Sharp UP-V5500 (serv.man6) Service Manual ▷ View online
UP-V5500 S/M V1.1 – 2010-06-24 -*- Page
8 of 77
2-2.
Generally Specification
Model Name
UP-V5500
Dimensions
380(W) × 311(D) × 320(H)
㎜
Weight
6.4kgs / 14.11Lb
Power source
Official (nominal) voltage and frequency
Power consumption
Operating: less than 90 W
Working temperature
5 to 35
℃ / 41°F to 95°F
3. Hardware Specification
Item Specification
Note
CPU Intel®
Atom
TM
N270 1.6GHz
DDR2-RAM
Standard 1GB
Maximum 2GB
Slot 1
200 pin SODIMM module
BIOS AMI
BIOS
HDD
160GB * 1
2.5inch SATA2
Size 15inch
XGA
DISPLAY
Tilt function
Up & down 53°
Touch panel
4 Wire resistive
Main power switch
Lower right rear side,
Push button type
Indicator LED
Orange/Green
OFF/ON, HDD Access, Network
SHARP Cash Box
2*SHARP Header (5046-03A), 1*3pin
COM
3*D-sub 9pin connectors for COM
ports(powered +5/+12Volt)
LAN 1*RJ45
VGA 1*15pin
D-sub
RJ-45(CDP) RS-232
interface connector (RJ-45)
Rear I/O
SHARP CDP interface
RS-232 interface using Header (53015-
0710), RJ45
Parallel
1*D-sub25pin connector for LPT
USB 2*(2port)
USB
connector
RJ11(CBX)
1*RJ11 connector for Cash Box (VCT
spec.)
External
I/O
Side I/O
Audio
1*ear-jack for 2W stereo Speaker out
53°
COM
1*D-sub 9pin connector for COM
port(powered +5/+12Volt)
Front
Clerk Key
RS-232 interface SHARP spec.
Magnetic card reader (optional
in some sales regions)
ISO 7810, I/II/III Track /
JIS2
Option can be integrated at the right
hand side of the LCD cabinet side
Internal rear customer display:
Sharp UP-I20DP
English CDP (option)
Remote customer pole display:
UP-P20DP/UP-P20DPB
Embedded back filter inside
Operating Temperature
5ºC to 35ºC, 41°F to 95°F
Operating Humidity
20% to 90%
Storage Temperature
-20ºC to 70ºC
Environment
Storage Humidity
0% to 90%
Operating System
Windows Embedded POSReady
Device
OPOS Drivers and diagnostic utility
Software
Recovery DriveClone
3.1 Lifetime Specification
LCD-Backlight tube: average lifetime about 50,000hours (50% of performance)
Lithium batteries: average lifetime about 5~6 years (rough value with -20°C, standard load)
Touch Panel: durability of 1 million times at touching of the same position
Machine: durability of 5 years
The data in this Life time specification are not intended to make or imply any guarantee or warranty.
UP-V5500 S/M V1.1 – 2010-06-24 -*- Page
9 of 77
UP-V5500 S/M V1.1 – 2010-06-24 -*- Page
10 of 77
3.2 LCD sub pixel inspection criteria
No
ITEMS
INSPECTION CRITERIA
1
Bright/Dark Sub Pixel Defect
( In the center of LCD panel)
( In the center of LCD panel)
N≤1
2
Bright Sub Pixel Defect
N≤3
3
Dark Sub Pixel Defect
N≤4
4
Bright + Dark Sub Pixel Defect
N≤5
5
2 Adjacent Bright Sub Pixel Defect
N≤2
6
2 Adjacent Dark Sub Pixel Defect
N≤3
7
3 Adjacent Bright Sub Pixel Defect
N≤1
8
3 Adjacent Dark Sub Pixel Defect
N≤2
INSTALL LOCATION & DIRECTIONS FOR USE
Before system installation, it is important to select the safe and comfortable place which is satisfied with the
following contents.
following contents.
Select a hard surface with enough room to meet system requirements.
Select a place where the product is protected from electrostatic shock which could cause damage to the
product or data loss.
product or data loss.
Select a place for the product with ample ventilation to prevent heat build up.
Select the dry and cool place and avoid high temperature difference, high humidity, dense dust, or the direct
rays of the sun.
rays of the sun.
Select proper electric power. Connect all the equipment to properly grounded outlet.
Keep the systems away from devices generating electricity.
Do not place heavy materials on this product, and do not put high pressure to the product.
Do not hit, drop or allow other material to drop onto the products damage may result.
Do not hit or drag on its surface with sharp or pen because touch panel can be easily scratched, and the
durability can be shortened due to the damage.
durability can be shortened due to the damage.
This product is not waterproof. Please keep this product away from liquid.
After turning the product OFF wait for a minimum of 5 seconds before turning the product back ON
Turn off and disconnection the machine from power when moving the product.
Do not move the product to place where the difference of temperature is more than 10 degrees because that
can cause the corrosion of the product.
can cause the corrosion of the product.
Microsoft POS Ready2009 OS has been developed with specialty for the use of POS system or KIOSK.
Some common software cannot be operated normally in this OS because there is a specialized controlling
function compared to other general OS.
Some common software cannot be operated normally in this OS because there is a specialized controlling
function compared to other general OS.
When COM port is set to provide +5 volts through the serial pin, it is required that the unit be turned off
when attaching or removing any serial from the COM port. (Please refer to page 44 which the COM port
settings are described in.)
when attaching or removing any serial from the COM port. (Please refer to page 44 which the COM port
settings are described in.)
※ In the event of a failure of any external peripheral device the UP-V5500 may shut down to protect the
terminal. In order to correct this remove the potential defective device and unplug the power adapter
for 60 sec before turning the unit back on.
for 60 sec before turning the unit back on.
UP-V5500 S/M V1.1 – 2010-06-24 -*- Page
11 of 77
Click on the first or last page to see other UP-V5500 (serv.man6) service manuals if exist.