Sharp AR-M35 / AR-M450 (serv.man12) Service Manual ▷ View online
AR-M350 SIMULATIONS 10-22
<List of display values>
<List of display value>
<List of display values>
22-6
Purpose
Adjustment, setup, operation data output, check
(print)
(print)
Function (Content)
Used to print the list of adjustments and setup
data (simulations, FAX soft switches, counters).
data (simulations, FAX soft switches, counters).
Section
Item
Item
Data
Operation/Procedure the selected data is displayed on the menu box.
0
TRAY SELECT auto only (no selection)
1
PRINT START
22-7
Purpose
User data output, check (display)
Function (Content)
Used to display the key operator code.
(Used when the customer has forgotten the key
operator code.)
(Used when the customer has forgotten the key
operator code.)
Section
Item
Item
Data
Operation/Procedure The key operator code is displayed.
SIMULATION 22-6
DATA PRINT MODE, SELECT SETTING,AND PRESS START.
0. TRAY SELECT
DATA PRINT MODE, SELECT SETTING,AND PRESS START.
0. TRAY SELECT
:AUTO ONLY
1. PRINT START
1
SIMULATION 22-6
DATA PRINT MODE.. EXECUTING...
0.TRAY SELECT
DATA PRINT MODE.. EXECUTING...
0.TRAY SELECT
:
0
1
When "1" is selected,
press [START] key.
press [START] key.
SIMULATION 22-7
KEY OPERATOR CODE DISPLAY.
CODE: *****
KEY OPERATOR CODE DISPLAY.
CODE: *****
22-8
Purpose
Adjustment, setup, operation data output, check
(display)
(display)
Function (Content)
Used to check the number of times the staple,
and scanner (reading) unit.
and scanner (reading) unit.
Section
Item
Item
Counter
Operation/Procedure The counter data below are displayed.
SPF
Number of times of document feed
SCAN
Number of times of scan
STAPLER
Number of times of stapling
PUNCH
Number of times of punching
STAMP
Number of times of SPF finish stamp
22-9
Purpose
Adjustment, setup, operation data output, check
(display)
(display)
Function (Content)
Used to check the number of times
(print quantity) of each paper feed section.
(print quantity) of each paper feed section.
Section
Paper feed
Item
Counter
Operation/Procedure The counter data below are displayed.
TRAY1
Use quantity of tray 1
TRAY2
Use quantity of tray 2 (Multi purpose tray)
TRAY3
Use quantity of tray 3/LCC left tray
(Common to Desk/LCC)
(Common to Desk/LCC)
TRAY4
Use quantity of tray 4/LCC right tray (Desk/LCC)
BPT
Use quantity of manual feed tray
ADU
Use quantity of duplex paper feed
SIMULATION 22-8
ORG./STAPLE COUNTER DATA DISPLAY.
SPF: ********
SCAN
ORG./STAPLE COUNTER DATA DISPLAY.
SPF: ********
SCAN
: ********
STAPLER : ******** PUNCH
: ********
STAMP
: ********
SIMULATION 22-9
PAPER FEED COUNTER DATA DISPLAY.
TRAY1: ********
PAPER FEED COUNTER DATA DISPLAY.
TRAY1: ********
TRAY2 : ********
TRAY3 : ********
TRAY4 : ********
BPT : ********
ADU : ********
'' !"#$%&
AR-M350 SIMULATIONS 10-23
<List of display value>
<List of machine model codes>
22-10
Purpose
Adjustment, setup, operation data output, check
(display)
(display)
Function (Content)
Used to check the system configuration
(option, internal hardware).
(option, internal hardware).
Section
Item
Item
Spec
Operation/Procedure The machine composition below is displayed.
