Sharp AR-FX12 (serv.man7) Service Manual ▷ View online
AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-9
<List of set values 1>
<List of display values 1>
<List of set values 2>
<List of set values 3>
46-15
Purpose
Adjustment
Function (Content)
Used to adjust the reading density in the FAX
mode (Super Fine mode).
(Only when FAX is installed.)
mode (Super Fine mode).
(Only when FAX is installed.)
Section
Item
Item
Picture quality
Operation/Procedure The exposure mode to be set is selected.
(FAX Super Fine mode individual adjustment)
1) The current set value is highlighted on the
right side of each item. In this screen, be sure
to select "1: PRINT START." (Set value: 1)
to select "1: PRINT START." (Set value: 1)
2) Set the exposure level with 10 digit key pad.
Press P to store the set value.
(Default: 50, set range: 0 - 99)
(Default: 50, set range: 0 - 99)
3) Press START, and copying is started and the
set value is stored. (Display value 1)
4) Select a paper feed tray. (Set value 2)
5) Select an exposure level. (Set value 3)
5) Select an exposure level. (Set value 3)
SIMULATION 46-15
EXP. LEVEL SETUP FAX(SUPER FINE). SELECT 0-14, AND PRESS START.
0. TRAY SELECT 1. PRINT START
2. EXP LEVEL
3. AUTO
EXP. LEVEL SETUP FAX(SUPER FINE). SELECT 0-14, AND PRESS START.
0. TRAY SELECT 1. PRINT START
2. EXP LEVEL
3. AUTO
4. 1.0
5. 2.0
6. 3.0
7. 4.0
8. 5.0
9. AUTO(H) 10. 1.0(H)
11. 2.0(H)
12. 3.0(H)
13. 4.0(H)
14. 5.0(H)
1
SIMULATION 46-15
EXP. LEVEL SETUP FAX(SUPER FINE),INPUT VALUE 0-99, AND PRESS
START.
3. AUTO
EXP. LEVEL SETUP FAX(SUPER FINE),INPUT VALUE 0-99, AND PRESS
START.
3. AUTO
50
SIMULATION 46-15
EXP. LEVEL SETUP FAX(SUPER FINE). SELECT 1-5, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4
5. BPT
EXP. LEVEL SETUP FAX(SUPER FINE). SELECT 1-5, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4
5. BPT
1
SIMULATION 46-15
EXP. LEVEL SETUP FAX(SUPER FINE). NOW PRINTING.
EXP. LEVEL SETUP FAX(SUPER FINE). NOW PRINTING.
SIMULATION 46-15
EXP. LEVEL SETUP FAX(SUPER FINE). SELECT 3-14, AND PRESS START.
(EXP. LEVEL SELECT)
3. AUTO
EXP. LEVEL SETUP FAX(SUPER FINE). SELECT 3-14, AND PRESS START.
(EXP. LEVEL SELECT)
3. AUTO
4. 1.0
5. 2.0
6. 3.0
7. 4.0
8. 5.0
9. AUTO(H) 10. 1.0(H)
11. 2.0(H)
12. 3.0(H)
13. 4.0(H)
14. 5.0(H)
1
50
50
1
1
50
50
50
50
50
50
50
50
50
50
Press [CUSTOM SETTINGS] key.
Select other than 0 - 2,
and press [START] key.
and press [START] key.
Select 1, and
press [START] key.
press [START] key.
Select 2, and
press [START] key.
press [START] key.
Select 0, and
press [START] key.
press [START] key.
Press [START] key.
Press [START] key or
press [CUSTOME SETTINGS] key.
Press [START] key or
press [CUSTOME SETTINGS] key.
Press [CUSTOM SETTINGS] key.
Or copying is terminated.
Or copying is terminated.
0
Paper feed tray selection
1
Print start (Default)
2
Exposure level selection
3
Auto
4
Exposure level 1
5
Exposure level 2
6
Exposure level 3
7
Exposure level 4
8
Exposure level 5
<Half tone>
9
Auto
10
Exposure level 1
11
Exposure level 2
12
Exposure level 3
13
Exposure level 4
14
Exposure level 5
Normal display
“NOW PRINTING”
ERROR display
DOOR OPEN.
JAM
PAPER EMPTY.
JAM
PAPER EMPTY.
