Sharp AR-C262M (serv.man3) Service Manual ▷ View online
AR-C262M UNPACKING AND INSTALLATION 5 - 7
14. Setup and adjustment data recording
Print the various setup data and the adjustment data (list) with
SIM22-6 and keep the data.
SIM22-6 and keep the data.
In case of a memory trouble, if the data are not kept, all the adjust-
ments must be made again.
ments must be made again.
If the data are kept, the setup values and the adjustment values
can be entered without adjustments, shortening the servicing time.
can be entered without adjustments, shortening the servicing time.
15. Necessary works before moving the
machine
1) If the following options are installed, remove all of them from
the machine.
• Sorter
• Finisher
• Reverse unit
• RADF unit
• Desk unit
2) Remove the following consumable parts from the machine.
• Paper
• Toner cartridge
• Photoconductor cartridge
3) Lock the following sections.
• Scanner (Optical section)
• Paper cassette lift plate
RADF
operation/
Duplex copy
operation
operation/
Duplex copy
operation
S-S mode
D-S mode
S-D mode
When the desk unit with the
duplex unit is installed.
duplex unit is installed.
D-D mode
When the desk unit with the
duplex unit is installed.
duplex unit is installed.
Bookbinding operation
When the finisher is installed.
Stapling operation
When the finisher is installed.
Grouping operation
When the finisher is installed.
Sorting operation
When the finisher is installed.
Check item
Installation
AR-C262M EXTERNAL VIEW AND INTERNAL STRUCTURE 6 - 1
[6] EXTERNAL VIEW AND INTERNAL STRUCTURE
1. Name and function of each section
A. External view
No.
Parts
Name
Function
1
Paper exit tray (Left tray)
Receives discharged paper.
2
Left side cover
Opened to process a paper jam in the fusing unit or the transfer unit.
3
Automatic duplex document feeder Automatically feeds and transports sheet documents to be scanned. Supports duplex
documents and scans the back surface as well as the front surface of a document.
4
Main switch
Turns on/off the power source.
5
Front cover
Opened to replace the toner cartridge.
6
Operation panel
Performs various functions with the operation keys and the touch panel.
7
Upper paper exit tray (Center tray)
Receives discharged paper.
8
Original reminder indication lamp
Flashes when original is left on the copy glass after copying has been completed.
9
Original feed cover
Open the cover to resolve document jams.
10
Original guide
Guide for smooth transfer of original. Set it to the width of the original.
11
Original platform
Set the original here for automatic transport and copying.
12
Original exit section cover
Open the cover to resolve document jams.
13
Original exit section
The original emerges from here after being scanned.
14
Original transport cover
—
15
Original platform (copy glass)
Documents which cannot be copied using the original platform can be placed here and copied.
16
Manual feed tray
Used for manual paper feed.
17
3-stage paper feed desk
Provided with the 3-stage trays for paper feed. Each tray holds about 500 sheets of the
recommended color paper (80g/m² (21 lbs.)) or about 550 sheets of Sharp standard paper
(64g/m² (17 lbs.)). (Option)
recommended color paper (80g/m² (21 lbs.)) or about 550 sheets of Sharp standard paper
(64g/m² (17 lbs.)). (Option)
18
2-stage duplex paper feed desk
Provided with the 2-stage duplex paper feed trays. Each tray holds about 500 sheets of the
recommended color paper (80g/m² (21 lbs.)) or about 550 sheets of Sharp standard paper
(64g/m² (17 lbs.)). For duplex paper exit, the reverse bypass module (AR-RB1) (15) is required.
(Option)
recommended color paper (80g/m² (21 lbs.)) or about 550 sheets of Sharp standard paper
(64g/m² (17 lbs.)). For duplex paper exit, the reverse bypass module (AR-RB1) (15) is required.
(Option)
19
Tray
Holds about 500 sheets of the recommended color paper (80g/m² (21 lbs.)) or about 550
sheets of Sharp standard paper (64g/m² (17 lbs.)).
sheets of Sharp standard paper (64g/m² (17 lbs.)).
20
Left side cover open/close knob
Push up this knob to open the left cover.
21
Reverse bypass module
Reverses paper for automatic duplex paper exit. (Option)
18
19
20
21
1
2
3
4
5
6
7
16
17
When the reverse bypass
module (21) is not installed.
module (21) is not installed.
8
9
10
11 12
14 15
13
RADF
AR-C262M EXTERNAL VIEW AND INTERNAL STRUCTURE 6 - 2
B. Internal structure
No.
Parts
Model
Note
Name
Function
22
Fusing section
Fuses transferred images on paper.
Note: Since the fusing
section is heated to a high
temperature, be careful not
to burn your hands when
processing a paper jam.
section is heated to a high
temperature, be careful not
to burn your hands when
processing a paper jam.
23
Toner cartridges
Toner is in this cartridge. When toner is empty, replace the
empty cartridge with a new one.
empty cartridge with a new one.
24
Right side cover
Opened to process a paper jam in the paper feed section.
25
Paper feed desk right cover Opened to process a paper jam in a peripheral unit.
26
Cleaning lever
Use this level to clean the charger. Provided for each toner
cartridge.
cartridge.
22
23
24
25
26
AR-C262M EXTERNAL VIEW AND INTERNAL STRUCTURE 6 - 3
C. Operation panel
*: When the fax option is installed.
No.
Parts
Name
Function
1
Touch panel
The machine status, messages and touch keys are displayed on the panel. When using the touch
panel, first change the display to the mode that you wish to use: printer mode, copy mode,
network scanner mode, or fax mode*. For details see the next page.
panel, first change the display to the mode that you wish to use: printer mode, copy mode,
network scanner mode, or fax mode*. For details see the next page.
2
Mode select keys and indicators Use to change modes and the corresponding display on the touch panel.
[PRINT] key/READY indicator/DATA indicator: Press to enter the printer mode.
• READY indicator: Print data can be received when this indicator is lit.
• READY indicator: Print data can be received when this indicator is lit.
• DATA indicator: Lights up or blinks when print data is being received. Also lights up or blinks
when printing is being performed.
[IMAGE SEND] key/LINE indicator/DATA indicator: Press this key to switch the display between
network scanner mode and fax mode*.
network scanner mode and fax mode*.
[COPY] key: Press to select the copy mode.
3
[JOB STATUS] key
Press to display the current job status.
4
[CUSTOM SETTINGS] key
Use to adjust the contrast of the touch panel or to set key operator programs.
5
Numeric keys
Use to enter number values for various settings.
6
[ ] key ([ACC.#-C] key)
This is used when the copy, network scan, and fax* functions are used.
7
[#/P] key
This is used as a program key when using the copy function, and to dial when using the fax
function*.
function*.
8
[C] key
This key is used in copy mode, network scanner mode, and fax mode*.
9
[BLACK COPY START] key
This is used to make black and white copies and to scan a black and white original when the
network scan function is used. This is also used to scan an original to be faxed using the fax
function*.
network scan function is used. This is also used to scan an original to be faxed using the fax
function*.
10
[CA] key
This key is used in copy mode, network scanner mode, and fax mode*.
11
[COLOR COPY START] key
This is used to make full-color or single-color copies and to scan a color original when the network
scanner function is used.
scanner function is used.
2
1
9
10
11
8
6
7
3
4
5
Click on the first or last page to see other AR-C262M (serv.man3) service manuals if exist.