Sharp PN-R603 (serv.man7) User Manual / Operation Manual ▷ View online
37
E
RS-232C command table
How to read the command table
Command:
Command field (See page 33.)
Direction:
W When the “Parameter” is set in the parameter field (see page 33), the command functions as described
under “Control/Response Contents”.
R The returned value indicated under “Reply” can be obtained by setting “????”, “
?” or “???+”
(repeater control) in the parameter field (see page 33).
Parameter:
Parameter field (See page 33.)
Reply:
Response (Returned value)
* :
“●” indicates a command which can be used in power standby mode regardless of the STANDBY MODE setting.
“○” indicates a command which cannot be used in power standby mode when STANDBY MODE is set to LOW POWER.
“–” indicates a command which cannot be used in power standby mode regardless of the STANDBY MODE setting.
Power control/Input mode selection
Function
Command Direction
Parameter
Reply
Control/Response contents
*
POWER CONTROL
POWR
W
0
Switches to standby mode.
●
1
Returns from standby mode.
R
0 Standby mode
1 Normal mode
2 Input signal waiting mode
1 Normal mode
2 Input signal waiting mode
INPUT MODE SELECTION
INPS
W
0
Toggle change for input mode. Terminals not selected in INPUT SELECT cannot
be selected.
●
1
DVI-I
2
D-SUB[RGB]
“ERR” when other than RGB is selected for D-SUB of INPUT SELECT.
3
D-SUB[COMPONENT]
“ERR” when other than COMPONENT is selected for D-SUB of INPUT SELECT.
4
D-SUB[VIDEO]
“ERR” when other than VIDEO is selected for D-SUB of INPUT SELECT.
9
HDMI1[AV]
“ERR” when PC is selected for HDMI1 of INPUT SELECT.
10
HDMI1[PC]
“ERR” when AV is selected for HDMI1 of INPUT SELECT.
12
HDMI2[AV]
“ERR” when PC is selected for HDMI2 of INPUT SELECT.
13
HDMI2[PC]
“ERR” when AV is selected for HDMI2 of INPUT SELECT.
14
DisplayPort
R
1 DVI-I
●
2 D-SUB[RGB]
3 D-SUB[COMPONENT]
4 D-SUB[VIDEO]
9 HDMI1[AV]
3 D-SUB[COMPONENT]
4 D-SUB[VIDEO]
9 HDMI1[AV]
10 HDMI1[PC]
12 HDMI2[AV]
13 HDMI2[PC]
14 DisplayPort
12 HDMI2[AV]
13 HDMI2[PC]
14 DisplayPort
Controlling the Monitor with a PC (RS-232C)
38
E
SCREEN menu
Function
Command Direction
Parameter
Reply
Control/Response contents
*
AUTO
ASNC
W
1
When the input mode is D-SUB[RGB], DVI-I (analog).
-
CLOCK
CLCK
WR
0-1200
0-1200 When the input mode is D-SUB[RGB], DVI-I (analog).
Varies depending on the signal.
PHASE
PHSE
WR
0-63
0-63 When the input mode is D-SUB[RGB], DVI-I (analog).
POSITIONING
POSITION OF
THE LONGEST
DIRECTION
HPOS
WR
0-100
0-100 0-800 on D-SUB[RGB], DVI-I (analog).
Varies depending on the signal.
POSITION OF
THE SHORTEST
DIRECTION
VPOS
WR
0-100
0-100 0-200 on D-SUB[RGB], DVI-I (analog).
Varies depending on the signal.
SIZE
SIZE OF THE
LONGEST
DIRECTION
HSIZ
WR
0-100
0-100
SIZE OF THE
SHORTEST
DIRECTION
VSIZ
WR
0-100
0-100
RESOLUTION
LONGEST
DIRECTION
RESOLUTION
HRES
WR
300-1920
300-1920 When the input mode is D-SUB[RGB], DVI-I (analog).
Only even numbers are valid for parameters.
Varies depending on the signal.