MACHINE
AR-P350/350LP , AR-P450/450LP,
AR-M350/350M, AR-M450/450M
AR-M350/350M, AR-M450/450M
SPF
NONE/ (Model code)
DSPF
NONE/ (Model code)
FINISHER
NONE/ (Model code)
MAIL BIN
NONE/ (Model code)
PUNCH
NONE/ (Model code)
DESK/LCC
NONE/ (Model code)
ADU
NONE/ (Model code)
SPEED
Machine speed 35/45 (CPM)
PROCESS TYPE
Process control spec
(1, 2: AR machine 3: DM machine)
(1, 2: AR machine 3: DM machine)
SYSTEM MEMORY
Memory capacity (MB)
HDD
Hard disk capacity (MB)
ICU
PRINTER/MFP
NIC
NONE/ (Model code)
NSCN
NONE/ (Network scanner)
PS3
NONE/ (PS3 expansion kit)
FAX
NONE/ (Model code)
FAX MEMORY
FAX expansion memory capacity (MB)
HAND SET
NONE/ (Model code)
STAMP
Finisher stamp NONE/ (Model code)
SIMULATION 22-10
SYSTEM INFORMATION.
MACHINE: *******
SPF: ******* XXXXXXXXXXX
FINISHER : *******
SYSTEM INFORMATION.
MACHINE: *******
SPF: ******* XXXXXXXXXXX
FINISHER : *******
MAIL BIN : *******
PUNCH : ******
DESK/LCC : *******
ADU: ******* XXXXXXXXXXXX
PROCESS TYPE : *
SYSTEM MEMORY: **MB
SYSTEM MEMORY: **MB
HDD: ***MB ICU F ******
NIC : ******* NSCN : ******
PS3 : ******
FAX: ******* FAX MEMORY : **MB
HAND SET: *******
STAMP : *******
Item
Display
Content
MACHINE
AR-P350/350LP
AR-P450/450LP
AR-M350/350M
AR-M450/450M
SPF
-
Document feed unit not installed
AR-EF2
Document feed unit (SPF) installed
AR-EF1
Duplex document feed unit installed
FINISHER
-
After-work unit not installed
AR-FN6
Built-in finisher installed
AR-FN7
Console finisher installed
MAIL BIN
-
Mail bin not installed
AR-MS1
Mail bin installed
Punch unit
-
Punch unit not installed
AR-PN1A
Punch unit 2 holes
AR-PN1B
Punch unit 3 holes
AR-PN1C
Punch unit 4 holes
AR-PN1D
Punch unit 4 holes wide hole
ADU
-
Duplex module not installed
AR-DU3
Duplex module installed
AR-DU4
Duplex module +
manual feed unit installed
manual feed unit installed
DESK
-
Paper feed desk not installed
AR-MU1
Multi-purpose tray installed
AR-D14
Paper feed desk installed
AR-D13
Tandem desk installed
ICU
PRINTER
Printer board
AR-M11
MFP board
MEMORY
0MB
No expansion memory
***MB
Expansion memory ***MB
HD
0MB
Hard disk not installed
****MB
Hard disk installed (AR-HD3)
NIC
-
NIC not installed
AR-NC5J
NIC installed
PS3
expansion kit
expansion kit
-
PS3 expansion kit not installed
AR-PK1
PS3 expansion kit installed
FAX
-
FAX expansion kit installed
AR-FX5
FAX expansion kit not installed
Network
scanner
scanner
-
Network expansion kit not installed
AR-NS2F
Network expansion kit installed
Expansion
memory
memory
-
Expansion memory for FAX not
installed
installed
AR-MM9
Expansion memory for FAX 8MB
(AR-MM9) installed
(AR-MM9) installed
Handset
-
handset not installed
AR-HN5
Handset installed
Finish stamp
-
Finish stamp unit not installed
AR-SU1
Finish stamp unit installed
' !"#$%&
AR-M350 SIMULATIONS 10-24
<List of display values>
<Jam code table>
<List of display values>
<List of display values>
22-11
Purpose
Adjustment, setup, operation data output, check
(display)
(display)
Function (Content)
Used to check the use frequency of FAX.
