Sharp UP-X300 (serv.man36) Handy Guide ▷ View online
17
3) When Data Control is highlighted as above select Tools > Select
Option then Select the location to restore from (Hard Disk 3 is the
USB memory stick) i.e. 20050711 as shown below (With Clear is
only applicable when restoring see below).
USB memory stick) i.e. 20050711 as shown below (With Clear is
only applicable when restoring see below).
4) Select OK
5) The Screen will then display Data Control.
18
Performing a Restore All
6) Now select Restore (All) and choose the correct file and Press
OK
OK
Restoring using the “With Clear” option
When performing a Restore (All) using the “with clear” option all
sales and program data in the POS is overwritten.
sales and program data in the POS is overwritten.
When performing a Program Restore using the “with clear”
option all program data in the POS is overwritten.
option all program data in the POS is overwritten.
Restoring without using the “With Clear” option
When performing a Restore (All) without using the “with clear”
option, sales and program data from the backup file append to the
data in the POS.
option, sales and program data from the backup file append to the
data in the POS.
When performing a Program Restore without using the “with
clear” option, program data from the backup file appends to the
data in the POS.
clear” option, program data from the backup file appends to the
data in the POS.
19
UP-X300 Network Installation Procedure
When setting up the network the Server should be set up first followed by the
Backup Server then the Clients.
Disconnect All LAN Cables
2) Perform OS Shutdown on ALL UP-X300’s
SERVER Setup
3) Power on Server ONLY
During Power up process of Server select Master Reset
4) Enter the MRS code 13974682
(Please note entering an incorrect code will cause the machine to skip the
MRS process and will reboot to the application)
20
Change IP Address here and select OK
5) Temporarily select Backup Server/Terminal
6) Set POS Server IP Address
7) Select back to POS Server
8) Select OK
IP of this Terminal
Own Terminal #
Click on the first or last page to see other UP-X300 (serv.man36) service manuals if exist.