Sharp UP-X300 (serv.man45) Service Manual ▷ View online
UP-X300V
DIagnostics Specifications
3 – 23
4-14 WMF Clerk Key Test
4-14-1.Outline
The read test of the WMF clerk key is performed.
4-14-2.Tool to be used
• UP-X500 system unit diagnostic test execution media x 1
4-14-3.Items to be checked
The following items will be checked:
Clerk test
Error table
4-14-4. Detail of test
(1) Clerk Test
The read data of the clerk key is displayed.
(2) Error Table
A list of error information on (1) Clerk Test recorded in DRAM is displayed.
If no error occurs, OK or NO ERROR is displayed.
If no error occurs, OK or NO ERROR is displayed.
4-14-5. Test screen
(1) Menu screen
With the above screen displayed, select the test item you want to execute
using [
2 ] and [ 4 ] keys, and then press [ENTER] to execute the test.
You can return to the initial menu screen by pressing the [ESC] key.
(2) Contactless Clerk Key Test screen
The number of the clerk key connected to the system unit is displayed.
The display returns to the initial screen when any key is pressed.
4-14-6. Errors
(1) PCP3 Send Time Out
(2) PCP3 Receive Time Out
(3) PCP3 Response Error
Command response error.
Erroneous read data end code
4-15 CONTACTLESS CLERK KEY TEST
4-15-1. Outline
The read test of the contactless clerk key is performed.
4-15-2. Tool to be used
• UP-X500 system unit diagnostic test execution media x 1
4-15-3. Items to be checked
The following items will be checked:
Contactless clerk key
Error table
Contactless clerk key
Error table
4-15-4. Detail of test
(1) Contactless Clerk Key Test
The read data of the contactless clerk key is displayed.
(2) Error Table
A list of error information on (1) Contactles Clerk Key Test recorded in
DRAM is displayed.
DRAM is displayed.
If no error occurs, OK or NO ERROR is displayed.
4-15-5.Test screen
(1) Menu screen
With the above screen displayed, select the test item you want to exe-
cute using [
cute using [
2 ] and [ 4 ] keys, and then press [ENTER] to execute the test.
You can return to the initial menu screen by pressing the [ESC] key.
(2)Contactless Clerk Key Test screen
The number of the clerk key connected to the system unit is displayed.
The display returns to the initial screen when any key is pressed.
4-15-6. Errors
(1) Read Data Header Error
(2) Read Data SUM Error
(3) Read Data Footer Error
Erroneous read data end code
(4) SIO Send Time Out
No send data cannot be written.
(5) SIO Receive Time Out
4-16. PCP3 Update
4-16-1. Outline
The PCP3 firmware is updated.
4-16-2. Tool to be used
• UP-X500 system unit diagnostic test execution media x 1
㪚䌬䌥䌲䌫 䌋䌥䌹 䌔䌥䌳䌴
C
䌬䌥䌲䌫 䌔䌥䌳䌴
Error Table
CURSOR: Move ENTER: Select ESC: Exit
WMF Clerk Key No. Display
CLERK KEY No. : XXX
Press any Key to Exit.
㪚㫆㫅㫋㪸㪺㫋㫃㪼㫊㫊㩷㪚䌬䌥䌲䌫 䌋䌥䌹 䌔䌥䌳䌴
㪚㫆㫅㫋㪸㪺㫋㫃㪼㫊㫊㩷C䌬䌥䌲䌫 䌔䌥䌳䌴
Error Table
Error Table
CURSOR: Move NTER: Select ESC: Exit
Contactless Clerk Key Code Display
Clerk Key Code : XX XX XX XX XX XX XX XX
Press any Key to Exit.
UP-X300V
DIagnostics Specifications
3 – 24
4-16-3. Items to be checked
The following items are checked by this test:
PCP3 Update
Error table
4-16-4. Detail of test
(1) PCP3 Update
The PCP3 firmware is updated.
(2) Error Table
A list of error information on (1) PCP3 Update recorded in DRAM is displayed.
If no error occurs, OK or NO ERROR is displayed.
4-16-5. Test screen
(1) Menu screen
With the above screen displayed, select the test item you want to exe-
cute using the [
cute using the [
2 ] and [ 4 ] keys, and then press the [ENTER] key to exe-
cute the test.
