DOWNLOAD Sharp AR-C200P (serv.man10) Service Manual ↓ Size: 6.26 MB | Pages: 127 in PDF or view online for FREE

SETTING UP > 21

If fitted, a lower paper tray cannot be used to print if there is 
no paper tray inserted above it.

SETTING UP > 22

For face down printing, make sure the rear paper exit is closed 
(the paper exits from the top of the printer). Paper is stacked in 
printed order and paper tray capacity is approximately 500 
sheets, depending on paper weight.

For face up printing, make sure the rear paper exit is open and 
the paper support is extended. Paper is stacked in reverse 
order and tray capacity is approximately 100 sheets, 
depending on paper weight.

Load letter headed paper face down as shown for both portrait 
and landscape:

Always use the rear stacker for thick paper (card stock etc.)

SETTING UP > 23

Open the multi purpose tray and extend the paper feed guides.

Load the paper and adjust the paper guides to the size of 
paper being used.

Load the paper into the multi purpose tray with the print face 
upward for single sided printing and print face downward for 
duplex printing.

Don’t exceed the Paper Full line (about 100 sheets depending 
on paper weight).

SETTING UP > 24

Load envelopes or letter headed paper face up as shown for 
both portrait and landscape printing.