Sharp AR-205 (serv.man27) User Manual / Operation Manual ▷ View online
59
OPTIONAL EQUIPMENT
SINGLE PASS FEEDER (AR-SP2)/REVERSING SINGLE PASS FEEDER (AR-RP1)
5
Set the number of copies and press the START key.
●
Press the CLEAR key to stop copying in the middle of a run.
Two-sided copies from one-sided originals
1
Ensure that no original is left on the original table.
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
●
If an uneven number of originals are set, the last copy will be one-
sided.
sided.
2
Use the ORIGINAL TO COPY key to select
.
Single pass feeder (AR-SP2)
Reversing single pass feeder (AR-RP1)
The image of every front side can be rotated 180
°
using the image rotation feature. This feature is
useful when the originals and copies are in the
landscape (horizontal) direction and the two-sided
copies are to be read by turning them left to right
rather than top to bottom.
To set this feature, see page 62. This feature can also
be set using user program No. 20.
useful when the originals and copies are in the
landscape (horizontal) direction and the two-sided
copies are to be read by turning them left to right
rather than top to bottom.
To set this feature, see page 62. This feature can also
be set using user program No. 20.
60
OPTIONAL EQUIPMENT
3
Press the START (
) key.
●
For two-sided copying, a multiple number of copies can only be set if
an optional electronic sorting kit is installed.
an optional electronic sorting kit is installed.
Two-sided copies from two-sided originals
To copy in the two-sided to two-sided copy mode, an optional reversing
single pass feeder (AR-RP1) must be installed.
single pass feeder (AR-RP1) must be installed.
1
Ensure that no original is left on the original table.
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
2
Use the ORIGINAL TO COPY key to select
.
●
If this mode is selected, the SPF indicator will light up.
SINGLE PASS FEEDER (AR-SP2)/REVERSING SINGLE PASS FEEDER (AR-RP1)
Single pass feeder (AR-SP2)
Reversing single pass feeder (AR-RP1)
61
OPTIONAL EQUIPMENT
3
Press the START key.
●
For two-sided copying, a multiple number of copies can only be set if
an optional electronic sorting kit is installed.
an optional electronic sorting kit is installed.
●
Be sure not to touch the originals as they move on the reversing tray.
This may cause misfeeds.
This may cause misfeeds.
One-sided copies from two-sided originals
To copy in the two-sided to one-sided copy mode, an optional reversing
single pass feeder (AR-RP1) must be installed.
single pass feeder (AR-RP1) must be installed.
1
Ensure that no original is left on the original table.
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
2
Use the ORIGINAL TO COPY key to select
.
●
If this mode is selected, the SPF indicator will light up.
3
Set the number of copies and press the START key.
●
Press the CLEAR key to stop copying in the middle of a run.
●
Be sure not to touch the originals as they move on the reversing tray.
This may cause misfeeds.
This may cause misfeeds.
SINGLE PASS FEEDER (AR-SP2)/REVERSING SINGLE PASS FEEDER (AR-RP1)
Single pass feeder (AR-SP2)
Reversing single pass feeder (AR-RP1)
The image of every front side can be rotated 180
°
using
image rotation feature. This feature is useful when the
originals and copies are in the landscape (horizontal)
direction.
To set this feature, see page 62. This feature can also
be set using user program No. 20.
originals and copies are in the landscape (horizontal)
direction.
To set this feature, see page 62. This feature can also
be set using user program No. 20.
62
OPTIONAL EQUIPMENT
1
Press and hold down the ORIGINAL TO COPY key for
approximately 5 seconds until the
approximately 5 seconds until the
indicator will
blink and the currently selected parameter number will
blink in the copy quantity display.
blink in the copy quantity display.
2
Select the desired parameter using the numeric keys.
●
0: OFF
1: ON
The factory default setting is 0.
3
Press the START key.
●
The selected parameter will be steadily lit.
4
Press the ORIGINAL TO COPY key.
●
The
indicator will stop blinking.
The image rotation in duplex copying can be also set
using user program No. 20. See page 38.
using user program No. 20. See page 38.
Setting image rotation in duplex copying
SINGLE PASS FEEDER (AR-SP2)/REVERSING SINGLE PASS FEEDER (AR-RP1)
Single pass feeder (AR-SP2)
Reversing single pass feeder (AR-RP1)
Click on the first or last page to see other AR-205 (serv.man27) service manuals if exist.