1
TRAY1
2
TRAY2
3
TRAY3
4
TRAY4
5
Manual feed
3
Auto
4
Exposure level 1
5
Exposure level 2
6
Exposure level 3
7
Exposure level 4
8
Exposure level 5
<Half tone>
9
Auto
10
Exposure level 1
11
Exposure level 2
12
Exposure level 3
13
Exposure level 4
14
Exposure level 5
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 9 ページ ２００４年１２月１５日 水曜日 午後２時２１分
AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-10
<List of set values 1>
<List of display values 1>
<List of set values 2>
<List of set values 3>
46-16
Purpose
Adjustment
Function (Content)
Used to adjust the reading density in the FAX
mode (Ultra Fine mode). (Only when FAX is
installed.)
mode (Ultra Fine mode). (Only when FAX is
installed.)
Section
Item
Item
Picture quality
Operation/Procedure The exposure mode to be set is selected.
(FAX Ultra Fine mode individual adjustment)
1) The current set value is highlighted on the
right side of each item. In this screen, be sure
to select "1: PRINT START." (Set value: 1)
to select "1: PRINT START." (Set value: 1)
2) Set the exposure level with 10 digit key pad.
Press P to store the set value.
(Default: 50, set range: 0 - 99)
(Default: 50, set range: 0 - 99)
3) Press START, and copying is started and the
set value is stored. (Display value 1)
4) Select a paper feed tray. (Set value 2)
5) Select an exposure level. (Set value 3)
5) Select an exposure level. (Set value 3)
SIMULATION 46-16
EXP. LEVEL SETUP FAX(ULTRA FINE). SELECT 0-14, AND PRESS START.
0. TRAY SELECT 1. PRINT START
2. EXP LEVEL
3. AUTO
EXP. LEVEL SETUP FAX(ULTRA FINE). SELECT 0-14, AND PRESS START.
0. TRAY SELECT 1. PRINT START
2. EXP LEVEL
3. AUTO
4. 1.0
5. 2.0
6. 3.0
7. 4.0
8. 5.0
9. AUTO(H) 10. 1.0(H)
11. 2.0(H)
12. 3.0(H)
13. 4.0(H)
14. 5.0(H)
1
SIMULATION 46-16
EXP. LEVEL SETUP FAX(ULTRA FINE),INPUT VALUE 0-99, AND PRESS
START.
3. AUTO
EXP. LEVEL SETUP FAX(ULTRA FINE),INPUT VALUE 0-99, AND PRESS
START.
3. AUTO
50
SIMULATION 46-16
EXP. LEVEL SETUP FAX(ULTRA FINE). SELECT 1-5, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4
5. BPT
EXP. LEVEL SETUP FAX(ULTRA FINE). SELECT 1-5, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4
5. BPT
1
SIMULATION 46-16
EXP. LEVEL SETUP FAX(ULTRA FINE). NOW PRINTING.
EXP. LEVEL SETUP FAX(ULTRA FINE). NOW PRINTING.
SIMULATION 46-16
EXP. LEVEL SETUP FAX(ULTRA FINE). SELECT 3-14, AND PRESS START.
(EXP. LEVEL SELECT)
3. AUTO
EXP. LEVEL SETUP FAX(ULTRA FINE). SELECT 3-14, AND PRESS START.
(EXP. LEVEL SELECT)
3. AUTO
4. 1.0
5. 2.0
6. 3.0
7. 4.0
8. 5.0
9. AUTO(H) 10. 1.0(H)
11. 2.0(H)
12. 3.0(H)
13. 4.0(H)
14. 5.0(H)
1
50
50
1
1
50
50
50
50
50
50
50
50
50
50
Press [CUSTOM SETTINGS] key.
Select other than 0 - 2,
and press [START] key.
and press [START] key.
Select 1, and
press [START] key.
press [START] key.
Select 2, and
press [START] key.
press [START] key.
Select 0, and
press [START] key.
press [START] key.
Press [START] key.
Press [START] key or
press [CUSTOME SETTINGS] key.
Press [START] key or
press [CUSTOME SETTINGS] key.
Press [CUSTOM SETTINGS] key.
Or copying is terminated.
Or copying is terminated.
0
Paper feed tray selection
1
Print start (Default)
2
Exposure level selection
3
Auto
4
Exposure level 1
5
Exposure level 2
6
Exposure level 3
7
Exposure level 4
8
Exposure level 5
<Half tone>
9
Auto
10
Exposure level 1
11
Exposure level 2
12
Exposure level 3
13
Exposure level 4
14
Exposure level 5
Normal display
“NOW PRINTING”
ERROR display
DOOR OPEN.
