Sharp AR-M256 (serv.man18) User Manual / Operation Manual ▷ View online
67
TROUBLESHOOTING AND MAINTENANCE
5
MISFEED IN THE BYPASS TRAY
1
Carefully pull the misfed paper out.
2
Open and close the side cover.
Make sure that the
misfeed message is
cleared.
The message can also
be cleared by opening
and closing the front
cover.
If the message is not
cleared, see "A. Misfeed
in the paper feed area".
misfeed message is
cleared.
The message can also
be cleared by opening
and closing the front
cover.
If the message is not
cleared, see "A. Misfeed
in the paper feed area".
MISFEED IN THE MACHINE
Determine the location of the misfeed and remove it appropriately as indicated below.
A. Misfeed in the paper feed area
1
Open the bypass tray and the side
cover.
cover.
2
Press gently on both sides of the front
cover and pull it open.
cover and pull it open.
3
Carefully remove the misfed paper.
Turn the roller rotating knob in the
direction of the arrow to assist in
removing it.
Turn the roller rotating knob in the
direction of the arrow to assist in
removing it.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
If paper is misfeed here, go to
"A. Misfeed in the paper feed
area" (below).
"A. Misfeed in the paper feed
area" (below).
If paper is misfed, go to
"B. Misfeed in the fusing
area" (p.68).
"B. Misfeed in the fusing
area" (p.68).
The fusing unit is hot. Do not touch
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
Do not touch the photoconductive drum
(green portion) when removing the misfed
paper. Doing so may damage the drum and
cause smudges on copies.
(green portion) when removing the misfed
paper. Doing so may damage the drum and
cause smudges on copies.
Roller rotating knob
Warning
Caution
ar_m318_uk_cpy.book 67 ページ 2007年1月15日 月曜日 午前11時36分
68
TROUBLESHOOTING AND MAINTENANCE
4
Close the front cover and side cover.
Make sure that the
misfeed message is
cleared.
misfeed message is
cleared.
B: Misfeed in the fusing area
1
Open the bypass tray and the side
cover.
cover.
2
Press and pull it open gently on both
sides of the front cover.
sides of the front cover.
3
Turn the roller rotating knob in the
direction of the arrow.
direction of the arrow.
4
Lift the fusing unit release levers and
carefully remove the misfed paper.
carefully remove the misfed paper.
5
If you were unable to remove the
misfeed in step 4, press down on the
fusing unit paper guide knob to open
the paper guide, and carefully remove
the misfed paper.
misfeed in step 4, press down on the
fusing unit paper guide knob to open
the paper guide, and carefully remove
the misfed paper.
6
Close the fusing unit paper guide and
press down on the fusing unit release
levers.
press down on the fusing unit release
levers.
7
Close the front cover and side cover.
Make sure that the
misfeed message is
cleared.
misfeed message is
cleared.
The fusing unit is hot. Do not touch
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
Roller rotating knob
Fusing unit release levers
Warning
• Do not touch the photoconductive drum
(green portion) when removing the misfed
paper. Doing so may damage the drum
and cause smudges on copies.
paper. Doing so may damage the drum
and cause smudges on copies.
• Take care not to let unfixed toner on the
misfed paper soil your hands or clothes.
Caution
ar_m318_uk_cpy.book 68 ページ 2007年1月15日 月曜日 午前11時36分
69
TROUBLESHOOTING AND MAINTENANCE
5
MISFEED IN THE CENTRE TRAY
Remove the paper by pulling it into the centre tray.
MISFEED IN THE UPPER PAPER TRAY
Make sure that there is no misfed paper in the machine before pulling the tray out. (p.67)
1
Lift and pull out the upper paper tray
and then remove the misfed paper.
and then remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
2
Replace the upper paper tray.
Push the upper paper
tray in completely.
tray in completely.
3
Open and close the side cover.
Make sure that the
misfeed message is
cleared.
The message can also
be cleared by opening
and closing the front
cover.
misfeed message is
cleared.
The message can also
be cleared by opening
and closing the front
cover.
ar_m318_uk_cpy.book 69 ページ 2007年1月15日 月曜日 午前11時36分
70
TROUBLESHOOTING AND MAINTENANCE
MISFEED IN THE LOWER PAPER TRAY
● Make sure that there is no misfed paper in the machine before pulling the tray out. (p.67)
● Use the following procedure to remove misfeeds that occur in the 500-sheet paper feed unit or 2 x 500-sheet paper
feed unit.
1
Open the lower side cover.
2
Remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
3
If the misfed paper is not visible in
step 2, lift and pull out the lower paper
tray and remove the misfed paper.
step 2, lift and pull out the lower paper
tray and remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
4
Replace the lower paper tray.
Push the lower paper tray in completely.
5
Close the lower side cover.
Make sure that the
misfeed message is
cleared.
misfeed message is
cleared.
ar_m318_uk_cpy.book 70 ページ 2007年1月15日 月曜日 午前11時36分
Click on the first or last page to see other AR-M256 (serv.man18) service manuals if exist.