Sharp AR-205 (serv.man27) User Manual / Operation Manual ▷ View online
71
OPTIONAL EQUIPMENT
Margin shift
The MARGIN SHIFT feature automatically shifts the text or image to
increase the margin for binding by approximately 9 mm.
increase the margin for binding by approximately 9 mm.
●
The location of the margin to be increased can be selected to be either at
the left edge or the top of the page. To select the location, see step 2 below.
the left edge or the top of the page. To select the location, see step 2 below.
ELECTRONIC SORTING KIT (AR-EB3)
Expanded margin
Copy
Original
A
A
A
Electronic sorting kit (AR-EB3)
1
Place the original in the document feeder tray or on the
original table.
original table.
●
When copying from the original table and the margin is to be increased
on the left side, set the original face down so that the margin side is
positioned at the right side.
on the left side, set the original face down so that the margin side is
positioned at the right side.
●
If top is selected, set the margin to be expanded to the rear side of the
original table or the document feeder tray.
original table or the document feeder tray.
2
To confirm or set the location of the margin, press and
hold the MARGIN SHIFT key for approximately 5 seconds
until the MARGIN SHIFT indicator will blink.
hold the MARGIN SHIFT key for approximately 5 seconds
until the MARGIN SHIFT indicator will blink.
●
The currently selected number of the margin location will blink in the
copy quantity display.
1: Left
copy quantity display.
1: Left
2: Top
Select the desired parameter using the numeric keys,
and press the START key.
and press the START key.
●
The selected parameter will be steadily lit.
Press the MARGIN SHIFT key.
●
The MARGIN SHIFT indicator will stop blinking.
The location of the margin can be also set using user
program No. 22. See page 38.
program No. 22. See page 38.
3
Press the MARGIN SHIFT key and ensure that the desired
copy paper size is selected.
copy paper size is selected.
4
Set the number of copies and press the START key.
Left margin is expanded here.
72
OPTIONAL EQUIPMENT
Loading copy paper
250-SHEET PAPER FEED UNIT (AR-DE5)
2x250-SHEET PAPER FEED UNIT (AR-DE6)
2x250-SHEET PAPER FEED UNIT (AR-DE6)
These paper feed units provide the convenience of increased paper capacity
for the copier and a greater choice of paper sizes readily available for
copying.
The AR-DE5 contains one 250-sheet paper tray and the AR-DE6 contains
two 250-sheet paper trays.
for the copier and a greater choice of paper sizes readily available for
copying.
The AR-DE5 contains one 250-sheet paper tray and the AR-DE6 contains
two 250-sheet paper trays.
PART NAMES
250-sheet paper feed unit (AR-DE5)
2x250-sheet paper feed unit (AR-DE6)
Trays
Side cover
Side cover
Tray
AR-DE5
AR-DE6
The method of loading copy paper for the paper trays of these paper feed
units is the same as for the paper trays in the copier. See page 10.
The method of changing the copy paper size is also the same for the paper
trays in the copier. See page 11.
units is the same as for the paper trays in the copier. See page 10.
The method of changing the copy paper size is also the same for the paper
trays in the copier. See page 11.
73
OPTIONAL EQUIPMENT
250-SHEET PAPER FEED UNIT (AR-DE5)/2x250-SHEET PAPER FEED UNIT (AR-DE6)
250-sheet paper feed unit (AR-DE5)
2x250-sheet paper feed unit (AR-DE6)
Misfeed removal
The copier will stop when a misfeed occurs. The misfeed (
) indicator and
the red indicator which indicates the paper feed unit will blink.
1
Open the side cover of the paper feed unit and remove
the misfed paper.
the misfed paper.
●
Be sure to perform this step before pulling out the paper trays. If not,
the paper may be torn as the trays are opened.
the paper may be torn as the trays are opened.
2
Gently lift and pull out the paper tray which was in use.
Remove any misfed paper.
Remove any misfed paper.
3
Close the paper tray and the side cover.
●
Confirm that the misfeed (
) indicator has gone out.
74
OPTIONAL EQUIPMENT
250-SHEET PAPER FEED UNIT (AR-DE5)/2x250-SHEET PAPER FEED UNIT (AR-DE6)
250-sheet paper feed unit (AR-DE5)
2x250-sheet paper feed unit (AR-DE6)
AR-DE5
AR-DE6
As a part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
Specifications
Copy paper size
A4 to A3
Paper weight
56 to 80 g/m
2
Paper capacity
One paper tray with capacity for 250 sheets of paper
Weight
Approx. 4.7 kg
Dimensions
590 mm (W) x 471 mm (D) x 88 mm (H)
Power supply
Drawn from the copier
Copy paper size
A4 to A3
Paper weight
56 to 80 g/m
2
Paper capacity
Two paper trays with capacity for 250 sheets of paper
each
each
Weight
Approx. 9.1 kg
Dimensions
590 mm (W) x 471 mm (D) x 173.5 mm (H)
Power supply
Drawn from the copier
Click on the first or last page to see other AR-205 (serv.man27) service manuals if exist.