DOWNLOAD Sharp AR-205 (serv.man27) Service Manual ↓ Size: 877.6 KB | Pages: 45 in PDF or view online for FREE

Page

●

SYSTEM CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . .  56

●

SINGLE PASS FEEDER (AR-SP2)/
REVERSING SINGLE PASS FEEDER (AR-RP1) . . . . . . . . . . .   57

●

Part names

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  57

●

Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  57

●

Using the SPF or the RSPF

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  58

●

Setting image rotation in duplex copying

. . . . . . . . . . . . . . . . . . .  62

●

Misfeed removal

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  63

●

ELECTRONIC SORTING KIT (AR-EB3) . . . . . . . . . . . . . . . . . .  64

●

Rotation copying

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  64

●

Sort/group

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  65

●

2 in 1 or 4 in 1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  67

●

Erase

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  69

●

Margin shift

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  71

●

250-SHEET PAPER FEED UNIT (AR-DE5)/
2x250-SHEET PAPER FEED UNIT (AR-DE6) . . . . . . . . . . . . . .  72

A number of options are available for the copier which allow you to configure
a copier system to meet your particular needs. The options include the
following.

System configuration

2x250-sheet paper feed unit 
(AR-DE6)

250-sheet paper feed unit 
(AR-DE5)

Platen cover (AR-VR1) 

Electronic sorting kit (AR-EB3)
Facsimile expansion kit (AR-FX2)

*

Printer expansion kit (AR-PB8)

*

PS2 expansion kit (AR-PS1)

*

LCD panel kit (AR-PA1)

*

Job separator tray kit (AR-TR2)

*

Print server card (AR-NC3D)

*

Single pass feeder
(AR-SP2)

Reversing single pass feeder 
(AR-RP1) 

* These options are not used for the copier

operation.

The single pass feeder (SPF) and the reversing single pass feeder (RSPF)
hold up to 30 originals for automatic feeding.
If the RSPF is installed, two-sided originals can be copied automatically
without having to manually turn them over.

Document feeder tray

Feeding roller cover

Right side cover

Original guides

Exit area

Document feeder tray

Feeding roller cover

Original guides

Exit area

AR-SP2

AR-RP1

Reversing tray

As a part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.

Single pass feeder (AR-SP2)

Reversing single pass feeder (AR-RP1)

Acceptable

Weight:

56 to 90 g/m

2

originals

Size:

A5 to A3

Capacity:

Up to 30 sheets provided the total aggregate
thickness does not exceed 4 mm

Power supply

Drawn from the copier

Detectable original

A5, A4, A4R, B4, A3

sizes

Weight

SPF:

Approx. 5.3 kg

RSPF: Approx. 5.5 kg

Dimensions

583 mm (W) x 435 mm (D) x 131 mm (H)

●

Be sure to remove any staples or paper clips from the
originals.

●

Damaged or crumpled originals may misfeed in the SPF
or RSPF. It is recommended that these originals be copied
from the original table.

●

Before placing curled or wavy originals into the document
feeder tray, be sure to flatten them. If not, original misfeeds
may result.

●

For best feeding of originals which have binding holes
punched into them, insert them so that the holes are
positioned to the right or along the side guides. In this case
the settings for margin shift and image rotation may need
to be changed to ensure the images are produced in the
desired orientation. See pages 59 and 71.

●

Special originals such as transparency film and tracing
paper should not be fed through the SPF or RSPF but
should be copied from the original table.

●

The bypass tray and any tray with non-standard size paper
cannot be used in the duplex mode.

●

If the offset stack mode is enabled using user program No.
19, copies will be output in the group mode. Groups of
copies of each original will be offset from the previous
group.

If the stream feeding mode has been enabled using user program
No. 4, the SPF indicator will continue to blink for approximately 5
seconds after feeding of all originals is completed. While this
indicator is blinking, any new originals placed in the SPF or RSPF
will be fed and copied automatically. See page 38, USER
PROGRAMS.

●

The SPF indicator will light up. If this indicator does not light up, the
originals are not properly set, or the SPF or RSPF is not properly
closed.

●

The ORIGINAL SIZE indicator for the detected original size will light
up, and the paper tray with the corresponding paper size will be
automatically selected.

●

The auto paper select function can be disabled using user program No.
8. If this function has been disabled, use the TRAY SELECT key to
select the desired paper tray. See page 38, USER PROGRAMS.

●

To copy onto a different size paper, use the TRAY SELECT key to
make the selection.

●

The bypass tray cannot be automatically selected.

●

When no indicator in the ORIGINAL TO COPY section is lit, the
one-sided to one-sided copying mode is selected.

Single pass feeder (AR-SP2)

Reversing single pass feeder (AR-RP1)