Sharp AR-651 (serv.man25) User Manual / Operation Manual ▷ View online
1
2
3
4
5
6
7
8
9
10
11
12
5-11
2
Press the NON-STANDARD key.
1
Perform steps 1 to 3 on page 5-10.
The size of non-standard paper is within the following ranges:
Length: 100 - 297mm Width: 148 - 432mm
Length: 100 - 297mm Width: 148 - 432mm
3
Key in each dimension (length and width), or recall
the data stored in the MEMORY. Then press the lower
SET key.
- When using the digital keys to key in the size:
Key in the length and press the upper SET key. Simlarly, set
the value for the width.
- Press the MEMORY 1 (or MEMORY 2 , MEMORY 3 ,
MEMORY 4 ) key and the paper size memorized in the
MEMORY 1 appears.
MEMORY 1 appears.
- Storing a non-standard size in the memory
Page 5-12
Select other copy modes as required.
4
Press the START key.
Bypass Copying on Non-Standard Size Paper
1
2
3
4
5
6
7
8
9
10
11
12
5-12
USING THE SPECIAL FUNCTIONS
3
Press the desired Memory Number key.
- When the paper size is ‘0mm’, the selected Memory Number
key is vacant.
- When the paper size is displayed, a non-standard size is already
stored in the selected Memory Number key. To delete the settings,
perform step 4. New settings will be rewritten and stored on that
Memory Number key.
perform step 4. New settings will be rewritten and stored on that
Memory Number key.
Storing a Non-Standard Size in the MEMORY
4
Key in each dimension, then press the MEMORY
key.
- Key in the length and press the upper SET key. Similarly,
set the value for the width.
- The paper size is stored in the shaded Memory Number key.
It is convenient if a frequently used non-standard size of paper is stored in the memory.
4. BYPASS COPYING(cont.)
Bypass Copying on Non-Standard Size Paper(cont.)
2
Press the NON-STANDARD key.
1
Perform steps 1 to 3 on page 5-10.
1
2
3
4
5
6
7
8
9
10
11
12
5-13
5. WEEKLY TIMER
Using the built-in weekly timer, you can have the copier automatically turned ON and OFF at specified
times. For instance, you can set the timer for the starting time and closing time of your office so that the
copier will automatically turn itself ON and OFF at those specified times.
- The ON/OFF times of the weekly timer are retained until they are changed. When the weekly timer is resumed, the
previous settings will again become effective.
- When the weekly timer is in use, the timer lamp on the control panel lights.
* When the power switch is turned off, the weekly timer does not work.
times. For instance, you can set the timer for the starting time and closing time of your office so that the
copier will automatically turn itself ON and OFF at those specified times.
- The ON/OFF times of the weekly timer are retained until they are changed. When the weekly timer is resumed, the
previous settings will again become effective.
- When the weekly timer is in use, the timer lamp on the control panel lights.
* When the power switch is turned off, the weekly timer does not work.
1
Press the PROGRAM key to enter the programme
menu, and press the WEEKLY TIMER key.
- The WEEKLY TIMER key is half-tone shaded when the weekly
timer has already been set.
2
Check the settings on the display, and if corrections
are necessary, press the CHANGE key.
- If no correction is needed, press the SET key.
3
Set the ON/OFF times for each day of the week.
- Use the
SUN and SAT
keys to switch the days of the
week.
- Key in numbers using the digital keys. After entering each
number, press the upper SET key.
- After setting the times for all the days of week, press the lower
SET key. The WEEKLY TIMER key becomes half-tone
shaded.
shaded.
Copying when the power is off
The copier can be used if you press START key.
- If you leave the copier for a while after the copy is finished, it will
automatically return to OFF-mode by the weekly timer.
automatically return to OFF-mode by the weekly timer.
For holidays when the copier is not turned on, key in the same
times for both ON and OFF, eg. ON:00:00 and OFF:00:00.
times for both ON and OFF, eg. ON:00:00 and OFF:00:00.
1
2
3
4
5
6
7
8
9
10
11
12
5-14
USING THE SPECIAL FUNCTIONS
When original or paper size is required to be specified and you
need to specify it to ‘OTHER’ size (except for non-standard size),
this function should be used.
- This function allows the OTHER key on the screen on the right
to recognize the size that will be used. The initial setting for this
key is FOLIO.
need to specify it to ‘OTHER’ size (except for non-standard size),
this function should be used.
- This function allows the OTHER key on the screen on the right
to recognize the size that will be used. The initial setting for this
key is FOLIO.
6. SETTING THE “OTHER” SIZE KEY
1
Press the PROGRAM key to enter the programme
menu, and press the OTHER KEY key.
2
Press the PAPER SIZE key of the paper corresponding
to the size that will be used.
- Setting has been completed.
If you select ‘LT’ in step 2 for instance, the OTHER keys (both
ORIGINAL and PAPER SIZE keys) are recognized as LT size.
ORIGINAL and PAPER SIZE keys) are recognized as LT size.
Click on the first or last page to see other AR-651 (serv.man25) service manuals if exist.