Sharp AR-FX13 Service Manual ▷ View online
AR-FX13 SIMULATION 4 - 3
46
13
FAX mode density
adjustment (Normal
text)
adjustment (Normal
text)
[Function]
Scan is started with the exposure adjustment value entered with [START] key, and the stored data of
the selected mode on the FAX side is rewritten into the input value.
Scan is started with the exposure adjustment value entered with [START] key, and the stored data of
the selected mode on the FAX side is rewritten into the input value.
[Operation]
14
FAX mode density
adjustment (Fine text)
adjustment (Fine text)
[Function]
When [START] key is pressed, scan is started with the entered exposure adjustment value and the
data of the selected mode on the FAX side is changed to the entered value.
When [START] key is pressed, scan is started with the entered exposure adjustment value and the
data of the selected mode on the FAX side is changed to the entered value.
For the density adjustment value table data, refer to SIM46-13 (FAX mode density adjustment (Nor-
mal text).)
mal text).)
[Operation]
15
FAX mode density
adjustment (Super
fine)
adjustment (Super
fine)
[Function]
When [START] key is pressed, scan is started with the entered exposure adjustment value and the
data of the selected mode on the FAX side is changed to the entered value.
When [START] key is pressed, scan is started with the entered exposure adjustment value and the
data of the selected mode on the FAX side is changed to the entered value.
For the density adjustment value table data, refer to SIM46-13 (FAX mode density adjustment (Nor-
mal text).)
mal text).)
[Operation]
Main
code
code
Sub
code
Contents
Details of function/operation
Density adjustment value data table
When initializing each data: 50
Mode
Photo
Exposure adjustment value
STD (Normal text)
off
Fine (Fine text)
on
off
Sfine (Super fine)
on
off
1) Initial display
("XX" is the corresponding exposure adjustment
value of normal text mode stored on the FAX
side.)
value of normal text mode stored on the FAX
side.)
2) Enter a 2-digit value as the exposure adjust-
ment value with [Numeric] key.
("YY" is the entered exposure adjustment
value.)
value.)
3) Press [START] key.
Scan is started (self print), and the LED of
[START] key is turned off.
[START] key is turned off.
4) Print is started (self print).
After completion of printing, returns to “2)”
display.
display.
ADJUST EXP. STD
XX
ADJUST EXP. STD
YY
ADJUST EXP. STD
SCAN YY
ADJUST EXP. STD
PRINT YY
1) Initial display
("XX" is the corresponding exposure adjustment
value of the fine text mode stored on the FAX
side.)
value of the fine text mode stored on the FAX
side.)
2) Enter a 2-digit value as the exposure adjust-
ment value with [Numeric] key.
("YY" is the entered exposure adjustment
value.)
value.)
3) Press [START] key.
Scan start (self print)
4) Print start (self print)
After completion of printing, returns to “2)”
display.
display.
ADJUST EXP. FINE
XX
ADJUST EXP. FINE
YY
ADJUST EXP. FINE
SCAN YY
ADJUST EXP. AUTO
PRINT YY
1) Initial display
("XX" is the corresponding exposure adjustment
value of the super fine mode stored on the FAX
side.)
value of the super fine mode stored on the FAX
side.)
2) Enter a 2-digit value as the exposure adjust-
ment value with [Numeric] key.
("YY" is the entered exposure adjustment
value.)
value.)
3) Press [START] key.
Scan start (self print)
4) Print start (self print)
After completion of printing, returns to “2)”
display.
display.
ADJUST EXP. S-FINE
XX
ADJUST EXP. S-FINE
YY
ADJUST EXP. S-FINE
SCAN YY
ADJUST EXP. S-FINE
PRINT YY
AR-FX13 SIMULATION 4 - 4
46
39
FAX mode sharpness
adjustment
adjustment
[Function]
When [START] key is pressed, scan is started with the entered sharpness adjustment value, and the
data of the selected mode stored on the FAX side is changed to the entered value.
When [START] key is pressed, scan is started with the entered sharpness adjustment value, and the
data of the selected mode stored on the FAX side is changed to the entered value.
[Operation]
66
01
FAX soft SW setting
[Function]
Use to check the FAX soft SW setting.
Every time when the key is pressed, the bit on the first line is switched 0 and 1.
Use to check the FAX soft SW setting.
Every time when the key is pressed, the bit on the first line is switched 0 and 1.
[Operation]
02
FAX soft SW
initializing (excluding
the adjustment values)
initializing (excluding
the adjustment values)
[Function]
Use to initializing FAX soft SW.
Use to initializing FAX soft SW.
