DOWNLOAD Sharp PN-ZB01 Service Manual ↓ Size: 9.48 MB | Pages: 127 in PDF or view online for FREE

PN-V602　OUTLINE OF THE PRODUCT

 1 – 13

You can display the screens of the PC input signal and AV input signal
simultaneously.

Set this function with “PIP MODES” in the PIP/PbyP menu.

n

The currently selected input signal is displayed on the main screen.

n

You cannot simultaneously display the screens of signals of the same

type, such as two types of PC input signals or two types of AV input
signals.

n

The dual screen display cannot be used with the combination of PC

DVI-D and AV HDMI or of AV DVI-D and PC HDMI.

n

You might infringe on a copyright of the author which is protected

by copyright law when you display the images of the computer
screen and television/VCR simultaneously for profit-making or to

show the image to the public.

n

The screen size for dual-screen display is the same as the

screen size for single-screen display. The Dot by Dot screen is
displayed in “NORMAL” size except when it is set as the PIP

main screen.

n

When dual-screen display is selected, the AUTO INPUT

CHANGE function is disabled.

n

When dual-screen display is selected, the screen cannot be
enlarged.

n

When dual-screen display is selected, the “INPUT SELECT”

options cannot be set.

n

When an interlaced signal (1080i, 480i, video, S-Video) is input to

the sub screen, horizontal lines may flicker. If this happens, dis-
play the image on the main screen.

PIP

A sub screen is displayed 
inside a main screen.

PbyP

A main screen and a sub 
screen are displayed in a 

line.

PbyP2

Displays a main screen 

which measures 1024 pixels 

in the longest direction and a 
sub screen in a line.

Main screen 

Sub 

screen

Main  

screen 

Sub 

screen

Main screen 

Sub 

screen

PN-V602　OUTLINE OF THE PRODUCT

 1 – 14

Even when the screen size is changed, the display may remain the same depending on the input signal.

n

Using this monitor’s screen-size switching or dual-screen display functions to compress or expand the screen for commercial or public viewing
in establishments like cafes or hotels may infringe on the rights of the creators, as protected by Copyright Law, so please be careful.

n

When “Enlarge” is set, the screen size is fixed to “WIDE” mode.

n

When dual-screen display is selected, the screen size cannot be changed.

n

The appearance of the original video may change if you select a screen size with a different aspect ratio than the original image (e.g. TV broad-

cast or video input from external equipment).

n

When an ordinary non-wide image (4:3) is viewed with the whole screen using the screen-size switching function of this monitor, the edge of

the image may be lost or appear distorted. If you wish to respect the creator’s intentions, set the screen size to “NORMAL”.

n

When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen size using the
screen-size switching function of this monitor. With some software, there may be noise or distortion at the edges of the screen. This is due to

the characteristics of the software, and is not a malfunction.

n

Depending on the original image size, black bands may remain at the edges of the screen.

■ ZOOM2 SPECIAL SETTING

If you connect a laptop computer with any of the following screen resolutions and black bands appear around the screen, set “ZOOM2 SPECIAL SET-

TING” of “INPUT SIGNAL” on the OPTION menu to “ON” and then select “ZOOM2” in the SIZE setting.

This displays the area inside the black band.

*

1

This setting is effective only when the screen resolution, including the black band, is one of the resolutions listed above.

*

2

Use the automatic screen adjustment.

WIDE

Displays image so it fills the entire screen.

An image with a 4:3 aspect ratio is stretched to fill 

the entire screen.

ZOOM 1

An image with a 4:3 aspect ratio is enlarged to fill the entire screen without changing the aspect ratio. 

The edges of the image may be cut off.

ZOOM 2

Use this size if ZOOM 1 cuts off the subtitles.

NORMAL

Displays image so it fills the screen without chang-

ing the aspect ratio of the input signals.

Displays the entire image of the aspect ratio of 4:3 

without changing the aspect ratio.

Dot by Dot

Displays the dots of the signals input from the con-
nected PC as the corresponding dots on the 

screen.

Displays the dots of the input signals as the corre-
sponding dots on the screen.

*1

1280 x 800

1280 x 1024

1280 x 960
1400 x 1050 

*2

1280 x 600

1280 x 720

1024 x 600

1024 x 768

PN-V602　OUTLINE OF THE PRODUCT

 1 – 15

n

You can align several monitors and integrate them into a single large screen to display.

n

Up to five monitors can be aligned in both the longest and shortest directions.

n

Each monitor displays enlarged views of separated images.

■ SETTING PROCEDURE

Set using the MULTI menu.

1 ) Set “ENLARGE” to “ON”.

2 ) Select “ADVANCED (ENLARGE)”.

3 ) Set the number of monitors aligned in the horizontal direction in “ENLARGE H”.

4 ) Set the number of monitors aligned in the vertical direction in “ENLARGE V”.

5 ) Set the section of the separated image to be displayed on each monitor in “ENLARGE-POS”.

1 Press 

 .

2 Press 

, 

, 

 or 

 to select position, then press 

.

n

When Enlarge is used, the SCREEN MOTION function is disabled.

n

When Enlarge is used, the AUTO INPUT CHANGE function is disabled.

n

When Enlarge is used, the HDMI AUTO VIEW function is disabled.

Horizontal direction: 2 monitors
Vertical direction: 2 monitors

Horizontal direction: 3 monitors
Vertical direction: 2 monitors

MENU

PN-V602　OUTLINE OF THE PRODUCT

 1 – 16

■ SUPPLIED ACCESSORIES

n

Expansion Board: 1

n

Terminal label: 1

n

Mounting screws: 1

n

Operation manual: 1

n

Speaker cable core: 2

n

Installation Manual (instructions for SHARP dealers and service engineers): 1

■ INSTALLATION PROCEDURE

n

Do not touch the connectors of this product and LCD MONITOR. The static electricity in your body may cause breakdown.

n

Touch a grounded source to discharge the static electricity in your body before starting operation.

n

The illustrations in this manual are for explanatory purposes and may not exactly represent the actual product.

1 ) Set the main power switch of the monitor to “off” and disconnect

the power from the wall outlet.

2 ) Spread a thick and soft cloth (such as a blanket) on a level surface,

such as a table, and place the monitor on it with its LCD panel fac-

ing downward.

3 ) Remove the expansion terminal cover A.

Remove 8 screws.

4 ) Remove the expansion terminal cover B. 

Remove 4 screws.

5 ) Remove the dummy plate.

Remove 8 screws.

Give the dummy plate to the customer and ask them to store it. 

Always install the dummy plate after removing the expansion

board.

6 ) Attach the expansion terminal cover B on the expansion board.

Secure the cover with the 4 screws removed in Step 5.

Apply the screw in order from (1) to (4).

Expansion terminal cover A 

Expansion terminal cover B 

Expansion terminal cover B 

Dummy plate

Expansion terminal cover B 

Expansion terminal 
cover B 

（3）

（4）

（1）

（2）