DOWNLOAD Sharp PN-K321 (serv.man3) Service Manual ↓ Size: 23.33 MB | Pages: 127 in PDF or view online for FREE

Model
PN-K321 (serv.man3)
Pages
127
Size
23.33 MB
Type
PDF
Document
Service Manual
Brand
Device
Monitor
File
pn-k321-sm3.pdf
Date

Sharp PN-K321 (serv.man3) Service Manual ▷ View online

PN-K321/K322B  OUTLINE OF THE PRODUCT      1 - 3 
 
PN-K322B 
■Landscape
 
 
■Portrait 
 
When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible(200x200pitch) 
mounting method. 
SHARP recommends using M6 screws and tighten the screws. 
Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in 
serious personal injuries as well as damage to the product. The screw and hole should come together with over 5/16 inch (8 
mm) length of thread. Use a bracket which has been approved for UL1678 standard, and which can endure at least 4 times 
or more the weight of the monitor.
 
PN-K321/K322B  OUTLINE OF THE PRODUCT      1 - 4 
 
1 – 3.Compatible signal timing (PC) 
Screen resolution 
Vsync 
VESA 
640×480 
60Hz 
72Hz 
75Hz 
800×600 
56Hz 
60Hz 
72Hz 
75Hz 
848×480 60Hz 
1024×768 
60Hz 
70Hz 
75Hz 
1152×864 75Hz 
1280×768 
60Hz 
75Hz 
1280×800 60Hz 
1280×960 60Hz 
1280×1024 
60Hz 
75Hz 
1360×768 60Hz 
1400×1050 60Hz 
*1 A single screen is created from simultaneous input of two systems using HDMI1 and HDMI2. 
*2    Displays a reduced image, except in Dot by Dot. In Dot by Dot, the image will be cut down to panel size then displayed. 
*3  Displays using multi-streaming. 
*4 The two HDMI input terminals both have 1920 x 2160 signals. 
*5 The two HDMI input terminals both have 2048 x 2160 signals. 
*6 The signals for the left and right screens are both 1920 x 2160 signals. 
*      All are compliant only with non-interlaced. 
*      Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input. 
PN-K321/K322B  OUTLINE OF THE PRODUCT      1 - 5 
 
1 – 4.Compatible signal timing (AV) 
Screen 
resolution 
Frequency HDMI 
1920 × 1080p 
60Hz 
Yes 
1920 × 1080i 
24Hz 
Yes 
25Hz 
Yes 
30Hz 
Yes 
50Hz 
Yes 
60Hz 
Yes 
1280 × 720p 
24Hz 
Yes 
720 × 576p 
60Hz 
Yes 
720 × 480p 
60Hz 
Yes 
640 × 480p(VGA) 
70Hz 
Yes 
720(1440) × 576i 
60Hz 
Yes 
720(1440) × 480i 
24Hz 
Yes 
 
1 – 5.Power management 
This monitor conforms to VESA DisplayPort power management. 
 
1 – 6.DDC(plug and play) 
The monitor supports the VESA DDC (Display Data Channel) standard. 
DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters is 
exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play 
monitors. 
There are several types of DDC, depending on the communication method used. This monitor supports DDC2B. 
PN-K321/K322B  OUTLINE OF THE PRODUCT      1 - 6 
 
1 – 7.SUPPLIED COMPONENTS
PN-K321/K321H 
  Liquid Crystal Display Monitor: 1 
  Power cord: 1(About 2m) 
  AC adapter: 1 
  CD-ROM (Utility Disk for Windows): 1 
 Setup Manual: 1 
  DisplayPort cable: 1(About 2m) 
  RS232C conversion cable (Φ3.5 mini-jack): 1 
  Pedestal (for stand): 1 
  Strut (for stand): 1 
  Attachment plate (for stand): 1 (preinstalled on monitor) 
  Countersunk screws (M4 x 6 without washers): 5 
  Screws (M4 x 10 with washers): 4 
 Hex wrench: 1 
  Cable clamp: 2 
  Cable clamp (small): 1 
  Cable clamp (large): 2 
  Vertical sticker (Logo): 1 
  Vertical sticker (Operation buttons): 1 
  Vertical sticker (Blank): 1 
  Horizontal sticker (Operation buttons): 1 
  Cover Sharp logo: 1 
Place this sticker onto the SHARP logo to cover the logo 
PN-K322B
 
  Liquid Crystal Display Monitor: 1 
  Touch pen: 1 
  Cable cover: 1 
  Power cord: 1(About 2m) 
  AC adapter: 1 
  CD-ROM (Utility Disk for Windows): 1 
  Setup Manual: 1 
  DisplayPort cable: 1(About 2m) 
  RS-232C conversion cable (Φ3.5 mini-jack): 1 
  USB cable (for touch panel, miniB): 1 
  Cable clamp: 2 
  Cable clamp (small): 1 
  Cable clamp (large): 3 
  Anti-toppling clamp: 2 
  Screws (for anti-toppling) (M4 x 10): 2 
  Vertical sticker (Logo): 1 
  Vertical sticker (Operation buttons): 1 
  Vertical sticker (Blank): 1 
  Horizontal sticker (Operation buttons): 1 
  Cover Sharp logo: 1 
Place this sticker onto the SHARP logo to cover the logo. 
*  Sharp  Corporation  holds  authorship  rights  to  the  Utility  Disk 
program. Do not reproduce it without permission.
 
: ’13/Dec 
Page of 127
Display

Click on the first or last page to see other PN-K321 (serv.man3) service manuals if exist.