JAM
PAPER EMPTY.
JAM
PAPER EMPTY.
1
TRAY1
2
TRAY2
3
TRAY3
4
TRAY4
5
Manual feed
3
Auto
4
Exposure level 1
5
Exposure level 2
6
Exposure level 3
7
Exposure level 4
8
Exposure level 5
<Half tone>
9
Auto
10
Exposure level 1
11
Exposure level 2
12
Exposure level 3
13
Exposure level 4
14
Exposure level 5
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 10 ページ ２００４年１２月１５日 水曜日 午後２時２１分
AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-11
<List of display values>
* : When the Flash ROM, HDD and the OP.Flash ROM are not installed,
transfer is not executed.
<List of set values>
*
SIM 1 cannot be changed with this simulation.
Main code 56
56-1
Purpose
Function (Content)
Function (Content)
Data transfer
Section
Item
Operation/Procedure Used to perform data transfer. Select an item
Item
Operation/Procedure Used to perform data transfer. Select an item
with 10 digit key pad and press START key.
The following operation is performed and the
display returns to the original state.
1. Data transfer executed
2. Data transfer not executed
The following operation is performed and the
display returns to the original state.
1. Data transfer executed
2. Data transfer not executed
1*
All memory contents are transferred to HDD.
(Same operation as 3.5.)
(Same operation as 3.5.)
2*
The contents of HDD are transferred to all memory.
(Same operation as 4.6.)
(Same operation as 4.6.)
3
Transfer from EEPROM to HDD
4
Transfer from HDD to EEPROM
5*
Transfer from SRAM to HDD.If, however, a FAX memory or an
option memory (for FAX) is installed, the contents of the FAX
memory are also transferred to HDD.
option memory (for FAX) is installed, the contents of the FAX
memory are also transferred to HDD.
6*
Transfer from HDD to SRAM. If, however, a FAX memory or an
option memory (for FAX) is installed, the contents of the FAX
memory are also transferred as well as the contents of HDD.
option memory (for FAX) is installed, the contents of the FAX
memory are also transferred as well as the contents of HDD.
7
Transfer from Font Rom to HDD>
SIMULATION 56-1
DATA COPY. SELECT 1 - 7, AND PRESS START.
1.ALL(EEPROM,SRAM,FlashROM) HDD
2.HDD ALL(EEPROM,SRAM,FlashROM)
3.EEPROM HDD
4.HDD EEPROM
5.SRAM(+FAX Memory, +Option Memory) HDD
6.HDD SRAM(+FAX Memory, +Option Memory)
7.FontROM HDD
DATA COPY. SELECT 1 - 7, AND PRESS START.
1.ALL(EEPROM,SRAM,FlashROM) HDD
2.HDD ALL(EEPROM,SRAM,FlashROM)
3.EEPROM HDD
4.HDD EEPROM
5.SRAM(+FAX Memory, +Option Memory) HDD
6.HDD SRAM(+FAX Memory, +Option Memory)
7.FontROM HDD
SIMULATION 56-1
EEPROM HDD DATA COPY.
ARE YOU SURE?
1. YES
2. NO
EEPROM HDD DATA COPY.
ARE YOU SURE?
1. YES
2. NO
1
1
press [START] key
Press [CUSTOM SETTINGS] key
or [START] key
Main code 61
61-3
Purpose
Adjustment
Function (Content)
Used to adjust the scanner (exposure) laser
power (absolute value) in the FAX reception
mode. (Only when FAX is installed.)
power (absolute value) in the FAX reception
mode. (Only when FAX is installed.)
Section
PCU
Item
Operation
Operation/Procedure Set the laser power in FAX operation.
Enter the set value and press START to store it.
Set range: 1 ~ 165
Default : (45PPM) 104
(35PPM) 88
Set range: 1 ~ 165
Default : (45PPM) 104
(35PPM) 88
Initial value
Set range
1
FAX reception
45PPM
104
1 ~ 165
35PPM
88
Main code 66
66-1
Purpose
Setup
Function (Content)
Used to set the FAX soft switch function.
(Used to utilize the FAX soft switch function.)
