DOWNLOAD Sharp PN-E521 (serv.man5) Service Manual ↓ Size: 4.74 MB | Pages: 64 in PDF or view online for FREE

ENGLISH

7

E

Connection with a PC or AV equipment .......................8
Connection when the PN-ZB01 (optional)  
is attached ....................................................................9

Installing the batteries ................................................11
Remote control operation range .................................11

Turning on the main power.........................................12
Turning power on/off ..................................................12
Disabling power on/off operations ..............................12

This manual contains instructions regarding connection and installation.

For other instructions, refer to the instruction manuals in the “manual” folder on the included CD-ROM.

Adobe Reader is required in order to view the instruction manuals.

If any component should be missing, please contact your dealer.


 Liquid Crystal Display Monitor: 1



 Remote control unit: 1



 Cable clamp: 2



 Power cord: 1



 R-6 battery (“AA” size): 2



 CD-ROM (Utility Disk for Windows): 1



 Operation manual: 1



 Stand hole protection cover: 2



 Vertical sticker (Operation panel): 1



 Vertical sticker (Logo): 1



  Blank sticker: 1 

Place a blank sticker onto the SHARP logo to cover the logo.

*  Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.

*  For environmental protection!

  Do not dispose of batteries in household waste. Follow the disposal instructions for your area.

8

E

Caution

•  Be sure to turn off the main power switch and disconnect

the plug from the power outlet before connecting/

disconnecting cables. Also, read the manual of the 

equipment to be connected.

•  Be careful not to confuse the input terminal with the output

terminal when connecting cables. Accidentally reversing 

cables connected to the input and output terminals may 

cause malfunctions and the other problems.

TIPS

•  Images may not be displayed properly depending on the

computer (video card) to be connected.

•  A screen with 1920 x 1080 resolution may not be

displayed correctly on PC RGB. In this case, check the

settings of your computer (video card) to verify that input 

signals conform to specifications of this monitor. (See

Specifications.)

•  If there is a check box to disable EDID in display control

panel, check it when using PC RGB.

•  Use the automatic screen adjustment when a PC screen

is displayed for the first time using PC D-SUB or PC RGB,

or when the setting of the PC is changed. The screen is 

adjusted automatically when SELF ADJUST in the OPTION 

menu is set to ON.

•  If the audio output from the playback device is connected

directly to speakers or other devices, the video on the 

monitor may appear delayed from the audio portion. 

Audio should be played through this monitor by connecting 

the playback device to the monitor’s audio input, and 

connecting the monitor’s audio output to the speakers or 

other devices.

•  The audio input terminals used in each input mode are

factory-set as follows.

PC D-SUB, PC DVI-D,  

PC RGB

Audio input terminal

AV DVI-D

Audio1 input terminal

AV COMPONENT,  

AV S-VIDEO, AV VIDEO

Audio2 input terminal

PC HDMI, AV HDMI

PC/AV HDMI input terminal

  1.  PC/AV HDMI input terminal

•  Use a commercially available HDMI cable (conforming to

the HDMI standard) for PC/AV HDMI input terminal.

•  Set HDMI of INPUT SELECT on the OPTION menu

according to the device to be connected.

•  Select the audio input terminal to be used in PC HDMI

or AV HDMI of AUDIO SELECT on the OPTION menu. 

When HDMI is selected, connection to the audio input

terminal is unnecessary.

•  When the PN-ZB01 (optional) is attached, select the audio

input terminal to be used in PC D-SUB of AUDIO SELECT

on the OPTION menu.

•  Use an audio cable without resistance.

•  When the PN-ZB01 (optional) is attached, set the audio

input terminal used for each input mode in AUDIO 

SELECT on the OPTION menu.

•  The output sound varies depending on the input mode.

•  The volume of the output sound can be fixed by setting

AUDIO OUTPUT on the OPTION menu.

•  It is not possible to control the sound output from the

audio output terminals with the AUDIO menu.