(send/receive) (Only when FAX is installed.)
(send/receive) (Only when FAX is installed.)
Section
FAX
Item
Data
Operation/Procedure The counter data below are displayed.
FAX SEND
Number of times of FAX sending
FAX RECEIVE
Number of times of FAX receiving
FAX OUTPUT
FAX print quantity
SEND IMAGES
Quantity of sending
SEND TIME
Time for sending
RECEIVE TIME
Time for receiving
22-12
Purpose
Adjustment, setup, operation data output, check
(display)
(display)
Function (Content)
Used to check the misfeed position and the
number of misfeed at that position.
(If the number of misfeed is considerably great,
the machine must be repaired.)
number of misfeed at that position.
(If the number of misfeed is considerably great,
the machine must be repaired.)
Section
DSPF
Item
Trouble
Operation/Procedure The history of the latest 50 paper jams is
displayed. (Refer to the jam code table below.)
Code
Description
SPSD_N
SPSD not-reaching jam
SPSD_S
SPSD remaining jam
SPOD_N
SPOD not-reaching jam
SPOD_S
SPOD remaining jam
SPSDSCN
Exposure start timer end
SIMULATION 22-11
FAX COUNTER DATA DISPLAY.
FAX SEND : ********
FAX COUNTER DATA DISPLAY.
FAX SEND : ********
FAX RECEIVE : ********
FAX OUTPUT : ********
SEND IMAGES : ********
SEND IMAGES : ********
SEND TIME : ********:**:**
RECEIVE TIME : ********:**:**
SIMULATION 22-12
SPF JAM HISTORY.
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
SPF JAM HISTORY.
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
...............
(10 lines x 80 digits = 800 characters)
22-13
Purpose
Adjustment, setup, operation data output, check
(display)
(display)
Function (Content)
Used to display the process cartridge data.
Section
Item
Item
Counter
Operation/Procedure The counter data below are displayed.
DRUM
Drum cartridge counter
Count value (counts)
Rotating time (sec)
Rotating time (sec)
TONER
Toner cartridge counter
Count value (counts)
Rotating time (sec)
Rotating time (sec)
DEVE
Developer cartridge counter
Count value (counts)
Rotating time (sec)
Rotating time (sec)
22-19
Purpose
Adjustment, setup, operation data output, check
(display, print)
(display, print)
Function (Content)
Used to display the scanner mode counter.
Section
Item
Item
Counter
Operation/Procedure The counter values related to the network
scanner are displayed.
NETWORK SCANNER
ORIGINAL COUNTER
ORIGINAL COUNTER
Number of scanned documents
(total of OC and SPF)
(total of OC and SPF)
MAIL COUNTER
Number of times of mail sending
FTP COUNTER
Number of times of FTP sending
SIMULATION 22-13
PROCESS CARTRIDGE DATA DISPLAY.
DRUM : ********(counts) **********(sec.)
TONER : ********(counts) **********(sec.)
DEVE : *********(counts) **********(sec.)
PROCESS CARTRIDGE DATA DISPLAY.
DRUM : ********(counts) **********(sec.)
TONER : ********(counts) **********(sec.)
DEVE : *********(counts) **********(sec.)
SIMULATION 22-19
NETWORK SCANNER COUNTER DISPLAY.
NETWORK SCANNER COUNTER DISPLAY.
NETWORK SCANNER ORIGINAL COUNTER : *********
MAIL COUNTER : ********
FTP COUNTER : ********
MAIL COUNTER : ********
FTP COUNTER : ********
'( !"#$%&
AR-M350 SIMULATIONS 10-25
<List of set values>
<List of set values>
<List of set values>
<List of set values>
Main code 24
24-1
Purpose
Data clear
Function (Content)
Used to clear the misfeed counter, misfeed
history, trouble counter, and trouble history.
