Sharp AR-205 (serv.man27) User Manual / Operation Manual ▷ View online
63
OPTIONAL EQUIPMENT
Misfeed removal
Location A
Location B
Location C
A
C
B
Feeding roller cover
Right side cover
SINGLE PASS FEEDER (AR-SP2)/REVERSING SINGLE PASS FEEDER (AR-RP1)
Single pass feeder (AR-SP2)
Reversing single pass feeder (AR-RP1)
If an original misfeed occurs in the SPF or RSPF, the
copier will stop and the red indicator which indicates an
original misfeed will blink.
copier will stop and the red indicator which indicates an
original misfeed will blink.
1
Open the feeding roller cover and pull the original gently
to the left and out from the document feeder tray. Close
the feeding roller cover.
to the left and out from the document feeder tray. Close
the feeding roller cover.
2
If the misfed original cannot be removed in step 1, open
the right side cover and remove the misfed original.
Close the right side cover.
the right side cover and remove the misfed original.
Close the right side cover.
3
If the misfed original cannot be removed in steps 1 and
2, remove the misfed original from the exit area. Open
the document feeder cover and rotate the roller in the
direction indicated by the arrow if needed. If the misfed
original cannot be easily removed from the exit area,
open the front part of the document feeder tray to
remove the original. With the RSPF, pull out the reversing
tray to remove the misfed original.
2, remove the misfed original from the exit area. Open
the document feeder cover and rotate the roller in the
direction indicated by the arrow if needed. If the misfed
original cannot be easily removed from the exit area,
open the front part of the document feeder tray to
remove the original. With the RSPF, pull out the reversing
tray to remove the misfed original.
With the RSPF, after removing the misfed original from
the exit area, be sure to insert the reversing tray into
the exit area until it locks in place.
the exit area, be sure to insert the reversing tray into
the exit area until it locks in place.
4
Open and close the document feeder cover to cancel the
misfeed location indicator.
misfeed location indicator.
After misfed originals are removed, a number may
appear in the copy quantity display, indicating the
number of originals that must be returned to the
document feeder tray. Return the originals and press
the START key to resume copying.
appear in the copy quantity display, indicating the
number of originals that must be returned to the
document feeder tray. Return the originals and press
the START key to resume copying.
64
OPTIONAL EQUIPMENT
Electronic sorting kit (AR-EB3)
Original
Paper
Copy
Rotation copying
If user program No. 7 is set, the image of the original will rotate when the
orientation of the original does not match that of the copy paper. Rotation
copying will function only if the auto paper select mode or AUTO IMAGE
mode has been selected. Even if user program No. 7 is not set, rotation
copying will function when the 2 in 1 or 4 in 1 function is selected. See page
38. However, if enlargement copying onto a paper size larger than A4 is
performed, the image cannot be rotated.
When this occurs, the detected size and orientation of the original will be
indicated by a steadily lighted indicator and a flashing indicator will show the
required orientation of the original. The original must be rotated 90
orientation of the original does not match that of the copy paper. Rotation
copying will function only if the auto paper select mode or AUTO IMAGE
mode has been selected. Even if user program No. 7 is not set, rotation
copying will function when the 2 in 1 or 4 in 1 function is selected. See page
38. However, if enlargement copying onto a paper size larger than A4 is
performed, the image cannot be rotated.
When this occurs, the detected size and orientation of the original will be
indicated by a steadily lighted indicator and a flashing indicator will show the
required orientation of the original. The original must be rotated 90
°
to match
the flashing indicator to prevent image loss on the copies.
Example: Copying from an A3 original onto A4 paper
ELECTRONIC SORTING KIT (AR-EB3)
If an electronic sorting kit (AR-EB3) is installed, the copier can perform
several additional useful functions. These functions are 2 in 1 and 4 in 1,
erase, margin shift, and sort/group functions. Also, rotation copying can be
performed and a multiple number of originals can be scanned and stored into
the memory. The memory can be expanded by adding commercially available
memories recommended by SHARP. For details, contact your dealer.
several additional useful functions. These functions are 2 in 1 and 4 in 1,
erase, margin shift, and sort/group functions. Also, rotation copying can be
performed and a multiple number of originals can be scanned and stored into
the memory. The memory can be expanded by adding commercially available
memories recommended by SHARP. For details, contact your dealer.
To use the 2 in 1 or 4 in 1 and sort/group functions, an
optional single pass feeder (AR-SP2) or reversing single
pass feeder (AR-RP1) is needed. When installing an
electronic sorting kit, it is recommended to install a single
pass feeder or reversing single pass feeder.
optional single pass feeder (AR-SP2) or reversing single
pass feeder (AR-RP1) is needed. When installing an
electronic sorting kit, it is recommended to install a single
pass feeder or reversing single pass feeder.
