Sharp AR-405 (serv.man31) User Manual / Operation Manual ▷ View online
5-7
CHAPTER
5
MISFEED REMOVAL
COPIER TROUBLE?
Misfeed removal
3
Turn the transport lever back into place.
3
Close the front cover.
●
Confirm that the misfeed display is cleared.
Misfeed around the fusing unit and exit area
NOTE:
If an optional finisher (AR-FN1N) is fitted, please refer to chapter 7
Optional Equipment for additional misfeed removal help.
Optional Equipment for additional misfeed removal help.
1
Open the front cover.
2
Open the exit area cover carefully.
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
Transport lever
5-8
CHAPTER
5
MISFEED REMOVAL
3
Remove the misfed paper.
If the misfed paper is in the inner part of the exit area:
1
Turn roller rotating knob
B
in the direction of the arrow and
remove the paper.
2
If the misfed paper is deep in the fusing unit, lift the fusing unit
tab and remove any misfed paper.
tab and remove any misfed paper.
CAUTION
The fusing unit is hot! Be sure to touch only the green tab or the
green roller rotating knob.
green roller rotating knob.
If the misfed paper is in the exit area:
1
Turn roller rotating knob
C
in the direction of the arrow and
remove the paper.
2
If the misfed paper cannot be removed in step
1
, raise exit
area lever
C
and remove the paper.
4
Close the exit area cover.
COPIER TROUBLE?
Misfeed removal
Fusing unit tab
Roller rotating knob B
Exit area lever C
Roller rotating knob C
5-9
CHAPTER
5
MISFEED REMOVAL
COPIER TROUBLE?
Misfeed removal
5
Close the front cover.
●
Confirm that the misfeed display is cleared.
Misfeed in the duplex module
NOTE:
If the optional finishers (AR-FN1N, AR-FN2) is fitted, please refer to
chapter 7 Optional Equipment for additional misfeed removal help.
If the optional finishers (AR-FN1N, AR-FN2) is fitted, please refer to
chapter 7 Optional Equipment for additional misfeed removal help.
If the misfed paper is in the duplex module or the section below the
exit area:
exit area:
1
Open the exit area cover carefully.
2
Remove the misfed paper.
1
Open the paper guide, turn roller rotating knob
D
in the
direction of the arrow and remove the misfed paper.
Close the paper guide.
Close the paper guide.
2
Remove any misfed paper from the duplex module.
●
Be careful not to tear the misfed paper during removal.
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
Paper
guide
guide
Roller rotating knob D
5-10
CHAPTER
5
Paper feed area open/close lever
3
Remove the misfed paper from the section below the exit area.
3
Close the exit area cover.
If the misfed paper is in the right side of the duplex module:
1
Open the right side cover.
●
Hold the handle and gently open the cover.
●
If any paper is set in the bypass tray, remove the paper and close
the bypass tray before opening the right side cover.
the bypass tray before opening the right side cover.
2
Remove the misfed paper.
●
Open the paper feed area open/close lever in the direction of the
arrow and remove the misfed paper.
arrow and remove the misfed paper.
3
Close the right side cover.
●
Confirm that the misfeed display is cleared.
COPIER TROUBLE?
Misfeed removal
MISFEED REMOVAL
Click on the first or last page to see other AR-405 (serv.man31) service manuals if exist.