Sharp PN-R603 (serv.man5) Service Manual ▷ View online
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-R903/R703/R603 OUTLINE OF THE PRODUCT
1 – 5
1 - 8. SUPPLIED COMPONENTS
・ Liquid Crystal Display Monitor: 1
・ Remote control unit: 1
・ Cable clamp: 3(PN-R903), 2(PN-R703/R603)
・ Power cord: 1
・ R-6 battery (“AA” size): 2
・ CD-ROM (Utility Disk for Windows): 1
・ Setup Manual: 1
・ Vertical sticker (Logo): 1
・ Vertical sticker (Operation panel): 1
・ Cover SHARP logo: 1
Place the sticker onto the SHARP logo to cover the logo
・ Cover: 2 (PN-R903)
・ Cover screws: 4 (PN-R903)
・ Screw masking sheet: 4 (PN-R903)
・ Cable clamp (stick-on): 2 (PN-R703/R603 North America model)
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-R903/R703/R603 OUTLINE OF THE PRODUCT
1 – 6
1 - 9. LAYOUT OF TERMINAL PINS
■ DVI-I INPUT TERMINAL PINS
■ RS-232C INPUT TERMINAL PINS
■ RS-232C OUTPUT TERMINAL PINS
■ PC/AV D-SUB INPUT TERMINAL PINS
■ DVI-D OUTPUT TERMINAL PINS
■ PC/AV HDMI INPUT TERMINAL PINS
No.
Function
No.
Function
1
TMDS data 2-
16
Hot-plug detection
2
TMDS data 2+
17
TMDS data 0-
3
TMDS data 2/4 shield
18
TMDS data 0+
4
N.C.
19
TMDS data 0/5 shield
5
N.C.
20
N.C.
6
DDC clock
21
N.C.
7
DDC data
22
TMDS clock shield
8
Analog Vsync signal
23
TMDS clock+
9
TMDS data 1-
24
TMDS clock-
10
TMDS data 1+
C1
Analog red video signal
11
TMDS data 1/3 shield
C2
Analog green video sig-
nal
nal
12
N.C.
C3
Analog blue video signal
13
N.C.
C4
Analog Hsync signal
14
+5V
C5
Analog GND
15
GND
No.
Function
No.
Function
1
N.C.
6
N.C.
2
Transmitted data
7
N.C.
3
Received data
8
N.C.
4
N.C.
9
N.C.
5
GND
No.
Function
No.
Function
1
N.C.
6
N.C.
2
Received data
7
N.C.
3
Transmitted data
8
N.C.
4
N.C.
9
N.C.
5
GND
No.
Function
No.
Function
1
Red video signal input
9
+5V
2
Green video signal input
10
GND
3
Blue video signal input
11
N.C.
4
N.C.
12
DDC data
5
GND
13
Hsync signal input
6
GND for red video signal
14
Vsync signal input
7
GND for green video signal
15
DDC clock
8
GND for blue video signal
No.
Function
No.
Function
1
TMDS data 2-
13
N.C.
2
TMDS data 2+
14
+5V
3
TMDS data 2/4 shield
15
GND
4
N.C.
16
Hot-plug detection
5
N.C.
17
TMDS data 0-
6
DDC clock
18
TMDS data 0+
7
DDC data
19
TMDS data 0/5 shield
8
N.C.
20
N.C.
9
TMDS data 1-
21
N.C.
10
TMDS data 1+
22
TMDS clock shield
11
TMDS data 1/3 shield
23
TMDS clock+
12
N.C.
24
TMDS clock-
No.
Function
No.
Function
1
TMDS data 2+
11
TMDS clock shield
2
TMDS data 2 shield
12
TMDS clock-
3
TMDS data 2-
13
CEC
4
TMDS data 1+
14
N.C.
5
TMDS data 1 shield
15
SCL
6
TMDS data 1-
16
SDA
7
TMDS data 0+
17
DDC/CEC GND
8
TMDS data 0 shield
18
+5V
9
TMDS data 0-
19
Hot-plug detection
10
TMDS clock+
PN-R903/R703/R603 OUTLINE OF THE PRODUCT
1 – 7
■ DISPLAYPORT INPUT TERMINAL PINS
■ DISPLAYPORT OUTPUT TERMINAL PINS
No.
Function
No.
Function
1
MainLane 3-
13
Gnd
2
GND
14
MainLane 0+
3
MainLane 3+
15
GND
4
MainLane 2-
16
GND
5
GND
17
Aux +
6
MainLane 2+
18
Gnd
7
MainLane 1-
19
Aux -
8
GND
20
Hot-Plug detection
9
MainLane 1+
21
GND
10
MainLane 1-
22
3.3V
No.
Function
No.
Function
1
MainLane 0-
13
GND
2
GND
14
MainLane 3-
3
MainLane 0-
15
GND
4
MainLane 1+
16
GND
5
GND
17
Aux +
6
MainLane 1-
18
GND
7
MainLane 2+
19
Aux -
8
GND
20
Hot-Plug detection
9
MainLane 2-
21
GND
10
MainLane 3+
22
3.3V
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-R903/R703/R603 OUTLINE OF THE PRODUCT
1 – 8
2. PART NAMES AND FUNCTION
2 - 1. DISPLAY
■ FRONT VIEW
<PN-R903>
<PN-R703/R603>
REFERENCE CHART OF POWER LED5 LIGHTING STATUS
(Only PN-R703/R603)
n
When switching the main power switch or the POWER button off
and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.
and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.
MEMO
n
When the main power switch is off, the monitor cannot be turned
on.
on.
n
If the monitor is in the input signal standby mode and you press
the POWER button on the remote control unit, the monitor enters
standby mode.
the POWER button on the remote control unit, the monitor enters
standby mode.
n
Setting the SCHEDULE flashes the power LED alternately in red
and orange in standby mode.
and orange in standby mode.
n
To disable the logo screen from displaying when turning the
power ON, set LOGO SCREEN to OFF on the SETUP menu.
power ON, set LOGO SCREEN to OFF on the SETUP menu.
1
LCD panel
2
Remote control sensor
3
Input switch
4
Power switch
5
Power LED
Lighting Status
Status Description
Green lit.
Power on
Orange lit.
Power off (Standby mode)
Green flashing.
Input signal waiting mode
Click on the first or last page to see other PN-R603 (serv.man5) service manuals if exist.