Sharp AR-C262M (serv.man3) Service Manual ▷ View online
AR-C262M UNPACKING AND INSTALLATION 5 - 3
Fixing tape and protection pads removal
1) Remove the fixing tape and protection pads from the machine.
Note: The document cover may be supplied as a standard part in
some destinations, and may be an option in some other des-
tinations.
tinations.
2) Open the left door, and remove the transfer fixing pads.
Actuator installation
1) Remove the actuator fixed to the left door.
2) Install the actuator to the paper exit port of the left door.
4. Lock release
A. Scanner (2/3 mirror unit) lock release
1) Remove the scanner fixing screw, and remove the caution
label.
B. Main body cassette lock release
1) Pull out the main body cassette.
2) Remove the rotation plate fixing pad and remove the caution
label.
C. Transfer unit pressure release
1) Pull the knob and open the left door.
1
1
1
1
1
1
1
1
1
3
2
1
2
3
AR-C262M UNPACKING AND INSTALLATION 5 - 4
2) Loosen the roller knob (A), and remove the fusing unit (B).
3) Hold section A of the transfer unit and pull it out so that the
both sides of the transfer unit can be held.
4) Hold sections B and remove the transfer unit.
5) Remove the transfer belt protect sheet.
6) Remove the screw and apply a tension to the transfer belt.
7) Install the transfer unit to the machine.
5. Fusing heat roller pressing (F/R)
1) Pull the knob and open the left door.
2) Turn the pressure release lever to press.
Note: If the machine is left for one month or more, the heat roller
rubber may be deformed. In such a case, therefore, release
the pressure.
the pressure.
A
B
A
B
PULL
AR-C262M UNPACKING AND INSTALLATION 5 - 5
6. Black drum cartridge insertion
1) Pull the knob and open the left door.
2) Open the front cover.
3) Insert the black drum cartridge, and fix it with a screw.
7. Paper exit tray installation
1) Install the paper exit tray to the left door.
Note: The paper exit tray may be supplied as a standard part in
some destinations, and may be an option in some other des-
tinations.
tinations.
8. Toner cartridges installation
1) Shake the toner cartridge horizontally several times.
2) Remove the tape, and remove the protection pad.
3) Open the front cover.
4) Insert the toner cartridge.
∗
As shown below, fit the cartridge with the insertion port and
push it in.
push it in.
Note: Be sure to install the color cartridges to their proper posi-
tions. Avoid instillation to a different color position.
[Color toner cartridge positions]
1
2
3
2
1
Black
Cyan
Magenta
Yellow
AR-C262M UNPACKING AND INSTALLATION 5 - 6
5) Insert the cartridge securely until it locks.
6) Return the cartridge lever to the original position.
7) Close the front cover.
9. AC cord connection
1) Insert the AC power plug into the connector at the rear of the
machine, and connect the other end to the power outlet.
10. Machine power ON
1) Turn on the power switch on the left side of the machine.
11. Specifications setup
Used to set the specifications with SIM26 according to the cus-
tomer's request.
tomer's request.
To customize the following items after completion of the destina-
tion setup, change the set values.
tion setup, change the set values.
On completion of the installation of the AR-F13 finisher, please
change the default output tray of the machine to the top tray of the
finisher.
change the default output tray of the machine to the top tray of the
finisher.
12. Image quality check
Check the following items related to image quality. For details of
the adjustment and checking procedures, refer to the chapter of
adjustments.
the adjustment and checking procedures, refer to the chapter of
adjustments.
1) Image focus, image skew (Refer to ADJ 3.)
2) Image registration (Refer to ADJ 4.)
3) Image loss, void area (Refer to ADJ 10.)
4) Copy color balance, density (Refer to ADJ 11.)
Check that the above items are normal. If not, make the adjust-
ment.
ment.
13. Function and operation check
Check that the following operations are normal.
Do not press
this section.
(If it is pressed,
the lock lever
falls.)
this section.
(If it is pressed,
the lock lever
falls.)
1
2
SIM No
Content
26
6
Used to set the destination.
SIM No
Content
26
2
Used to set the large capacity paper feed tray paper
size.
size.
Used to set the detection paper size and display when
using 8.5 x 13 size paper and document.
using 8.5 x 13 size paper and document.
Used to set the paper kind and the display form in the
manual paper feed mode.
manual paper feed mode.
3
Used to set the auditor specification mode.
5
Used to set the count mode of the total counter and the
maintenance counter.
maintenance counter.
18 Used to set YES/NO of the toner save mode (Only in UK
and Japan versions) For other destination versions, this
setup is made by the user program.
setup is made by the user program.
52 Used to set YES/NO of counting when non-print paper is
passed through each counter.
53 Used to set YES/NO of user calibration permission.
65 Used to set the limit number of sheets for stapling.
Check item
Installation
Key input operation (Operation
panel)
panel)
Display (Operation panel)
Paper feed
operation
operation
Manual paper
feed
feed
Machine paper
tray
tray
Desk unit paper
feed tray
feed tray
When the desk unit is installed.
Large capacity
paper feed tray
paper feed tray
When the large capacity paper
feed tray is installed.
feed tray is installed.
Paper size detection operation
Document size
detection
operation
detection
operation
Document table
mode
mode
RADF mode
Click on the first or last page to see other AR-C262M (serv.man3) service manuals if exist.