(Used to utilize the FAX soft switch function.)
Section
FAX
Item
Operation/Procedure Set the Fax soft switch.
Operation/Procedure Set the Fax soft switch.
(For details of the soft SW, refer to the AR-FX12
Specifications.)
SW1 cannot be changed with this simulation.
Entry of 1 - 8 only is effective.
Specifications.)
SW1 cannot be changed with this simulation.
Entry of 1 - 8 only is effective.
1) Specify the bit to be changed (highlighted)
with a number.
2) Press START to rewrite the setting.
SIMULATION 61-3
LASER POWER SETTING (FAX). PRESS START.
1. FAX
LASER POWER SETTING (FAX). PRESS START.
1. FAX
1
5
SIMULATION 61-3
LASER POWER SETTING (FAX). INPUT VALUE 67-150, AND PRESS START.
1. FAX
LASER POWER SETTING (FAX). INPUT VALUE 67-150, AND PRESS START.
1. FAX
5
Press [START] key.
Press [CUSTOM SETTINGS] key
or [START] key.
or [START] key.
1
SIMULATION 66-1
FAX SOFT SW. SETTING. INPUT DATA No(1-8), AND PRESS START.
SOFT SW-2:
FAX SOFT SW. SETTING. INPUT DATA No(1-8), AND PRESS START.
SOFT SW-2:
00001001
SIMULATION 66-1
FAX SOFT SW. SETTING. SELECT 2 - 120, AND PRESS START.
FAX SOFT SW. SETTING. SELECT 2 - 120, AND PRESS START.
1 2 3 4 5 6 7 8
Press [START] key.
Press [CUSTOM SETTINGS] key
or [START] key.
or [START] key.
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 11 ページ ２００４年１２月１５日 水曜日 午後２時２１分
AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-12
<Country codes>
*
Conforms to Advisory Document T.35.
<List of display values>
<Items>
66-2
Purpose
Data clear
Function (Content)
Used to set the FAX soft switch setup to the
default. (Except for the adjustment values)
default. (Except for the adjustment values)
Section
FAX
Item
Data
Operation/Procedure The current set value of SW1 is displayed.
Entry of 1 ~ 8 is effective.
1) Specify the bit to be changed (highlighted)
with a number.
2) Select the country code, and press START to
rewrite the setting.
For the country code, refer to the table below.
An entry other than the specified codes is
accepted as Japan.
* Conforms to Recommendations T.35.
For the country code, refer to the table below.
An entry other than the specified codes is
accepted as Japan.
* Conforms to Recommendations T.35.
3) Select a number with 10 digit key pad and
press START key to execute.
4) The soft switch (excluding the FAX adjustment
value) corresponding to the selected country
code is cleared.
code is cleared.
1: FAX soft SW clear
2: Not clear
2: Not clear
5) The selected country is highlighted.
U.K.
1
0
1
1
0
1
0
0
France
0
0
1
1
1
1
0
1
German
0
0
0
0
0
1
0
0
Sweden
1
0
1
0
0
1
0
1
New Zealand
0
1
1
1
1
1
1
0
Australia
0
0
0
0
1
0
0
1
China
0
0
1
0
0
1
1
0
Singapore
1
0
0
1
1
1
0
0
Indonesia
0
1
0
1
0
1
0
0
Thailand
1
0
1
0
1
0
0
1
Malaysia
0
1
1
0
1
1
0
0
India
0
1
0
1
0
0
1
1
Taiwan
1
1
1
1
1
1
1
0
1
JAPAN
SIMULATION 66-2
FAX SOFT SW. CLEAR.
ARE YOU SURE?
FAX SOFT SW. CLEAR.
ARE YOU SURE?
1:YES
2:NO
2:NO
00000000
SIMULATION 66-2
FAX SOFT SW.CLEAR (WIHTOUT ADJUSTMENT VALUE).
INPUT COUNTRY CODE, AND PRESS START.
FAX SOFT SW.CLEAR (WIHTOUT ADJUSTMENT VALUE).
INPUT COUNTRY CODE, AND PRESS START.
1 2 3 4 5 6 7 8
Press [START] key.
66-3
Purpose
Operation test, check
Function (Content)
Used to check the operations of FAX PWB
memory (read/write).
(This adjustment is required when replacing the
PWB with a new one.)
memory (read/write).
(This adjustment is required when replacing the
PWB with a new one.)