[Operation]
Main
code
code
Sub
code
Contents
Details of function/operation
Sharpness adjustment value data table
When initializing each data: 1
Mode
Sharpness adjustment value
1: STD
2: FINE
3: S-FINE
4: FINE/PHOTO
5: S-FINE/PHOTO
1) Initial display
2) [
] [
] key or after 2sec
Every time when [
] key is pressed, the
second line is changed in the sequence of
No. 1
No. 1
→ 2 → 3 → 4 → 5 → 1.
When [
] key is pressed, the sequence is
reversed.
3) Select the arrow key 1-5, and the LED of
[START] key is lighted.
("ZZZZ" is the mode selected among STD,
FINE, S-FINE, FINE/PHOTO, and S-FINE/
PHOTO.)
FINE, S-FINE, FINE/PHOTO, and S-FINE/
PHOTO.)
("X" is the corresponding sharpness adjustment
value of the selected mode stored on the FAX
side.)
∗ [Clear] key: Returns to “2)” display.
value of the selected mode stored on the FAX
side.)
∗ [Clear] key: Returns to “2)” display.
4) Enter a one-digit value (0-2) as the sharp-
ness adjustment value with [Numeric] key.
("Y" is the entered sharpness adjustment value.)
∗ [Clear] key: Returns to “2)” display.
∗ [Clear] key: Returns to “2)” display.
5) Press [START] key.
Scan start (self print)
6) Print start (self print)
After completion of printing, returns to “4)”
display.
display.
SHARPNESS SETTING
PRESS
←
,
→
SHARPNESS SET (1-5)
1:STD
SHARPNESS SETTING
ZZZZ(0-2) X
SHARPNESS SETTING
ZZZZ(0-2) Y
SHARPNESS SETTING
SCAN Y
SHARPNESS SETTING
PRINT Y
1) Initial display
∗ [Clear] key: Returns to the main-sub code
input display.
2) Enter a 3-digit value of soft SW No. (To
enter the fourth digit, shift to the left.), and
the press [ENTER]/[OK] key.
the press [ENTER]/[OK] key.
"xxxxxxxx" is the set content.
∗ Select 2: Returns to the soft SW No. entry dis-
∗ Select 2: Returns to the soft SW No. entry dis-
play.
3) Select 1
4) Change with 1-8 of [Numeric] key and the
press [ENTER]/[OK] key.
"xxxxxxxx" is the set content.
∗ Select 2: Returns to the soft SW No. entry dis-
∗ Select 2: Returns to the soft SW No. entry dis-
play.
5) Select 1
After 2sec, returns to "1) Initial display".
ENTER FAX SOFT SW. #
(3 DIGITS) SW.___
No.### xxxxxxxx
CHANGE? 1:YES 2:NO
No.### xxxxxxxx
USE # KEY 12345678
No.### xxxxxxxx
STORED? 1:YES 2:NO
STORED
1) Initial display
After 2sec, main code and sub code input display.
INITIALIZED
AR-FX13 SIMULATION 4 - 5
66
03
FAX PWB memory
check
check
[Function]
Use to check the FAX PWB memory.
Use to check the FAX PWB memory.
[Operation]
04
Signal send mode
(Max. value)
(Max. value)
[Function]
Use to set the signal send mode (Max. value).
Use to set the signal send mode (Max. value).
Facsimile simulation design specifications.
[Operation]
Main
code
code
Sub
code
Contents
Details of function/operation
1) Initial display
2) [
] [
] key or after 2sec
Every time when [
] key is pressed, the second line is changed in the sequence of No. 1
→ 2 →
3
→ 1.
When [
] key is pressed, the sequence is reversed.
∗ [Clear] key: Returns to the main-sub code input display.
3) [ENTER]/[OK] key
4) After completion of check
• When the result is OK
• In case of sum check error
• In case of address bus check
error
• In case of data check error
• In case of data bus check
error
• In case of erase check error
∗ [Clear] key: Returns to "1) Initial display".