65
OPTIONAL EQUIPMENT
Sort/group
If an optional electronic sorting kit is installed, the copier will have two
sorter modes for different copying jobs: one sorts copies into sets matching the sequence
of the originals and the second groups copies by originals.
The sort/group feature cannot be used with the dual page copy feature.
To change the SORT/GROUP mode, press the SORT/GROUP key to select the desired
mode.
sorter modes for different copying jobs: one sorts copies into sets matching the sequence
of the originals and the second groups copies by originals.
The sort/group feature cannot be used with the dual page copy feature.
To change the SORT/GROUP mode, press the SORT/GROUP key to select the desired
mode.
●
The capacity of the paper output tray is 250 sheets (150 sheets if an optional job separator
tray kit (AR-TR2) is installed). When the number of copies output reaches this limit in a
sort or a group copy run, copying will stop, the output tray full (
tray kit (AR-TR2) is installed). When the number of copies output reaches this limit in a
sort or a group copy run, copying will stop, the output tray full (
) indicator will light and
the START key indicator will blink.
Remove the copies from the paper output tray and press the START key to resume
copying.
Remove the copies from the paper output tray and press the START key to resume
copying.
ELECTRONIC SORTING KIT (AR-EB3)
Electronic sorting kit (AR-EB3)
Sort mode
Each set of copies will be sequentially delivered to the
paper output tray.
paper output tray.
Group mode
All copies of the same originals will be grouped in the
paper output tray.
paper output tray.
Offset stack
If the offset stack mode is enabled using user program
No. 19, each copy will be offset by approximately 25 mm.
When copying in the sort mode, each collated set of
copies will be stacked offset from the previous set.
When copying in the group mode, copies will be offset
and stacked in groups of multiple copies from the same
original.
If the offset stack mode is disabled, copies will not be
offset.
The offset stack mode is enabled in the factory default
setting.
No. 19, each copy will be offset by approximately 25 mm.
When copying in the sort mode, each collated set of
copies will be stacked offset from the previous set.
When copying in the group mode, copies will be offset
and stacked in groups of multiple copies from the same
original.
If the offset stack mode is disabled, copies will not be
offset.
The offset stack mode is enabled in the factory default
setting.
1
2
3
1
1
1
1
2
1
Offset mode
1
1
2
3
1
Non-offset mode
1
2
3
3
2
1
3
2
1
3
2
1
1
2
3
3
3
2
3
2
1
1
1
2
66
OPTIONAL EQUIPMENT
Copying in the sort mode
When copying in the sort mode, the original image will be stored in the copier
memory each time an original is scanned and copying will start after all
originals have been scanned. To copy in the sort mode, an optional single pass
feeder (AR-SP2) or reversing single pass feeder (AR-RP1) is needed.
memory each time an original is scanned and copying will start after all
originals have been scanned. To copy in the sort mode, an optional single pass
feeder (AR-SP2) or reversing single pass feeder (AR-RP1) is needed.
1
Set the originals face up in the document feeder tray.
●
The original table cannot be used for sort copying.
2
Press the SORT/GROUP key to select the SORT mode.
3
Ensure that the desired copy paper size is selected.
4
Set the number of copies and press the START key.
●
Copying will start after the originals have been scanned. Up to 30
sheets of originals can be scanned. (If originals are fed continuously
using the stream feeding mode, up to approximately 60 sheets of A4
originals can be scanned. However, when copying originals which
require more memory such as photographs, the number of originals
which can be scanned will be less.) When the memory becomes full of
scanned original image data, the ORIGINAL DATA indicator will
blink.
When the ORIGINAL DATA indicator blinks, the copier will stop
scanning. To start copying of scanned originals, press the START key.
To cancel copying, press the CLEAR or CLEAR ALL key.
sheets of originals can be scanned. (If originals are fed continuously
using the stream feeding mode, up to approximately 60 sheets of A4
originals can be scanned. However, when copying originals which
require more memory such as photographs, the number of originals
which can be scanned will be less.) When the memory becomes full of
scanned original image data, the ORIGINAL DATA indicator will
blink.
When the ORIGINAL DATA indicator blinks, the copier will stop
scanning. To start copying of scanned originals, press the START key.
To cancel copying, press the CLEAR or CLEAR ALL key.
ELECTRONIC SORTING KIT (AR-EB3)
Electronic sorting kit (AR-EB3)
Click on the first or last page to see other AR-205 (serv.man27) service manuals if exist.