Section
FAX
Item
Data
Operation/Procedure Select an item and press START key to execute.
The display goes to the next menu.
When "1. All Memory Device Check" is selected,
all memory devices are checked only once.
The error occurring address or the data line is
displayed for each item.
When an item with "repeat" is selected, the
result is displayed as "NG" or execution is
continued until [CUSTOM SETTINGS]) or ([CA]
key) is pressed.
When "1. All Memory Device Check" is selected,
all memory devices are checked only once.
The error occurring address or the data line is
displayed for each item.
When an item with "repeat" is selected, the
result is displayed as "NG" or execution is
continued until [CUSTOM SETTINGS]) or ([CA]
key) is pressed.
NO CHECK
Not checked
CHECKING
Checking
OK
Check complete OK
NG
Check error
MFP SRAM (MFP control PWB)
SRAM
MFP FLASH (FAX I/F PWB)
FLASH Memory
MFP OP.FLASH (FAX I/F PWB)
FLASH Memory (AR-MM9)
MODEM EEPROM (FAX PWB)
MODEM SRAM(G/A) (FAX PWB)
MODEM SDRAM1 (FAX PWB)
MODEM SDRAM 2(FAX PWB)
MODEM SRAM(G/A) (FAX PWB)
MODEM SDRAM1 (FAX PWB)
MODEM SDRAM 2(FAX PWB)
SIMULATION 66-3
FAX PWB MEMORY CHECK.
MFP SRAM: CHECKING
MFP FLASH: NO CHECK
NO CHECK
MODEM EEPROM: NG:A0010000
MODEM SDRAM2(G/A):NO CHECK
MODEM CASRAM: NG A11
MODEM SDRAM1: OK
FAX PWB MEMORY CHECK.
MFP SRAM: CHECKING
MFP FLASH: NO CHECK
NO CHECK
MODEM EEPROM: NG:A0010000
MODEM SDRAM2(G/A):NO CHECK
MODEM CASRAM: NG A11
MODEM SDRAM1: OK
SIMULATION 66-3
FAX PWB MEMORY CHECK. INPUT 1-13, AND PRESS START.
1. All Memory Device Check (once)
2. MFP SRAM (once) 3. MFP SRAM (repeat)
4. MFP FLASH + OP FLASH (once)
5. MFP FLASH + OP FLASH (repeat)
6. MODEM EEPROM (once) 7. MODEM EEPROM (repeat)
8. MODEM SRAM(G/A) (once) 9. MODEM SRAM(G/A) (repeat)
10. MODEM SDRAM1 (once) 11. MODEM SDRAM1 (repeat)
12. MODEM SDRAM2 (once) 13. MODEM SDRAM2 (repeat)
FAX PWB MEMORY CHECK. INPUT 1-13, AND PRESS START.
1. All Memory Device Check (once)
2. MFP SRAM (once) 3. MFP SRAM (repeat)
4. MFP FLASH + OP FLASH (once)
5. MFP FLASH + OP FLASH (repeat)
6. MODEM EEPROM (once) 7. MODEM EEPROM (repeat)
8. MODEM SRAM(G/A) (once) 9. MODEM SRAM(G/A) (repeat)
10. MODEM SDRAM1 (once) 11. MODEM SDRAM1 (repeat)
12. MODEM SDRAM2 (once) 13. MODEM SDRAM2 (repeat)
1
1
Press [START] key.
When check is "repeat" and
[CUSTOM SETTINGS] key is pressed.
[CUSTOM SETTINGS] key is pressed.
Press [CUSTOM SETTINGS] key.
The selected number is displayed.
When Check is "once," the display stops at the report display.
When [CUSTM SETTING] key pressed, the display returns to
the selection menu of 1 ~ 13.
When [CUSTM SETTING] key pressed, the display returns to
the selection menu of 1 ~ 13.
In repeat, the number of repeat is displayed in
a four-digit decimal number as "CHECKING 0001."
When 9999 is exceeded, the number returns to 0000.
(A space is placed between CHECKING and the number.)
a four-digit decimal number as "CHECKING 0001."
When 9999 is exceeded, the number returns to 0000.
(A space is placed between CHECKING and the number.)
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 12 ページ ２００４年１２月１５日 水曜日 午後２時２１分
Click on the first or last page to see other AR-FX12 (serv.man7) service manuals if exist.