Sharp AR-285 (serv.man12) Service Manual ▷ View online
46 - 5
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print density for each density level (display value) in the copy mode (multi Auto mode).
An arbitrary print density can be set for each density level (display value).
An arbitrary print density can be set for each density level (display value).
Section
Item
Picture quality
Density
Operation/
Procedure
Procedure
1. Select the density level with the density adjustment key.
(The selected value is highlighted.)
2. Enter the adjustment value with the 10-key.
3. Press the ENTER key or the PRINT button.
(The value entered in procedure 2 is set.)
When the PRINT button is pressed, copying is performed.
To customize the print density for the density level display value according to the user’s request, use this simulation.
To customize the print density for the density level display value according to the user’s request, use this simulation.
Default: 100
Note
46 - 6
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print density for each density level (display value) in the copy mode (multi value-character,
photo mode).
An arbitrary print density can be set for each density level (display value).
photo mode).
An arbitrary print density can be set for each density level (display value).
Section
Item
Picture quality
Density
Operation/
Procedure
Procedure
Operation/
Procedure
Procedure
1. Select the density level with the density adjustment key.
(The selected value is highlighted.)
2. Enter the adjustment value with the 10-key.
3. Press the ENTER key or the PRINT button. (The value entered in procedure 2 is set.)
When the PRINT button is pressed, copying is performed.
To customize the print density for the density level display value according to the user’s request, use this simulation.
To customize the print density for the density level display value according to the user’s request, use this simulation.
Default: 100
Note
8 – 91
46 - 7
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print density for each density level (display value) in the copy mode (multi value - photo mode).
An arbitrary print density can be set for each density level (display value).
An arbitrary print density can be set for each density level (display value).
Section
Item
Picture quality
Density
Operation/
Procedure
Procedure
1. Select the density level with the density adjustment key. (The selected value is highlighted.)
2. Enter the adjustment value with the 10-key.
3. Press the [ENTER] key or the [PRINT button]. (The value entered in procedure 2 is set.)
When the [PRINT button] is pressed, copying is performed.
To customize the print density for the density level display value according to the user’s request, use this
simulation.
2. Enter the adjustment value with the 10-key.
3. Press the [ENTER] key or the [PRINT button]. (The value entered in procedure 2 is set.)
When the [PRINT button] is pressed, copying is performed.
To customize the print density for the density level display value according to the user’s request, use this
simulation.
Default: 100
Note
46 - 9
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print density for each density level (display value) in the copy mode (binary - character mode).
An arbitrary print density can be set for each density level (display value).
An arbitrary print density can be set for each density level (display value).
Section
Item
Picture quality
Density
Operation/
Procedure
Procedure
1. Select the density level with the density adjustment key.
(The selected value is highlighted.)
2. Enter the adjustment value with the 10-key.
3. Press the ENTER key or the PRINT button. (The value entered in procedure 2 is set.)
When the PRINT button is pressed, copying is performed.
To customize the print density for the density level display value according to the user’s request, use this simulation.
To customize the print density for the density level display value according to the user’s request, use this simulation.
Default: 100
Note
8 – 92
46 - 10
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print density for each density level (display value) in the copy mode (binary - character, photo
mode).
An arbitrary print density can be set for each density level (display value).
mode).
An arbitrary print density can be set for each density level (display value).
Section
Item
Picture quality
Operation/
Procedure
Procedure
1. Select the print mod with [
↑
], [
↓
] keys.
(The set value is highlighted.)
2. Enter the adjustment value with the 10-key.
3. Press the [OK] key or the PRINT button. (The value entered in procedure 2 is set.)
When the PRINT button is pressed, copying is performed.
To customize the print density in each mode according to the user’s request, use this simulation to adjust the print density.
Default: 100
Note
46 - 11
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print density for each density level (display value) in the copy mode (binary - photo mode).
An arbitrary print density can be set for each density level (display value).
An arbitrary print density can be set for each density level (display value).
Section
Item
Picture quality
Density
Operation/
Procedure
Procedure
1. Select the print mod with [
↑
], [
↓
] keys.
(The set value is highlighted.)
2. Enter the adjustment value with the 10-key.
3. Press the [OK] key or the PRINT button. (The value entered in procedure 2 is set.)
When the PRINT button is pressed, copying is performed.
To customize the print density in each mode according to the user’s request, use this simulation to adjust the print density.
Default: 100
Note
8 – 93
46 - 12
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print density in the FAXmode (all modes).
The print densities in all the modes (all of the densities which ???
(Same as SIM 46-1-3A) (Target model: AR-F230/S280/F280S/F280R)(FAX)
The print densities in all the modes (all of the densities which ???
(Same as SIM 46-1-3A) (Target model: AR-F230/S280/F280S/F280R)(FAX)
Section
Item
Picture quality
Density
Operation/
Procedure
Procedure
1. Select the print mod with [
↑
], [
↓
] key.
(The set value is highlighted.)
2. Enter the adjustment value wit the 10-key.
3. Press the [OK] key or the PRINT button. (The value entered in procedure 1 is set.) When the PRINT button is pressed,
copying is performed.
When the adjustment value is changed, the print density in the other modes (All FAX modes) is similarly changed.
(The set values of SIM 46-13 to -16 are changed accordingly.)
Normally the print density adjustment in the FAX mode is made with this simulation.
To make the print density adjustment in each mode, use SIM 46-13 to 46-16.)
When the adjustment value is changed, the print density in the other modes (All FAX modes) is similarly changed.
(The set values of SIM 46-13 to -16 are changed accordingly.)
Normally the print density adjustment in the FAX mode is made with this simulation.
To make the print density adjustment in each mode, use SIM 46-13 to 46-16.)
(Note) When the set value in the left column of the table below is changed with this simulation, the set value (overall
density level adjustment value) in the right column is also changed accordingly.
The parameters in the right and the left columns and the adjustment items are the adjustment values in the same
print mode.
The result of the adjustment set by the last simulation is applied to the actual print. Normally SIM 46-12 is used to
adjust the print density. To customize the print density for the density level display according to the user’s request,
the simulation in the right column is used.
The parameters in the right and the left columns and the adjustment items are the adjustment values in the same
print mode.
The result of the adjustment set by the last simulation is applied to the actual print. Normally SIM 46-12 is used to
adjust the print density. To customize the print density for the density level display according to the user’s request,
the simulation in the right column is used.
(FAXmode)
Parameter set/changed by SIM
46-12
Linked simulation data
Normal character mode
Sim 46-13
Small charater mode
Sim 46-14
Fine mode
Sim 46-15
Super fine mode
Sim 46-16
Default: 100
Note
Japan only
8 – 94
Click on the first or last page to see other AR-285 (serv.man12) service manuals if exist.