SHORTEST
DIRECTION
RESOLUTION
VRES
WR
200-1200
200-1200
RESET
ARST
W
1
PICTURE menu
Function
Command Direction
Parameter
Reply
Control/Response contents
*
BRIGHT
VLMP
WR
0-31
0-31
○
CONTRAST
CONT
WR
0-60
0-60
BLACK LEVEL
BLVL
WR
0-60
0-60
TINT
TINT
WR
0-60
0-60
COLORS
COLR
WR
0-60
0-60
SHARPNESS
SHRP
WR
0-24
0-24
COLOR
ADJUSTMENT
COLOR MODE
BMOD
WR
0
0 STD
○
2
2 VIVID
3
3 sRGB (When the input mode is PC)
4
4 HIGH ILLUMINANCE
WHITE
BALANCE
THRU
CTMP
WR
0
0 PC input
PRESET
1-18
1-18 From 1: approximately 3,000K to 15: approximately 10,000K (500K steps)
16: approximately 5,600K, 17: approximately 9,300K, 18: approximately 3,200K
USER
99
99
R-CONTRAST
CRTR
WR
0-256
0-256 “ERR” when CTMP is not set to 99.
G-CONTRAST
CRTG
WR
0-256
0-256
B-CONTRAST
CRTB
WR
0-256
0-256
R-OFFSET
OFSR
WR
-127-127
-127-127
G-OFFSET
OFSG
WR
-127-127
-127-127
B-OFFSET
OFSB
WR
-127-127
-127-127
COPY TO USER
CPTU
W
0
Copies a preset value to the user setting.
-
GAMMA
GAMM
WR
0-2
0-2 0: 1.8, 1: 2.2, 2: 2.4 (during PC input)
0: LIGHT 2, 2: DARK (during AV input)
○
4-6
4-6 4: USER, 5: 2.0, 6: STD (during PC input)
4: USER, 5: LIGHT 1, 6: STD (during AV input)
FLESH TONE (AV input)
FLES
WR
0-2
0-2 0: OFF, 1: LOW, 2: HIGH
C.M.S.-HUE (AV input)
CMHR
WR
-10-10
-10-10 R
CMHY
Y
CMHG
G
CMHC
C
CMHB
B
CMHM
M
CRST
W
1
Resets the hue.
C.M.S.-SATURATION
(AV input)
CMSR
WR
-10-10
-10-10 R
CMSY
Y
CMSG
G
CMSC
C
CMSB
B
CMSM
M
CRST
W
2
Resets the saturation.
C.M.S.-VALUE (AV input)
CMVR
WR
-10-10
-10-10 R
CMVY
Y
CMVG
G
CMVC
C
CMVB
B
CMVM
M
CRST
W
3
Resets the brightness.
Controlling the Monitor with a PC (RS-232C)
39
E
Function
Command Direction
Parameter
Reply
Control/Response contents
*
ADVANCED
AUTO
AGIN
W
1
When the input mode is D-SUB[RGB], DVI-I (analog).
-
ANALOG GAIN
ANGA
WR
0-127
0-127 When the input mode is D-SUB[RGB], DVI-I (analog).
○
ANALOG OFFSET
ANOF
WR
0-127
0-127 When the input mode is D-SUB[RGB], DVI-I (analog).
3D-NR (AV input)
TDNR
WR
0-2
0-2 0: OFF, 1: LOW, 2: HIGH
MPEG-NR (AV input)
MPNR
WR
0-1
0-1 0: OFF, 1: ON
3D-Y/C
YCSP
WR
0-1
0-1 0: OFF, 1: ON (When the input mode is D-SUB[VIDEO])
RGB INPUT RANGE
(HDMI1[AV])
AHDR
WR
0-2
0-2 0: AUTO, 1: FULL, 2: LIMITED
RGB INPUT RANGE
(HDMI1[PC])
PHDR
WR
0-2
0-2 0: AUTO, 1: FULL, 2: LIMITED
RGB INPUT RANGE
(HDMI2[AV])
AH2R
WR
0-2
0-2 0: AUTO, 1: FULL, 2: LIMITED
RGB INPUT RANGE
(HDMI2[PC])
PH2R
WR
0-2
0-2 0: AUTO, 1: FULL, 2: LIMITED
RGB INPUT RANGE
(DVI-I)
PDVR
WR
1-2
1-2 1: FULL, 2: LIMITED
RGB INPUT RANGE
(D-SUB)
PDSR
WR
1-2
1-2 1: FULL, 2: LIMITED
RGB INPUT RANGE
(DisplayPort)