You can return to the initial menu screen by pressing the [ESC] key.
(2) Screen to be displayed before executing PCP3 update
With the above screen displayed, type "184184" using the numeric keypad.
EEPROM will be initialized and then the execution screen will appear.
You can return to the menu screen by pressing the [ESC] key.
(3) PCP3 Update screen
The PCP3 firmware unloader is executed and the result is displayed.
The display will return to the initial menu screen when any key is pressed.
The display will return to the initial menu screen when any key is pressed.
PCP3 UPDATE
PCP3 UPDATE
Error Table
Error Table
CURSOR: Move ENTER: Select ESC: Exit
ESC: Exit
Operation press "184184" to execute.
PCP3 UPDATE
OK
Press any Key to Exit.
UP-X300V
CIRCUIT DESCRIPTION
4 – 1
CHAPTER 4. CIRCUIT DESCRIPTION
1. OUTLINE
Item
UP-X300
CPU
CPU
VIA Eden: 733MHz
BUS clock
133MHz
L1, L2 Cashe
CPU Built-in (128kB, 64kB)
CPU fun
NO
Chipset/Companion
CLE266
Memory
Standard Spec
DDR-SDRAM PC2100
Size
128MB
184pinDIMM
Option
Spec
DDR-SDRAM PC2100
184 pinDIMM (Max.512MB)
184 pinDIMM (Max.512MB)
Socket 1
E C C
support
support
No
BIOS/BOOT
128 M bit Flash PROM
PCI
No
3.5'FDD
No
Compact
flash slot
flash slot
Spec
True IDE
Compact flash
Standard
128 Mbytes
Option
No
Display (LCD)
Size
12.1inch TFT color
Resolution
XGA
Display controller
Controller
CLE26 Built-in
CPU I/F
AGP x 4 (LSI Internal connection)
VRAM
8~64MB (Soft setup)
RGB output
No
Touch Panel
Touch panel
Fujitsu 4-wire
Controller
FUjitsu
CPU I/F
USB
Ethernet
100 Base-TX/10Base-T
Sound
Controller
No
Mono-speaker
Yes (BEEP only)
Stereo lineout
No
Sirial port
16550 Fast UART Compatible
Controller
NS SIO10N268
External Channel
3
COM1
D.Sub9pin
COM2
D.Sub9pin (Ci signal/+5V soft-
warecontrol)
warecontrol)
COM3
D.Sub9pin
CustomerDisplay
COM4
Controller
NS SIO10N268
UP-P20DP
RJ45
UP-I20DP
(UP-I20DP only)
USB port
USB2.0 x 2
PS/2
Yes
Magnetic card
reader
reader
Spec
3 trackreader
Controller
PCPIII
Option
Yes
DrawerI/F
Controller
PCPIII
Connecter
2
POS key board
No
POS Printer
No
LED
HDD access
No
LAN access
No
Power
Yes
SWITCH
AC Power switch
WMF clark I/F
Standard
Yes (V only)
Controller
PCPIII
Contactless
clark I/F
clark I/F
Standard
Yes (V only)
Controller
UART
Battery
C.MOS RAM BackupLithium
Item
UP-X300
UP-X300V
CIRCUIT DESCRIPTION
4 – 2
2. BLOCKDIAGRAM
CPU
ESP8000
(ESP7000)
North
VT8623
(CLE266)
DIMM
㬍2
DDR-SDRAM
128MB
TOUCH
Clock Gen.
RGB.
LCD
VLINK 4X
Thermal
Sensor
South
VT8235
VT8235
CPU P.S.
PHY
LVT6103
LAN
LCD cont.
SMbus
INV.
LVDS
TPC
USB
Ultra-I/O
SIO10N268
SIO10N268
PS2
LPC
CF
IDE
IDE
MCR
COM3
COM2
COM1
POS MCU
PCP3
WMF
DRAWER
x 2
DRAWER
x 2
XBUS
Rear-DP
D/R
D/R
D/R
D/R
DC-DC
POWER
SUPPLY
BIOS ROM
UART
(Vonly)
C16550
CLERK
POWER SUPPLY UNIT
䋨AC ADAPTOR䋩
USB
㬍2
Dr.
Click on the first or last page to see other UP-X300 (serv.man45) service manuals if exist.