Sharp AR-285 (serv.man12) Service Manual ▷ View online
46 - 13
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print density in the FAX mode (normal character mode).
(SIM 46-13A is same as SIM 46-12.) (Target model: AR-F230/S280/F280S/F280R)
(FAX model only)
(SIM 46-13A is same as SIM 46-12.) (Target model: AR-F230/S280/F280S/F280R)
(FAX model only)
Section
Item
Picture quality
Density
Operation/
Procedure
Procedure
1. Select the print mod with [
↑
], [
↓
] keys.
(The set value is highlighted.)
2. Enter the adjustment value with the 10-key.
3. Press the [OK] key or the [PRINT button]. (The value entered in procedure 2 is set.)
When the [PRINT button] is pressed, copying is performed.
To customize the print density in each mode according to the user’s request, use this simulation to adjust the print density.
Default: 100
Note
Japan only
8 – 95
46 - 14
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print density in the FAX mode (small character modes).
(Target models: AR-F230/S280/F280S/F280R) (FAX model only)
(Target models: AR-F230/S280/F280S/F280R) (FAX model only)
Section
Item
Picture quality
Density
Operation/
Procedure
Procedure
1. Select the print mod with [
↑
], [
↓
] keys.
(The set value is highlighted.)
2. Enter the adjustment value with the 10-key.
3. Press the [OK] key or the PRINT button. (The value entered in procedure 2 is set.)
When the PRINT button is pressed, copying is performed.
To customize the print density in each mode according to the user’s request, use this simulation to adjust the print density.
Default: 100
Note
Japan only
8 – 96
46 - 15
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print density in the FAX mode (fine modes). (Target models: AR-F230/S280/F280S/F280R)(FAX
model only)
model only)
Section
Item
Picture quality
Density
Operation/
Procedure
Procedure
1. Select the print mod with [
↑
], [
↓
] keys.
(The set value is highlighted.)
2. Enter the adjustment value with the 10-key.
3. Press the [OK] key or the [PRINT] button. (The value entered in procedure 2 is set.)
When the [PRINT] button is pressed, copying is performed.
To customize the print density in each mode according to the user’s request, use this simulation to adjust the print density.
Default: 100
Note
Japan only
8 – 97
46 - 16
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print density in the FAX mode (fine modes). (Target models: AR-F230/S280/F280S/F280R)(FAX
model only)
model only)
Section
Item
Picture quality
Density
Operation/
Procedure
Procedure
1. Select the print mod with [
↑
], [
↓
] keys.
(The set value is highlighted.)
2. Enter the adjustment value with the 10-key.
3. Press the [OK] key or the PRINT button. (The value entered in procedure 2 is set.)
When the PRINT button is pressed, copying is performed.
To customize the print density in each mode according to the user’s request, use this simulation to adjust the print density.
Default: 100
Note
Japan only
8 – 98
Click on the first or last page to see other AR-285 (serv.man12) service manuals if exist.