PDPR
WR
0-2
0-2 0: AUTO, 1: FULL, 2: LIMITED
ACTIVE CONTRAST (AV input) ACNT
WR
0-1
0-1 0: OFF, 1: ON
DISPLAY COLOR PATTERN
PTDF
WR
0
0 No pattern display.
1
1 White single color pattern display.
2
2 Red single color pattern display.
3
3 Green single color pattern display.
4
4 Blue single color pattern display.
99
99 Red/green/blue mixed color pattern display.
Set each color's level with RED, GREEN, BLUE.
DISPLAY COLOR PATTERN (R) PTDR
WR
0-15
0-15 “ERR” when PTDF is not set to 99.
DISPLAY COLOR PATTERN (G) PTDG
WR
0-15
0-15
DISPLAY COLOR PATTERN (B) PTDB
WR
0-15
0-15
RESET
ARST
W
2
-
AUDIO menu
Function
Command Direction
Parameter
Reply
Control/Response contents
*
TREBLE
AUTR
WR
-5-5
-5-5
○
BASS
AUBS
WR
-5-5
-5-5
BALANCE
AUBL
WR
-10-10
-10-10
RESET
ARST
W
3
-
Controlling the Monitor with a PC (RS-232C)
40
E
SETUP menu
Function
Command Direction
Parameter
Reply
Control/Response contents
*
DATE/TIME SETTING
DATE
WR
AABBCCDDEE
AABBCCDDEE
AA: Year, BB: Month, CC: Day, DD: Hour, EE: Minute
○
DATE DISPLAY FORMAT
DTFT
WR
0-2
0-2 0: YYYY/MM/DD, 1: MM/DD/YYYY, 2: DD/MM/YYYY
YYYY: Year, MM: Month, DD: Day
TIME DISPLAY FORMAT
TMFT
WR
0-1
0-1 0: 24-HOUR TIME, 1: 12-HOUR TIME
SCHEDULE
SC01-
SC08
SC08
WR
ABCDEFFGGH
ABCDEFFGGH
Schedule of a specified number
A: Schedule
0= Not effective, 1 = Effective
B: Power
0 = OFF, 1 = ON
C: Day of the week 1 0 = Only once, 1 = Every week, 2 = Every day
D: Day of the week 2 0 = Sunday, 1 = Monday through 6 = Saturday,
9 = Not exist
E: Day of the week 3 0 = Sunday, 1 = Monday through 6 = Saturday,
9 = Not exist
F: Hour
00-23
G: Minute
00-59
H: Input
0 = Not specified, 1 = DVI-I, 2 = DisplayPort,
3 = HDMI1, 4 = HDMI2, 5 = D-SUB
“ERR” when LOW POWER is selected for STANDBY MODE.