(After completion of maintenance, these
counters must be cleared.)
history, trouble counter, and trouble history.
(After completion of maintenance, these
counters must be cleared.)
Section
Item
Item
Counter
Operation/Procedure Select with 10 digit key pad and press START
key.
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
PAPER JAM
Number of times of paper jam
SPF JAM
Number of times of SPF jam
TROUBLE
Number of times of troubles
24-2
Purpose
Data clear
Function (Content)
Used to clear the number of use (print quantity)
of each paper feed section.
of each paper feed section.
Section
Paper feed
Item
Counter
Operation/Procedure Select with 10 digit key pad and press START
key.
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
1
Tray 1 use quantity
2
Tray 2 use quantity
3
Tray 3/LCC left tray use quantity
4
Tray 4/LCC right tray use quantity
5
Manual feed tray use quantity
6
Duplex paper feed use quantity
1
SIMULATION 24-1
PAPER JAM COUNTER DATA CLEAR.
ARE YOU SURE ?
1. YES
2. NO
PAPER JAM COUNTER DATA CLEAR.
ARE YOU SURE ?
1. YES
2. NO
1
SIMULATION 24-1
JAM/ TROUBLE COUNTER DATA CLEAR.SELECT1-3,AND
PRESS START.
1. PAPER JAM
2. SPF JAM
3. TROUBLE
JAM/ TROUBLE COUNTER DATA CLEAR.SELECT1-3,AND
PRESS START.
1. PAPER JAM
2. SPF JAM
3. TROUBLE
Press [START] key.
Press [CUSTOM SETTING] key
or [START] key.
1
SIMULATION 24-2
TRAY1 COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
TRAY1 COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
SIMULATION 24-2
PAPER FEED COUNTER DATA CLEAR.SELECT1-6,AND PRESS START.
1. TRAY1 2. TRAY2
3. TRAY3/LCC1
PAPER FEED COUNTER DATA CLEAR.SELECT1-6,AND PRESS START.
1. TRAY1 2. TRAY2
3. TRAY3/LCC1
2. TRAY4/LCC2
5. BPT
6. ADU
Press [START] key.
Press [CUSTOM SETTING] key
or [START] key.
24-3
Purpose
Data clear
Function (Content)
Used to clear the number of use of the staple,
DSPF and the scanner (reading) unit.
DSPF and the scanner (reading) unit.
Section
Item
Item
Counter
Operation/Procedure Select with 10 digit key pad and press START
key.
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
1
SPF paper passing quantity
2
Number of times of document scan
3
Number of times of stapling
4
Number of times of punching
5
Number of times of finish stamp
24-4
Purpose
Data clear
Function (Content)
Used to reset the maintenance counter.
Section
Item
Item
Counter
Operation/Procedure Select with 10 digit key pad and press START
key.
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
1
maintenance counter
1
SIMULATION 24-3
SPF COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
SPF COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
SIMULATION 24-3
ORG./STAPLE COUNTER DATA CLEAR.SELEC1-5, AND PRESS START.
1. SPF
2. SCAN
3. STAPLER
4. PUNCH
5. STAMP
ORG./STAPLE COUNTER DATA CLEAR.SELEC1-5, AND PRESS START.
1. SPF
2. SCAN
3. STAPLER
4. PUNCH
5. STAMP
Press [START] key.
Press [CUSTOM SETTING] key
or [START] key.
1
SIMULATION 24-4
MAINTENANCE COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
MAINTENANCE COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
SIMULATION 24-4
MAINTENANCE COUNTER DATA CLEAR.PRESS START.
1. MAINTENANCE
MAINTENANCE COUNTER DATA CLEAR.PRESS START.
1. MAINTENANCE
Press [START] key.
Press [CUSTOM SETTING] key
or [START] key.
') !"#$%&
Click on the first or last page to see other AR-M35 / AR-M450 (serv.man12) service manuals if exist.