Sharp PN-E802 (serv.man3) Service Manual ▷ View online
PN-E802/E702/E602 OUTLINE OF THE PRODUCT
1 – 1
CHAPTER 1. OUTLINE OF THE PRODUCT
1. SPECIFICATIONS
1 - 1. OUTLINE
Model
PN-E802
PN-E702
PN-E602
LCD component
80” Class [80 inch
(203.2cm) diagonal]
TFT LCD
TFT LCD
70” Class [69-1/2 inch
(176.6cm) diagonal]
TFT LCD
TFT LCD
60” Class [60-1/16 inch
(152.5cm) diagonal]
TFT LCD
TFT LCD
Max. resolution (pixels)
1920 x 1080
Max. colors
Approx. 1.06 billion colors
Pixel pitch (H) x (V)
0.923 mm x 0.923 mm
0.802 mm x 0.802 mm
0.692 mm x 0.692 mm
Viewing angle
176° right/left/up/down (contrast ratio>10)
Screen active area inch (mm)
69-3/4 x 39-1/4
(1771.2 x 996.3)
(1771.2 x 996.3)
60-9/16 x 34-1/16
(1538.9 x 865.6)
(1538.9 x 865.6)
52-5/16 x 29-7/16
(1329.1 x 747.6)
(1329.1 x 747.6)
Computer input signal
n
Digital (DVI 1.0 standard-compliant)
n
Analog RGB (0.7 Vp-p) [75
Ω]
Sync signal
n
Horizontal/vertical separate (TTL: positive/negative)
n
Sync-on-green
n
Composite sync (TTL: positive/negative)
Video color system
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play
VESA DDC2B
Power management
n
VESA DPMS
n
DVI DMPM
Input terminals
PC/AV
Digital
HDMI x 1
PC
Analog
Mini D-SUB 15 pin, 3 rows x 1
Audio
3.5 mm mini stereo jack x 1
Serial (RS-232C)
D-SUB 9 pin x 1
When PN-ZB01
(optional) is attached
(optional) is attached
PC/AV
Digital
DVI-D 24 pin (HDCP compatible) x 1
PC
Analog
BNC
*1*2
x 1
AV
Composite video
BNC x 1
S-video
x 1
Component
BNC (Y, Cb/Pb, Cr/Pr)
*1
x 1
Audio
RCA pin (L/R) x 2
Output terminals
Audio
RCA pin (L/R) x 1
Serial (RS-232C)
D-SUB 9 pin x 1
When PN-ZB01
(optional) is attached
(optional) is attached
PC/AV
Digital
DVI-D 24 pin x 1
External speaker
7 W + 7 W [6
Ω]
LAN terminal [When PN-ZB01 (optional) is
attached]
attached]
10 BASE-T/100 BASE-TX
Speaker output
7 W + 7 W
Power requirement
AC100 V - 240 V, 3.1 A,
50/60 Hz
50/60 Hz
AC100 V - 240 V, 2.8 A,
50/60 Hz
50/60 Hz
AC100 V - 240 V, 2.0 A,
50/60 Hz
50/60 Hz
Operating temperature
*3
32°F to 104°F (0°C to 40°C)
Operating humidity
20% to 80% (no condensation)
Power consumption (maximum/input signal wait-
ing mode
*4
/standby mode
*5
)
265 W/1.0 W/1.0 W
235 W/1.0 W/1.0 W
165 W/1.0 W/1.0 W
When PN-ZB01 (optional) is attached
270W
240 W
170 W
Dimensions (excluding protrusions) inch (mm)
Approx. 73-9/16 (W) x
4-13/16 (D) x 43-1/16 (H)
(1869 x 123 x 1094)
Approx. 63-9/16 (W) x
3-15/16 (D) x 37-5/16 (H)
(1,615 x 100 x 947)
Approx. 55-3/8 (W) x
3-3/8 (D) x 32-3/16 (H)
(1,407 x 86 x 817)
Weight lbs. (kg)
Approx. 174.2 (79)
Approx. 110.2 (50)
Approx. 83.8 (38)
PN-ZB01 (optional)
Approx. 1.102 (0.5)
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-E802/E702/E602 OUTLINE OF THE PRODUCT
1 – 2
*
1
Cannot be used simultaneously.
*
2
Does not support plug and play.
*
3
Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified by the optional equipments.
In such cases, please check the temperature condition specified by the optional equipments.
*
4
When “AUTO INPUT CHANGE” is set to “OFF”.
*
5
When “STANDBY MODE” is set to “STANDARD”. When “STANDBY MODE” is set to “LOW POWER”: 0.5W
1 - 2. DIMENSIONAL DRAWINGS
■ PN-E802
■ PN-E702
VESA
holes
holes
Unit: inch [mm]
70-11/16 [1795]
73-9/16 [1869]
4-13/16
[123]
[123]
2-3/4
[70]
[70]
1-15/16
[49]
[49]
43-1/16 [10
9
4]
1-15/16
[49]
[49]
Opening width (70 [1778])
Opening height
(3
9
-1/2 [1004])
7-7/8
[200]
[200]
7-7/8
[200]
[200]
3-15/16
[100]
[100]
3-15/16
[100]
[100]
7-7/8 [200]
63-9/16 [1615]
Opening width (60-13/16 [1545])
59-9/16 [1513]
Opening height
(34-1/4 [870])
37-5/16 [
9
47]
7-7/8 [200]
3-15/16
[100]
[100]
3
[76.5]
[76.5]
1-15/16
[50]
[50]
7-7/8
[200]
[200]
7-7/8
[200]
[200]
VESA
holes
holes
3-15/16
[100]
[100]
1-11/16
[43.5]
[43.5]
Unit: inch [mm]
3-15/16
[100]
[100]
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-E802/E702/E602 OUTLINE OF THE PRODUCT
1 – 3
■ PN-E602
*
Note that the values shown are approximate values.
