IDP 2014 04 03
Date of Issue:
IDP TECHNICAL BULLETIN
Page 1 of 2
Sharp Electronics (UK) Limited
Revision - 1
– Carry out as required
– Carry out as required and whenever the unit comes in for service
– Carry out on all units
Change of frame bottom during production.
We have changed the frame bottom during production from December 2013.
The frame change includes the removal of additional screw holes.
The old and new frames are fully interchangeable and the change is for production
only. The appearance of the screw holes cannot be seen by the customer.
Confirmation of the production date
Using the information provided below, you can identify the production date using the
The first digit is the year. The last digit is the month.
Note - The last digit goes from 0-9, X=October, Y=November and