•  You can control the monitor from a PC by connecting a

commercially available RS-232 straight cable between 

these terminals and the PC.

13

12

14

6

5

3 4

2

8

11

7

10

9

1

5

9

E

ENGLISH

The PN-ZB01 expansion board (optional) allows the use of

additional connection terminals.
  6.  PC/AV DVI-D input terminal

•  Set DVI of INPUT SELECT on the OPTION menu

according to the device to be connected.

•  Select the audio input terminal to be used in PC DVI-D or

AV DVI-D  of AUDIO SELECT on the OPTION menu.

•  Set BNC of INPUT SELECT on the OPTION menu to PC

RGB when using the PC RGB input terminals.

•  Select the audio input terminal to be used in PC RGB of

AUDIO SELECT on the OPTION menu.

•  Set BNC of INPUT SELECT on the OPTION menu to

AV COMPONENT when using the AV component input 

terminals.

•  Select the audio input terminal to be used in AV

COMPONENT of AUDIO SELECT on the OPTION menu.

•  Select the audio input terminal to be used in AV VIDEO of

AUDIO SELECT on the OPTION menu.

•  Select the audio input terminal to be used in AV S-VIDEO

of AUDIO SELECT on the OPTION menu.

•  Set the audio input terminal to be used in each input

mode in AUDIO SELECT on the OPTION menu.

•  You can control the monitor from a PC on a network by

connecting a commercially available LAN cable between 

this terminal and a network.

•  To use external speakers, set SPEAKER SELECT on the

SETUP menu to EXTERNAL.

•  Be sure to use external speakers with an impedance of 6 Ω

or greater and a rated input of at least 10 W.

1

3

2

Approx.

3-15/16 inch

(10 cm)

1. Attach a speaker cable core (included with the PN-ZB01) to

the end of the speaker cable connected to the monitor.

2. While pushing the tab, insert the tip of the cable.

3. Release the tab.

TIPS

•  Be sure to connect the + and - terminals and the left and

right speakers properly.

•  Avoid short circuiting the + and - terminals.

•  When SPEAKER SELECT is set to EXTERNAL, the

internal speakers are disabled.

•  The video of the PC/AV DVI-D input can be output to an

external device.

•  Outputting HDCP-encrypted video requires an external

device which supports HDCP.

•  This terminal allows the daisy chain connection of up to 5

monitors.

TIPS

•  The length of the signal cables or surrounding environment

may affect the image quality.

•  The screen may not display properly when using terminals

other than PC DVI-D/AV DVI-D for the input mode. In this 

case, turn off the power to all the monitors connected in a 

daisy chain and then turn the power on again.

•  When connecting monitors in a daisy chain set AUTO

INPUT CHANGE to OFF.

•  Video output is disabled in the following cases: 

When the input mode is PC HDMI/AV HDMI 

When PIP SOURCE of the PIP/PbyP menu is set to PC

HDMI or AV HDMI 

When the power is turned off 

When the monitor is in input signal waiting mode

10

E

Caution

•  Do not use a power cord other than the one supplied with

the monitor.

1. Turn off the main power switch.

2. Plug the power cord (supplied) into the AC input terminal.

3. Plug the power cord (supplied) into the AC power outlet.

The cables connected to the terminals on the rear of the 

monitor can be fastened with the cable clamp.

Insert the cable clamp into the cable clamp attachment on the 

rear of the monitor and fasten the cables.

AC input terminal

1

Main power switch

Power cord (Supplied)

For power 

outlet

2

3

The handles can be removed.

The removed handles can be attached on the rear side.

Caution

•  The removed handles and handle screws are for use with

this monitor. Do not use them for any other devices.

•  To attach handles, be sure to use the handles and handle

screws which were removed from the monitor.

•  Be sure the handles are attached securely.

Handle

Handle screws

Handle

Handle screws

Cable clamp

Cable clamp 

attachment

Cable