Sharp AR-C262M (serv.man3) Service Manual ▷ View online
AR-C262M EXTERNAL VIEW AND INTERNAL STRUCTURE 6 - 4
D. Job status screen (common to print, copy, network scan and fax)
This screen is displayed when the [JOB STATUS] key on the operation panel is pressed.
A job list showing the current job at the top of the job queue or a list showing completed jobs can be displayed.
The contents of jobs can be viewed or jobs can be deleted from the queue. (The screen below is an example and differs from actual
screens.)
screens.)
No.
Display of inside of touch panel
Note
Name
Function
1
Job list
This shows the current job and the jobs waiting to be run. The
icons to the left of the jobs in the queue show the job mode.
icons to the left of the jobs in the queue show the job mode.
Copy mode
Printer mode
Network scanner mode
Fax send job
Fax reception job
The displayed jobs in the job list are themselves operation keys.
To cancel printing or to give a job the highest print priority, touch
the relevant job key to select the job and execute the desired
operation using the keys described in 5 and 6.
To cancel printing or to give a job the highest print priority, touch
the relevant job key to select the job and execute the desired
operation using the keys described in 5 and 6.
∗
“PAPER EMPTY” in the job status
display
When a job status display indicates
“PAPER EMPTY”, the specified paper
size for the job is not loaded in any of
the trays.
When the [DETAIL] key appears, the
key of a job in the job queue can be
touched followed by the [DETAIL] key
to change the paper size selection to
a different paper size (only in printer
mode).
display
When a job status display indicates
“PAPER EMPTY”, the specified paper
size for the job is not loaded in any of
the trays.
When the [DETAIL] key appears, the
key of a job in the job queue can be
touched followed by the [DETAIL] key
to change the paper size selection to
a different paper size (only in printer
mode).
2
Mode select key
This only appears in the job status screen of fax mode. The key
is used to switch the job list display between “JOB QUEUE” and
“COMPLETE”.
“JOB QUEUE”: Shows stored jobs and the job in progress.
“COMPLETE”: Shows finished jobs.
is used to switch the job list display between “JOB QUEUE” and
“COMPLETE”.
“JOB QUEUE”: Shows stored jobs and the job in progress.
“COMPLETE”: Shows finished jobs.
3
[PRINT JOB] key
Use to display the print job list for printer, copy and fax mode.
4
[SCANNER JOB] key
This displays a list of jobs that only used the network scanner
function.
function.
5
[FAX JOB] key
This displays the transmission/reception status and finished jobs
of fax mode when the fax option is installed.
of fax mode when the fax option is installed.
6
Display switching keys
Use to switch the page of the displayed job list.
7
[STOP/DELETE] key
Use to cancel or delete the current job or delete the selected
reserved job. Note that a fax print job cannot be canceled or
deleted.
reserved job. Note that a fax print job cannot be canceled or
deleted.
8
[PRIORITY] key
This only appears in the job status screen of fax mode. Touch
this key to give priority to a job that has been selected in the job
queue.
this key to give priority to a job that has been selected in the job
queue.
9
[DETAIL] key
The key is only effective for computer print jobs and only
appears in the job status screen of the printer mode. It is used to
display detailed information of a selected print job and to change
the paper size for the print job.
appears in the job status screen of the printer mode. It is used to
display detailed information of a selected print job and to change
the paper size for the print job.
1
3
4
5
6
8
9
7
2
JOB QUEUE
COPY
Suzuki
066211221
STATUS
PAPER EMPTY
*
003 / 000
PRINT JOB
SCANNER JOB
FAX JOB
JOB QUEUE
COMPLETE
DETAIL
PRIORITY
STOP/DELETE
WAITING
WAITING
003 / 000
001 / 000
1/1
SETS / PROGRESS
AR-C262M EXTERNAL VIEW AND INTERNAL STRUCTURE 6 - 5
E. Cross section
No.
Parts
Note
Name
Function
1
No. 3 mirror
Leads a document image to the CCD.
