Sharp PN-R603 (serv.man7) User Manual / Operation Manual ▷ View online
61
E
Specifications
n
DVI-D output terminal pins
(DVI-D 24 pin)
No.
Function
No.
Function
1 TMDS data 2-
13 N.C.
2 TMDS data 2+
14 +5V
3 TMDS data 2/4 shield
15 GND
4 N.C.
16 Hot-plug detection
5 N.C.
17 TMDS data 0-
6 DDC clock
18 TMDS data 0+
7 DDC data
19 TMDS data 0/5 shield
8 N.C.
20 N.C.
9 TMDS data 1-
21 N.C.
10 TMDS data 1+
22 TMDS clock shield
11 TMDS data 1/3 shield
23 TMDS clock+
12 N.C.
24 TMDS clock-
n
DisplayPort output terminal pins
(DisplayPort 20 pin)
No.
Function
No.
Function
1 MainLane 0+
11 Gnd
2 Gnd
12 MainLane 3-
3 MainLane 0-
13 Gnd
4 MainLane 1+
14 Gnd
5 Gnd
15 Aux +
6 MainLane 1-
16 Gnd
7 MainLane 2+
17 Aux -
8 Gnd
18 Hot-plug detection
9 MainLane 2-
19 Gnd
10 MainLane 3+
20 3.3V
n
RS-232C output terminal pins
(D-sub 9 pin)
No.
Function
No.
Function
1 N.C.
6 N.C.
2 Received data
7 N.C.
3 Transmitted data
8 N.C.
4 N.C.
9 N.C.
5 GND
62
E
• When installing, removing or moving the monitor, ensure that this is carried out by at least 3 people.
(PN-R603: at least 2 people.)
• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials
• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials
such as plaster / thin plastic board / wood before starting installation.
• This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the structure.
• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the
thickness of the mounting bracket.
• Do not use an impact driver.
• When moving the monitor, be sure to hold the areas shown in the figure below. Do not hold the LCD panel. This may cause
• When moving the monitor, be sure to hold the areas shown in the figure below. Do not hold the LCD panel. This may cause
product damage, failure, or injury.
• After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.
• Do not use any screw holes other than VESA holes for installation.
• Do not use any screw holes other than VESA holes for installation.
Mounting Precautions
(For SHARP dealers and service engineers)
PN-R703R603 Me EN13A(1)
PN-R703R603 Me EN13A(1)
