Sharp PN-E802 (serv.man3) Service Manual ▷ View online
CHAPTER 6. DISASSEMBLY AND ASSEMBLY
PN-E802/E702/E602 DISASSEMBLY AND ASSEMBLY
6 – 22
2 ) Disconnect four connectors, remove one screw
A (M4 x 6 SW+W, Silver), and remove the AC switch. Remove two screws B (M3 x 8 counter-
sunk, Black), and remove the AC inlet cable.
CAUTION
SCREW TIGHTENING TORQUE
n
Screw
A: 0.9 - 1.1N•m
n
Screw
B: 0.7 - 0.9N•m
■ PN-E702/E602
1 ) Disconnect four connectors, remove one screw
A (M4 x 6, Silver), and remove the AC switch. Remove two screws B (M3 x 6 countersunk,
Black), and remove the AC inlet cable.
CAUTION
SCREW TIGHTENING TORQUE
n
Screw
A: 0.9 - 1.1N•m
n
Screw
B: 0.7 - 0.9N•m
Confirm that the circle (
o
) is on
the left side and it is in the OFF.
When attaching, ensure that the terminals are
oriented as indicated in the engraved mark.
oriented as indicated in the engraved mark.
Mark
Blue
Black
White
A x 1
Screw
White
AC switch
AC inlet cable
B x 2
Screw
A
Screw
x 1
Black
White
White
Blue
Confirm that the circle
(o) is on the left side
and it is in the OFF
(o) is on the left side
and it is in the OFF
Screw x 2
AC Inlet Cable
AC Switch
Mark
When attaching, ensure that the
terminals are oriented as
indicated in the engraved mark.
terminals are oriented as
indicated in the engraved mark.
CHAPTER 6. DISASSEMBLY AND ASSEMBLY
PN-E802/E702/E602 DISASSEMBLY AND ASSEMBLY
6 – 23
12. SPEAKER L/R
1 ) Remove four screws
A (M3 x 6, Silver), remove four screws B (M3 x 10, Silver), and remove the speaker cover.
CAUTION
NOTE FOR ASSEMBLY AND DISASSEMBLY
n
Peel off the cushion partly when remove the screw
B. (PN-E802 only)
n
Be careful not to pinch the speaker cable.
SCREW TIGHTENING TORQUE
n
Screw
A: 0.7 - 0.9N•m
n
Screw
B: 0.55 - 0.65N•m
2 ) Remove two Faston terminals and two screws (M3 x 6 SW+W, Silver), remove two plain washers, and remove the speakers L/R.
CAUTION
NOTE FOR ASSEMBLY
n
The speakers L/R have an engraved mark for identification. Do not install it in the opposite direction.
n
Insert the Faston terminals securely to the bottom to fix firmly.
SCREW TIGHTENING TORQUE
n
0.7 - 0.9N•m
Band
A
Screw
x 4
B
Screw
x 4
Speaker
cover
cover
Speaker cable
When assembling, put the binding band of the
speaker cable inside the cover.
Slightly pull the speaker cable until it is
stopped by the binding band inside the cover.
speaker cable inside the cover.
Slightly pull the speaker cable until it is
stopped by the binding band inside the cover.
Cution A
L-ch
R-ch
Speaker L
Speaker R
Screw x 2
Washer x 2
Washer x 2
Screw x 2
Washer x 2
Washer x 2
Mark
Mark
Faston terminal
Red
Black
Pull it out while
holding down the
part below.
holding down the
part below.
CHAPTER 6. DISASSEMBLY AND ASSEMBLY
PN-E802/E702/E602 DISASSEMBLY AND ASSEMBLY
6 – 24
13. BEZEL
■ PN-E802
1 ) Remove twenty-four screws (M4 x 8 SW+W, Black). Remove the corner covers B1 (4 positions) and the front bezels TOP B (2 positions), and
remove the front bezel BTM B, and remove the front bezel LR B (2 positions).
CAUTION
SCREW TIGHTENING TORQUE
n
0.9 - 1.1N•m
2 ) Remove twelve screws (M3 x 5, Black), and remove the front bezel LR (2 positions).
CAUTION
SCREW TIGHTENING TORQUE
n
0.55 - 0.65N•m
Screw x 24
Front bezel TOP B
Front bezel
LR B
LR B
Front bezel BTM B
Front bezel
LR B
LR B
Corner cover B1 x 4
Screw x 12
Front bezel LR
Front bezel LR
CHAPTER 6. DISASSEMBLY AND ASSEMBLY
PN-E802/E702/E602 DISASSEMBLY AND ASSEMBLY
6 – 25
3 ) Remove twelve screws
A (M3 x 5, Black), and remove the front bezel TOP F assembly and the front bezel BTM F assembly. Remove four
screws
A (M3 x 5, Black) from the front bezel TOP F assembly and the front bezel BTM F assembly. Remove eight screws B (M3 x 5 FFH-
SCR), and remove the corner cover assembly (4 positions).
CAUTION
NOTE FOR ASSEMBLY AND DISASSEMBLY
n
When removing the front bezel BTM F assembly, be careful not to pull the FFC. When assembling, be careful not to pinch the FFC.
n
When assembling the front bezel TOP F assembly and the front bezel BTM F assembly, fix the screw 1 at first, and fix the other screws.
SCREW TIGHTENING TORQUE
n
Screw
A: 0.55 - 0.65N•m
n
Screw
B: 0.4 - 0.5N•m
Front bezel TOP F assembly
Front bezel BTM F assembly
1
1
A
Screw
x 12
B
Screw
x 8
A
Screw
x 4
Front bezel
TOP F/BTM F
TOP F/BTM F
Corner cover
assembly x 4
assembly x 4