2
No. 2 mirror
Leads a document image to No. 3 mirror.
3
No. 1 mirror
Leads a document image to No. 2 mirror.
4
Scanner lamp
Radiates light on a document for the CCD to scan the document image.
5
Yellow toner cartridge
Attaches yellow toner to electrostatic latent images on the photoconductor.
6
Magenta toner cartridge
Attaches magenta toner to electrostatic latent images on the photoconductor.
7
Cyan toner cartridge
Attaches cyan toner to electrostatic latent images on the photoconductor.
8
Black toner cartridge
Attaches black toner to electrostatic latent images on the photoconductor.
9
Discharge lamp
Discharges the photoconductor.
10
Main charger unit
Charges the magenta photoconductor negatively.
11
LED unit
Converts the color component image signal sent from the ICU PWB into LED
light, and radiate it to the OPC drum.
light, and radiate it to the OPC drum.
12
Doctor blade
Regulates the toner quantity on the developing roller.
13
Supply roller
Supplies toner to the developing roller.
14
Developing roller
Attaches toner to the photoconductor.
15
Cleaning blade
Cleans residual toner from the photoconductor.
16
OPC drum unit
Forms electro-static latent images.
17
CCD lens
Reduces document images (light) and projects it to the CCD.
18
CCD PWB
Reads document images (photo signals) and converts them into electrical
signals.
signals.
19
Transfer roller (K)
Applies the transfer voltage to the transfer belt.
20
Transfer roller (C)
Applies the transfer voltage to the transfer belt.
21
Transfer roller (M)
Applies the transfer voltage to the transfer belt.
22
Transfer roller (Y)
Applies the transfer voltage to the transfer belt.
23
Transfer belt
Transfers toner images of the photoconductor onto paper.
24
Waste toner box (Transfer section) Collects waste toner on the transfer belt.
37
39
36
38
40
41
42
44
43
45
46
48
47
49
50
52
57
58
59
53
54
56
55
24
25
26
27
28
29
2
1
3
4
5
6
7
8
9
11
12
13
15
10
14
17
18
19
16
51
20
21
22
23
30
31
34
35
32
33
AR-C262M EXTERNAL VIEW AND INTERNAL STRUCTURE 6 - 6
25
Lift-up unit
Lifts the transfer belt.
26
Paper pickup roller (No. 1 tray)
Sends paper to the paper feed roller.
27
Idle roller
Applies a pressure to paper and the transport roller to provide transport power
of the transport roller to paper.
of the transport roller to paper.
28
Manual paper feed roller
Feed paper to the paper transport section.
29
Paper pickup roller
Sends paper to the paper feed roller.
Manual paper
feed section
feed section
30
Separation roller
Separates paper to prevent double feed.
31
Manual paper transport roller
Transports paper to the resist roller.
32
Upper resist roller
Transports paper to the transfer section.
33
Lower resist roller
Transports paper to the transfer section.
34
Idle roller
Prevents paper skew.
35
Paper transport roller 1
Transports paper to the resist roller.
36
Paper feed roller (No. 1 tray)
Feed paper to the paper transport section.
37
Separation roller (No. 1 tray)
Separates paper to prevent double feed.
38
Idle roller
Applies a pressure to paper and the transport roller to provide transport power
of the transport roller to paper.
of the transport roller to paper.
39
Paper transport roller 2
Transports paper to the transport roller 1.
40
Fusing unit
Fuses toner on paper.
41
Lower heat roller thermistor
Detects the temperature on the fuser roller surface.
42
Lower heat roller thermostat
Detects an abnormally high temperature and turns off the heater lamp.
43
Lower heat roller
Heats and presses toner on paper to fuse toner on paper.
44
Lower heater lamp
Heats the lower fuser roller.
45
Lower separation pawl
Mechanically separates paper which was not separated naturally from the
lower heat roller.
lower heat roller.
46
Fusing transport roller
Transports paper after fusing.
47
Idle roller
Applies a pressure to paper and the transport roller to provide transport power
of the transport roller to paper.
of the transport roller to paper.
