Sharp AR-405 (serv.man31) User Manual / Operation Manual ▷ View online
3-41
CHAPTER
3
9
Press the upper “OK” key.
10
Make all other desired copier selections and enter the
desired number of copies.
desired number of copies.
11
Press the START (
) key.
●
If the document feeder is used, copying will start after all originals
are scanned.
are scanned.
●
If the document glass is used, proceed to the next step.
12
Replace the finished original with the next original after
the START (
the START (
) key indicator lights up, and then press
the START (
) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
on the touch panel.
●
Copying will start at this time.
●
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
of originals larger than A4 (8-1/2" x 11") can be scanned.
●
To cancel the PAGE NUMBER function, select the PAGE
NUMBER function again and press the “CANCEL” key.
NUMBER function again and press the “CANCEL” key.
EXT STAMP
DATE
SELECT
STAMP
PRINT
DIRECTION
PAGE
NUMBER
WATERMARK
OK
OK
1
2
3
4
5
6
7
8
9
0
P
PROGRAM
AUDIT CLEAR
INT
CA
CLEAR ALL
START
SPECIAL FUNCTIONS
Text stamp
TEXT STAMP
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
WHEN FINISHED, PRESS [READ-END].
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
3-42
CHAPTER
3
The current settings of copier functions can be displayed on the touch
panel.
panel.
SETTING REVIEW
1
Press the REVIEW (
) key.
●
The REVIEW screen will appear.
The settings of the duplex mode (1-sided to 1-sided, etc.), sort/
group mode, and special functions will be displayed. The
exposure, paper size, and copy ratio which are displayed on the
basic screen will not be displayed on the REVIEW screen.
group mode, and special functions will be displayed. The
exposure, paper size, and copy ratio which are displayed on the
basic screen will not be displayed on the REVIEW screen.
2
To review all setting information, it may be necessary to
scroll between review screens. To scroll between
screens, use the
scroll between review screens. To scroll between
screens, use the
or
key.
3
To exit the review screen, press the “EXIT” key.
●
The basic screen will appear again.
100%
COPY RATIO
IDED COPIES OF 1-SIDED
GINALS
PLE SORT
PLE SORT
HIFT :SIDE 1 SIDE 2
10 mm 10 mm
2inl
2inl
NO BORDER
Confidential
Confidential
1ST PAGE ONLY
OT :
TAMP :
1/2
ED COPIES OF 1-SIDED
NALS
EXIT
1/2
E SORT
FT :SIDE 1 SIDE 2
10 mm 10 mm
2inl
2inl
NO BORDER
Confidential
Confidential
:
MP
SPECIAL FUNCTIONS
Setting review
EXIT
1-SIDED COPIES OF 1-SIDED
ORIGINALS
STAPLE SORT
STAPLE SORT
MARGIN SHIFT :
REVIEW
SIDE 1 SIDE 2
10 mm 10 mm
2inl
2inl
NO BORDER
Confidential
Confidential
1ST PAGE ONLY
MULTI SHOT :
SELECT STAMP :
1/2
Example
4-1
CHAPTER
4
CHAPTER 4
SUPPLIES
This chapter describes the supplies for this copier such as paper and
toner.
toner.
Page
●
●
●
●
●
PAPER
.........................................
4-2
Types and sizes of copy paper
.........................
4-2
Loading copy paper
................................
4-2
●
●
●
●
●
ADDING TONER
..................................
4-5
●
●
●
●
●
USED TONER DISPOSAL
...........................
4-7
●
●
●
●
●
STORAGE OF SUPPLIES
...........................
4-8
4-2
CHAPTER
4
PAPER
Types and sizes of copy paper
Size
Weight
Capacity
Special paper
(80
g
/m
2
(21lb.)
paper)
Paper trays
A5 to A3
56 to 105
g
/m
2
500 sheets
1 and 2
(5-1/2" x 8-1/2"
(15 lbs. to 28 lbs.)
to 11" x 17")
Bypass tray
A6 to A3
52 to 128
g
/m
2
50 sheets
Transparency film, labels,
(5-1/2" x 8-1/2"
(14 lbs. to 34 lbs.)*
tracing paper, cover stock**
to 11" x 17")
(Ordinary paper)
(200
g
/m
2
(110 lbs.)), index
stock** (176
g
/m
2
(65 lbs.))
●
For best results, use only paper recommended by SHARP.
* For paper weighing from 105 to 128
g
/m
2
(28 to 34 lbs.), A4 (8-1/2"
x 11") is the maximum size that can be fed through the bypass tray.
** Paper heavier than 128
g
/m
2
(34 lbs.) must be fed narrow side into the
feed slot of the bypass tray.
Loading copy paper
“
OPEN TRAY AND ADD PAPER.
” will be displayed when there is
no copy paper in a selected paper feed station.
When a selected paper tray is not installed or is improperly installed,
“
When a selected paper tray is not installed or is improperly installed,
“
PUSH PAPER TRAY INTO THE MACHINE UNTIL IT
LATCHES.
” will be displayed. Install it or push it back firmly into
place.
For best results, use only Sharp recommended paper.
For best results, use only Sharp recommended paper.
SUPPLIES
Paper
Click on the first or last page to see other AR-405 (serv.man31) service manuals if exist.