SCHEDULE BRIGHTNESS
SB01-
SB08
SB08
WR
0-31
0-31 Screen brightness to change
99
99 Disable brightness setting
LANGUAGE
LANG
WR
14
14 ENGLISH
1
1 DEUTSCH
2
2 FRANÇAIS
3
3 ITALIANO
4
4 ESPAÑOL
5
5 РУССКИЙ
6
6
INPUT SELECT
HDMI1
HDSL
WR
0-1
0-1 0:PC 1:AV
○
HDMI2
H2SL
WR
0-1
0-1 0:PC 1:AV
D-SUB
SLDS
WR
0-2
0-2 0:RGB 1:COMPONENT 2:VIDEO
HDMI1 AUTO VIEW HDAW
WR
0-1
0-1 0: OFF, 1: ON
HDMI2 AUTO VIEW H2AW
WR
0-1
0-1 0: OFF, 1: ON
HOT PLUG
CONTROL (DVI-I)
HPCT
WR
0-1
0-1 0: OFF, 1: ON
HOT PLUG
CONTROL (HDMI1)
HPCH
WR
0-1
0-1 0: OFF, 1: ON
HOT PLUG
CONTROL (HDMI2)
HPH2
WR
0-1
0-1 0: OFF, 1: ON
EDID SELECT
(DVI-I)
DVED
WR
0-2
0-2 0: AUTO, 1: DIGITAL, 2: ANALOG
AUDIO SELECT
DVI-I
ASDP
WR
1-2
1-2 1: AUDIO1, 2: AUDIO2
○
D-SUB[RGB]
ASAP
WR
1-2
1-2 1: AUDIO1, 2: AUDIO2
HDMI1[PC]
ASHP
WR
0-2
0-2 0: HDMI, 1: AUDIO1, 2: AUDIO2
HDMI1[AV]
ASHA
WR
0-2
0-2 0: HDMI, 1: AUDIO1, 2: AUDIO2
HDMI2[PC]
AH2P
WR
0-2
0-2 0: HDMI, 1: AUDIO1, 2: AUDIO2
HDMI2[AV]
AH2A
WR
0-2
0-2 0: HDMI, 1: AUDIO1, 2: AUDIO2
D-SUB[COMPONENT] ASC2
WR
1-2
1-2 1: AUDIO1, 2: AUDIO2
D-SUB[VIDEO]
ASV2
WR
1-2
1-2 1: AUDIO1, 2: AUDIO2
DisplayPort
ASDI
WR
1-3
1-3 1: AUDIO1, 2: AUDIO2, 3: DisplayPort
AUDIO OPTION
AUDIO OUTPUT
AOUT
WR
0-2
0-2 0: VARIABLE1, 1: FIXED, 2: VARIABLE2
○
AUDIO INPUT
LEVEL1
AIVP
WR
0-1
0-1 0: 1.0Vrms, 1: 0.5Vrms
AUDIO INPUT
LEVEL2
AIV2
WR
0-1
0-1 0: 1.0Vrms, 1: 0.5Vrms
MONAURAL
AUDIO
MONO
WR
0-1
0-1 0: OFF, 1: ON
COMMUNICATION
SETTING
RS-232C/LAN
SELECT
CTLS
WR
0-1
0-1 0: RS-232C 1: LAN
○
BAUD RATE
BAUD
WR
0-2
0-2 0: 9600bps, 1: 19200bps, 2: 38400bps
ID SETTING
ID NO.SETTING
IDST
W
0-255
Sets the monitor’s ID number. (“0” means “no ID number”.)
○
R
0-255 Returns the monitor’s ID number.
ID NO. SETTING
(ONCE)
IDSL
W
1-255
Sets a monitor ID number.
This ID number is only effective for the command immediately after this
command.
0
Clears the ID number if one has been designated.
ID NO. SETTING
(SUBSEQUENT)
IDLK
W
1-255
Sets a monitor ID number.
This ID number is effective for the next and all subsequent commands after this
command.
0
Clears the ID number if one has been designated.
ID CHECK
IDCK
W
0 ID
: xxx
IDLK : yyy
Displays monitor’s own ID number and the selected ID number on the screen.
ID DISPLAY
IDDP
W
0-2
0: OFF, 1: ON, 2: ON (turns OFF after 4 sec.)
(The IP address and MAC address are both displayed.)
-
COPY SETTING
VALUE
SETTING COPY
MODE
CPMD
WR
0
0 Copy to all monitors.
○
1-255
1-255 Copy to the monitor with the set ID Number.
SETTING COPY
TARGET
CPTG
WR
0
0 Copies the PICTURE menu settings.
1
1 Copies all the settings.
Controlling the Monitor with a PC (RS-232C)
Click on the first or last page to see other PN-R603 (serv.man7) service manuals if exist.