DOWNLOAD Sharp AR-285 (serv.man12) Service Manual ↓ Size: 877.93 KB | Pages: 118 in PDF or view online for FREE

62 - 2

Purpose

Operation test/check

Function
(Purpose)

Used to check the operation (read/write) of the hard disk. (Target models: AR-S330/280/285/335)(Models with the
hard disk installed only.) (Partial check) 

Section

Memory

Item

Operation

Operation/
Procedure

1. Press the [EXECUTE] key to start the read/write operation check.

2. After completion of the read/write operation check, the result is displayed with OK or NG.

If NG is displayed, it means a hard disk trouble.

Note

62 - 3

Purpose

Operation test/check

Function
(Purpose)

Used to check the operation (read/write) of the hard disk.  (Target models: AR-S330/280/285/335) (Only the
models with a hard disk) (All area check) 

Section

Memory

Item

Operation

Operation/
Procedure

1. Press the [EXECUTE] key to start the read/write operation check.

2. After completion of the read/write operation check, the result is displayed with OK or NG.

If NG is displayed, it means a hard disk trouble.

Note

8 – 111

63 - 1

Purpose

Operation data output/Check (Display/Print)

Function
(Purpose)

Used to check the result of shading correction. (The shading correctiondata are displayed.)

Section

Scanner (Exposure)

Item

Operation

Operation/
Procedure

Used to display the result of latest shading correction.
The displayed page can be shifted with [

↑

], [

↓

] keys.

ODD/EVEN OFFSET: Difference between the average detection level and the max. detection level

BLACK OFFSET:

Dark component (average level)

Note

64 - 1

Purpose

Operation test/check

Function
(Purpose)

Used to check the operation of the printer function (auto print operation). (Print pattern, paper feed mode, print
mode, the number of sheets, and the density can be set to an arbitrary value.)

Section

Printer

Item

Operation

Operation/
Procedure

1. Select the item with [

↑

], [

↓

] keys.

2. Enter the print conditions with the 10-key. (There are 29 kinds of print patterns.)

3. Press the [EXECUTE] key.

Printing is executed under the condition set with procedure 2.

8 – 112

A: Self print pattern

…………

 1. ALL 1BY1(V)

B: Density level

  2. ALL 1BY1(H)

C: Self print number setting

  3. ALL 1BY2(V)

D: Picture quality mode

  4. ALL 1BY2(H)

   1: Auto

 5. ALL 1BY3(V)

   2: Character

 6. ALL 1BY3(H)

   3: Character/Photo

 7. ALL 1BY4(V)

   4: Photo

 8. ALL 1BY4(H)

E: Paper feed source select

  9. ALL 1BY5(V)

    1: Manual

10. ALL 1BY5(H)

    2: Upper cassette

11. ALL 2BY2(V)

    3: Lower cassette

12. ALL 2BY2(H)

    4: Desk top cassette

13. ALL 2BY3(V)

    5: Desk middle cassette

14. ALL 2BY3(H)

    6: Desk bottom cassette

15. BLACK

    7: LCC

16. GLAY SCALE 120/4(V)

F: Duplex print select

17. GLAY SCALE 120/4(H)

    1: Single

18. GLAY SCALE 250/8(V)

    2: Duplex

19. GLAY SCALE 250/8(H)

20. GLAY SCALE 250/2(V)

21. GLAY SCALE 250/2(H)

22. SQUARE

23. SLANT 45

24. SLANT 26.6

25. SLANT 63.4

26. ID/BG

27. DOT PATTERN 12.5%

28. DOT PATTERN 25%

29. DOT PATTERN 50%

Note

8 – 113

65 - 1

Purpose

Adjustment

Function
(Purpose)

Used to adjust the touch panel (LCD display) detecting position.

Section

Operation (Display/Operation key)

Item

Operation/
Procedure

Touch the four cross marks.
The coordinates at the pressed point are set.
When the coordinates are properly set, the display turns to gray and returns to the simulation sub code entry
screen.
In case of an abnormality, it returns to the input display.

Note

65 - 2

Purpose

Operation data output/Check (Display/Print)

Function
(Purpose)

Used to check the result of the touch panel (LCD display) detecting position adjustment. (The coordinates are
displayed.)

Section

Operation (Display/Operation key)

Item

Operation/
Procedure

When the touch panel is pressed, the AD value in each of X and Y directions at that point and the coordinate
values are displayed in ( ) as well as the coordinate values of each point.
It is based on the coordinates set with SIM 65-1.

Note

8 – 114