SELECT CHECK MEMORY
PRESS
←
,
→
SELECT MEMORY (1-3)
1:DRAM
SELECT MEMORY (1-3)
2:SRAM
SELECT MEMORY (1-3)
3:FLASH
CHECKING MEMORY
MEMORY CHECK RESULT
OK
MEMORY CHECK RESULT
XXXXXXXX SUM NG
MEMORY CHECK RESULT
XXXXXXXX A-BUS NG
MEMORY CHECK RESULT
XXXXXXXX DATA NG
MEMORY CHECK RESULT
XXXXXXXX D-BUS NG
MEMORY CHECK RESULT
XXXXXXXX ERASE NG
1
NO SIGNAL
13
7200bps(V34)
25
2400bps(V27ter)
2
33600bps(V34)
14
4800bps(V34)
26
300bps(FLAG)
3
31200bps(V34)
15
2400bps(V34)
27
2100Hz(CED)
4
28800bps(V34)
16
14400bps(V33)
28
1100Hz(CNG)
5
26400bps(V34)
17
12000bps(V33)
29
300bps(V21)
6
24000bps(V34)
18
14400bps(V17)
30
2100Hz(ANSam)
7
21600bps(V34)
19
12000bps(V17)
31
DUMMY RING
8
19200bps(V34)
20
9600bps(V17)
32
NO VOICE ANSWER
9
16800bps(V34)
21
7200bps(V17)
33
NO RING BACK TONE
10
14400bps(V34)
22
9600bps(V29)
34
LINE OFF HOOK
11
12000bps(V34)
23
7200bps(V29)
35
LINE ON HOOK
12
9600bps(V34)
24
4800bps(V27ter)
1) Initial display
2) 2-digit (1-35) with [Numeric] key / [
] [
] key / 2sec after
Pressing [
] key or [
] key reverses the sequence.
∗ [Clear] key: Returns to the main-sub code input display.
3) [ENTER]/[OK] key
Send after setting
∗ [Clear] key: Returns to "1) Initial display".
SELECT OUTPUT SIGNAL
(2 DIGITS) No.___
No. (1-35)
1:NO SIGNAL
.....
No. (1-35)
35:LINE ON HOOK
OUTPUTING SIGNAL MAX
PRESS CLEAR TO STOP
AR-FX13 SIMULATION 4 - 6
66
05
Signal send mode
(Soft SW set value)
(Soft SW set value)
[Function]
Use to set the signal send mode (Soft SW set value).
Use to set the signal send mode (Soft SW set value).
Facsimile simulation design specifications.
[Operation]
07
Image memory
content print
content print
[Function]
Use to print the image memory content.
Use to print the image memory content.
[Operation]
10
Image memory
content clear
content clear
[Function]
Use to clear the image memory content.
Use to clear the image memory content.
[Operation]
Main
code
code
Sub
code
Contents
Details of function/operation
1
NO SIGNAL
13
7200bps(V34)
25
2400bps(V27ter)
2
33600bps(V34)
14
4800bps(V34)
26
300bps(FLAG)
3
31200bps(V34)
15
2400bps(V34)
27
2100Hz(CED)
4
28800bps(V34)
16
14400bps(V33)
28
1100Hz(CNG)
5
26400bps(V34)
17
12000bps(V33)
29
300bps(V21)
6
24000bps(V34)
18
14400bps(V17)
30
2100Hz(ANSam)
7
21600bps(V34)
19
12000bps(V17)
31
DUMMY RING
8
19200bps(V34)
20
9600bps(V17)
32
NO VOICE ANSWER
9
16800bps(V34)
21
7200bps(V17)
33
NO RING BACK TONE
10
14400bps(V34)
22
9600bps(V29)
34
LINE OFF HOOK
11
12000bps(V34)
23
7200bps(V29)
35
LINE ON HOOK
12
9600bps(V34)
24
4800bps(V27ter)
1) Initial display
2) 2-digit (1-35) with [Numeric] key / [
] [
] key / 2sec after
Pressing [
] key or [
] key reverses the sequence.
∗ [Clear] key: Returns to the main-sub code input display.
3) [ENTER]/[OK] key: Send after setting
3) [ENTER]/[OK] key: Send after setting
∗ [Clear] key: Returns to "1) Initial display".
SELECT OUTPUT SIGNAL
(2 DIGITS) No.___
No. (1-35)
1:NO SIGNAL
.....
No. (1-35)
35:LINE ON HOOK
OUTPUTING SIGNAL SSW
PRESS CLEAR TO STOP
• When print is allowed
After completion of printing,
main code and sub code input
display.
main code and sub code input
display.
• When there is no print data
After 2 sec, FAX control is
terminated.
terminated.
• When print is inhibited
After 2 sec, main code and sub
code input display.
code input display.
PRINT STORED
NO DATA
CAN NOT PRINT
• When there are some print data
After completion of memory clear, the buzzer
sounds.
sounds.
Remains unchanged until the power is turned
off.
off.
• When there are no print data
After completion of memory clear
After 2sec, main code and sub code input dis-
play.
play.
CLEAR IMAGE MEMORY
CLEARED
PLEASE POWER OFF
CLEAR IMAGE MEMORY
CLEARED
Click on the first or last page to see other AR-FX13 service manuals if exist.