DOWNLOAD Sharp AR-285 (serv.man12) Service Manual ↓ Size: 877.93 KB | Pages: 118 in PDF or view online for FREE

41 - 3

Purpose

Operation test/check

Function
(Purpose)

Used to check the operation of the document size sensor and the related circuit. (The document size sensor
output level can be monitored with the LCD.)

Section

Others

Item

Operation

Operation/
Procedure

The detection output level of each sensor is displayed in real time.

OCSW

Document cover state

PD*

Document sensor

 The value in [ ] shown at the right of each sensor name is the threshold value.

Note

43 - 1

Purpose

Setting

Function
(Purpose)

Used to set the fusing temperature in each operation mode.

Section

Fixing (Fusing)

Item

Operation

Operation/
Procedure

1. Select the kind of lamps and the operation mode with [

↑

], [

↓

] keys.

2. Enter the set value with the 10-key.

3. Press the [OK] key to set the fusing temperature set in procedure 2.

Used to set the fusing temperature in the normal mode and in the power save mode.

INSIDE NORMAL:

The control temperature in the normal mode and when the center lamp is heated. (190)

OUTSIDE NORMAL:

The control temperature in the power save mode (pre-heat mode) and the side lamps are heated.
(190)

INSIDE PREHEAT:

The control temperature in the manual copy mode when the center lamp is heated. (*1)

OUTSIDE PREHEAT: The control temperature in the manual copy mode when the side lamps are heated. (*2)

INSIDE MFT:

The control temperature in the manual copy mode when the center lamp is heated. (200)

OUTSIDE MFT:

The control temperature in the manual copy mode when the side lamps are heated. (200)

(  ): Default

8 – 83

Model/Destination

Set value

*1

*2

Japan

130

130

AR-335

130

130

AR-280/285 (100V series)

125

125

AR-280/285 (200V series)

110

110

Note

Be sure to set to the default value. If not, a trouble may occur.

44 - 1

Purpose

Setting

Function
(Purpose)

Used to set whether the correction functions of the image forming (process) section are valid or not.

Section

Image process
(Photoconductor/Developing/Transfer/Cleaning)

Item

Operation

Operation/
Procedure

Enter the code number corresponding to each correction operation with the 10-key and press the OK key.
To enable all the correction functions, set to 3.

(Note) The default setting must be 3.

Set value

Developing bias voltage

correction limit

OPC drum sensitivity

correction

0

Disable

Disable

1

Disable

Enable

2

Enable

Disable

3

Enable

Enable

Note

(Note) It must be set to the default 3.

8 – 84

44 - 2

Purpose

Adjustment

Function
(Purpose)

Used to adjust the sensitivity (gain) of the OPC drum mark sensor and the image density sensor.

Section

Image process
(Photoconductor/Developping/Transfer/Cleaning)

Photo conductor

Item

Operation

Operation/
Procedure

When the [EXECUTE] key is pressed, it is highlighted and the main motor rotates to start the drum marking
sensor and the image density sensor gain adjustment. (The adjustment is automatically performed.)
After completion of the adjustment, the [EXECUTE] key returns to the normal display and the main motor stops.
At that time, the gain level of each sensor is displayed.
If the adjustment is not completed properly, the ERROR display is shown.

DMLED: Drum marking sensor gain adjustment value
PCLED: Image density sensor gain adjustment value

Note

44 - 4

Purpose

Setting

Function
(Purpose)

Used to set the target image (reference) density level in the developing bias voltage correction.
(for OPC drum type B)

Section

Image process
(Photoconductor/Developping/Transfer/Cleaning)

Item

Data

Adjust/Setting data

Operation/
Procedure

1. Enter the set value (38) with the 10-key.

2. Press the [OK] key. (The value entered in procedure 1 is set.)

Set value: 38

Note

It must be set to 38.

8 – 85

44 - 5

Purpose

Setting

Function
(Purpose)

Used to set various parameters (main charger grid voltage, laser beam power, correction start developing bias
voltage) in developing bias correction.
(for OPC drum type B)

Section

Image process
(Photoconductor/Developing/Transfer/Cleaning)

Item

Operation

Operation/
Procedure

1. Select the parameter mode with [

↑

], [

↓

] keys.

2. Enter the parameter with the 10-key.

3. Press the [OK] key. (The value entered in procedure 2 is set.)

GRID BIAS VOL:

Reference charging voltage level in patch forming (380) (Set value)

DEVE BIAS VOL : Reference developing bias voltage level in patch forming (210) (Set value)

LASER DUTY:

Laser duty level in patch forming (255)

Note

Be sure to set to the specified value. If not, the print image density may be disturbed.

44 - 9

Purpose

Operation data output/Check (Display/Print)

Function
(Purpose)

Used to check the data on the result of the image forming section correction (process correction) (the corrected
main charger grid voltage in each print mode, developing bias voltage, the laser power, etc.)
(This simulation allows to check whether the correction is executed properly or not.)

Section

Image process
(Photoconductor/Developping/Transfer/Cleaning)

Item

Data

Operation data (Machine condition)

Operation/
Procedure

Used to display the drum rotating time and the high voltage output in each copy mode and the laser power
correction power.

DRUM ROTATION:

Drum rotating time (sec)

DEVE RFERENCE ADJUST: Toner concentration correction amount
DRUM:

Drum identification result (1: Type A   2: Type B   C: Others)

GR_BS:

Main charger grid voltage level (*1)

DV_BS:

Developing bias voltage level (*1)

           ((Display) *1 : Sim 8-1, 8-2 Set voltage/actual output voltage (including corrected amount)

LD_AD:

Laser power correction power display (mW)

AUTO:

Auto mode

CHARA:

Character mode

CHARA_P: Character/photo mode
PHOTO:

Photo mode

PRT:

Printer mode

FAX:

Fax mode (Japan only)

8 – 86