48
Gate
Switches the paper exit path. (face up, face down)
49
Upper heater lamp
Heats the heat roller.
50
Upper heat roller
Heats and presses toner on paper to fuse toner on paper.
51
OPC drum
Forms latent static electrostatic images with LED light.
52
Upper heat roller thermistor
Detects the temperature on the heat roller surface.
53
Upper heat roller thermostat
Detects an abnormally high temperature and turns off the heater lamp.
54
Idle roller
Applies a pressure to paper and the transport roller to provide transport power
of the transport roller to paper.
of the transport roller to paper.
55
Transfer belt cleaning blade
Cleans toner on the transfer belt.
56
Paper transport roller 3
Transport paper to the paper exit roller.
57
Belt waste toner transport shaft
Transports waste toner on the transfer belt to the waste toner box.
58
Paper exit roller
Discharges paper to outside of the machine.
59
Idle roller
Applies a pressure to paper and the transport roller to provide transport power
of the transport roller to paper.
of the transport roller to paper.
No.
Parts
Note
Name
Function
AR-C262M EXTERNAL VIEW AND INTERNAL STRUCTURE 6 - 7
F. Motors, clutches, solenoids, fans
No.
Parts
Code,
signal name
Type
Name
Function
1
Exit select gate solenoid
Drives the exit path select gate.
GSS
Electromagnetic solenoid
2
Offset motor (Slide motor)
Drives the paper exit offset.
OSM
Stepping motor
3
Fusing drive motor
Drives the fusing unit.
FUSM
Stepping motor
4
Exhaust fan motor 1
Exhaust and cools the fusing section.
VFMP
DC motor
5
Exhaust fan motor 2
Exhaust and cools the fusing section.
VFMS
DC motor
6
Power unit cooling fan
motor
motor
Cools the power unit.
PSFM
DC motor
7
Drum motor (Y)
Drives the yellow photoconductor unit.
DM_Y
Stepping motor
8
Drum motor (M)
Drives the magenta photoconductor unit.
DM_M
Stepping motor
9
Drum motor (C)
Drives the cyan photoconductor unit.
DM_C
Stepping motor
10
Drum motor (K)
Drives the black photoconductor unit.
DM_K
Stepping motor
11
Printer controller cooling
fan motor
fan motor
Cools the printer controller.
12
PS motor
Drives and turns ON/OFF the resist roller.
PSM
Stepping motor
13
Process cooling fan motor
Exhaust and cools the process section.
PCFM
DC motor
14
Scanner motor
Drives the scanner unit.
SM
Stepping motor
15
PS front clutch
Transmits power of the paper feed motor to the manual paper
feed unit. (Controls ON/OFF.)
feed unit. (Controls ON/OFF.)
MTRC
Electromagnetic clutch
16
Paper feed motor
Drives the paper feed section and the paper transport section. PFM
DC servo motor
17
Paper feed clutch
Transmits power of the paper feed motor to each transport
roller. (Controls ON/OFF.)
roller. (Controls ON/OFF.)
TRC
Electromagnetic clutch
18
Manual paper feed clutch
Controls ON/OFF of the manual paper feed roller. Presses
the paper pickup roller to paper.
the paper pickup roller to paper.
MPFC
Electromagnetic clutch
19
Paper feed drive clutch
Controls ON/OFF of the paper feed roller.
CPFC1
Electromagnetic clutch
20
No. 1 cassette lift-up motor Drives the lift plate.
LUM1
Synchronous motor
21
Belt lift-up motor
Lifts the transfer belt unit.
BLUM
Stepping motor
22
Calibration plate open/
close solenoid
close solenoid
Switches the image density sensor.
CALS
Electromagnetic solenoid
23
Transfer belt motor
Drives the transfer belt.
BTM
Stepping motor
22
23
1
2
3
4
5
6
7
8
9
10
14
11
12
13
15
17
19
20
21
18
16
Click on the first or last page to see other AR-C262M (serv.man3) service manuals if exist.