When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method.
SHARP recommends using M6 screws and tighten the screws.
Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in serious personal injuries as
Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in serious personal injuries as
well as damage to the product. The screw and hole should come together with over 5/16 inch (8 mm) length of thread. Use a bracket which has been
approved for UL1678 standard, and which can endure at least 4 times or more the weight of the monitor.
VESA
holes
holes
7-7/8 [200]
7-7/8
[200]
[200]
7-7/8
[200]
[200]
3-15/16
[100]
[100]
3-15/16
[100]
[100]
Opening height
(2
9
-5/8 [753])
Opening width (52-1/2 [1334])
55-3/8 [1407]
51-1/8 [1298]
32-3/16 [817]
3-3/8
[86]
[86]
2-7/16
[62]
[62]
1-3/4
[44]
[44]
1-15/16
[50]
[50]
Unit: inch [mm]
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-E802/E702/E602 OUTLINE OF THE PRODUCT
1 – 4
1 - 3. COMPATIBLE SIGNAL TIMING (PC)
*
1
Displays a reduced image, except in Dot by Dot. In Dot by Dot, the image will be cut down to panel size then displayed.
*
2
Available when the PN-ZB01 (optional) is attached.
*
All are compliant only with non-interlaced.
*
Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input.
*
The frequency values for the Sun are reference values.
Screen resolution
Hsync
Vsync
Dot frequency
Digital
Analog
(D-SUB/RGB
*2
)
DVI
*2
HDMI
VESA
640 x 480
31.5kHz
60Hz
25.175MHz
Yes
Yes
Yes
37.9kHz
72Hz 31.5MHz Yes
Yes
Yes
37.5kHz
75Hz 31.5MHz Yes
Yes
Yes
800 x 600
35.1kHz
56Hz
36.0MHz
---
---
Yes
37.9kHz
60Hz 40.0MHz Yes
Yes
Yes
48.1kHz
72Hz 50.0MHz Yes
Yes
Yes
46.9kHz
75Hz 49.5MHz Yes
Yes
Yes
848 x 480
31.0kHz
60Hz
33.75MHz
Yes
---
Yes
1024 x 768
48.4kHz
60Hz
65.0MHz
Yes
Yes
Yes
56.5kHz
70Hz 75.0MHz Yes
Yes
Yes
60.0kHz
75Hz 78.75MHz Yes
Yes
Yes
1152 x 864
67.5kHz
75Hz
108.0MHz
Yes
Yes
Yes
1280 x 768
47.8kHz
60Hz
79.5MHz
Yes
---
Yes
60.3kHz
75Hz 102.25MHz Yes
---
Yes
1280 x 800
49.7kHz
60Hz
83.5MHz
Yes
Yes
Yes
1280 x 960
60.0kHz
60Hz
108.0MHz
Yes
Yes
Yes
1280 x 1024
64.0kHz
60Hz
108.0MHz
Yes
Yes
Yes
80.0kHz
75Hz 135.0MHz Yes
Yes
Yes
1360 x 768
47.7kHz
60Hz
85.5MHz
Yes
Yes
Yes
1400 x 1050
65.3kHz
60Hz
121.75MHz
Yes
Yes
Yes
1440 x 900
55.9kHz
60Hz
106.5MHz
Yes
---
Yes
1600 x 1200
*1
75.0kHz
60Hz 162.0MHz Yes
Yes
Yes
1680 x 1050
65.3kHz
60Hz
146.25MHz
Yes
Yes
Yes
1920 x 1200
*1
74.0kHz
60Hz
154.0MHz
Yes
Yes
Yes
Wide
1280 x 720
44.7kHz
60Hz
74.4MHz
Yes
Yes
Yes
1920 x 1080
66.3kHz
60Hz
148.5MHz
Yes
Yes
Yes
67.5kHz
US TEXT
720 x 400
31.5kHz
70Hz
28.3MHz
Yes
Yes
Yes
Sun 1024
x
768
48.3kHz
60Hz
64.13MHz ---
---
Yes
53.6kHz
66Hz 70.4MHz ---
---
Yes
56.6kHz
70Hz 74.25MHz ---
---
Yes
1152 x 900
61.8kHz
66Hz
94.88MHz
---
---
Yes
71.8kHz 76.2Hz
108.23MHz
---
---
Yes
1280 x 1024
71.7kHz
67.2Hz
117.01MHz
---
---
Yes
81.1kHz
76Hz 134.99MHz ---
---
Yes
1600 x 1000
68.6kHz
66Hz
135.76MHz
---
---
Yes
Click on the first or last page to see other PN-E802 (serv.man3) service manuals if exist.