
icon will appear on the touch panel. To change the
selection, touch the icon to return the display to the output
setting screen.
If you touch the [SORT] or [GROUP] key, its corresponding
icon will appear on the touch panel. To change the
selection, touch the icon to return the display to the output
setting screen.
5
Use the numeric keys to set the desired number
of copies.
of copies.
Up to 999 can be set.
Use the [C] (clear) key to
cancel an entry if a mistake
has been made.
Use the [C] (clear) key to
cancel an entry if a mistake
has been made.
NORMAL COPYING
When originals are placed in the document feeder tray, a
sort icon will appear on the touch panel and the sort
copy mode will be automatically selected. In this case,
copies will be delivered as shown in the upper illustration
to the left. For output in the group mode as shown in the
lower left illustration, the group mode must be selected
on the output setting screen.
sort icon will appear on the touch panel and the sort
copy mode will be automatically selected. In this case,
copies will be delivered as shown in the upper illustration
to the left. For output in the group mode as shown in the
lower left illustration, the group mode must be selected
on the output setting screen.
Output mode (sort copy and group copy)
[Example] Five sets of copies from three originals
●
●
●
●
●
Sort copy
Five sets of copies
Originals
6
Press the [START] key.
Replace the original with
the next original and press
the [START] key. Repeat
this operation until all
originals have been
scanned.
If sort was selected in step
4, go to the next step.
the next original and press
the [START] key. Repeat
this operation until all
originals have been
scanned.
If sort was selected in step
4, go to the next step.
7
Touch the [READ-END] key.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED
WHEN FINISHED
,
PRESS [READ-END].
READ-END
●
●
●
●
●
Group copy
Five copies of each original
Originals
14
Automatic two-sided copying from the document glass
A duplex module must be installed for automatic 1-sided to 2-sided or 2-sided to 2-sided copying. A duplex module is
not needed for 2-sided to 1-sided copying.
not needed for 2-sided to 1-sided copying.
1
Place an original on the document glass.
(page 7)
(page 7)
2
Touch the [2-SIDED COPY] key.
2-SIDED COPY
OUTPUT
3
Touch the [1-sided to 2-sided copy] key.
Original
Copy
NORMAL COPYING
The image to be copied onto the second side of 2-sided
copies can be inverted so that the resultant 2-sided copies
are in the correct orientation for binding at the top. For top
binding, touch the [BINDING CHANGE] key on the 2-sided
copy selection screen.
copies can be inverted so that the resultant 2-sided copies
are in the correct orientation for binding at the top. For top
binding, touch the [BINDING CHANGE] key on the 2-sided
copy selection screen.
4
Touch the [OK] key.
BINDING
CHANGE
CHANGE
OK
Follow step 3 on page 12 to step 7 on page 13.
Click on the first or last page to see other AR-M35 / AR-M450 (serv.man32) service manuals if exist.