Sharp UP-V5500 (serv.man6) Service Manual ▷ View online
CONNECTING PERIPHERAL
1.
Keyboard and mouse connection
There are 4 USB ports in the left side IO port.
Only USB type of keyboard and mouse can be connected.
2. Printer connection
The serial type, the parallel type, and the USB type of
printers for receipt can be connected. Serial port is
located in the backside IO port, and parallel port is
located in the left side IO port.
<
Mouse>
<
Receipt Printer>
<
Keyboard>
3. Barcode scanner connection
Connect to the serial ports. ( Barcode scanner, Serial interface
devices etc.)
4. Cash Drawer connection
When a VCT Cash Drawer is used, connect it to the CBX port
at the side I/O port on this system. The connection for Sharp
drawer units is realized at the marked rear I/O ports.
<
Hand Scanner>
<
Cash Drawer>
5. Peripheral devices for the Sound
6. RJ-45 LAN cable connection
Your system has an RJ-45 LAN connector with the
connection and activity status LED on the front of the
system. You can connect the RJ-45 cable from the RJ-
45 connector on the system to both 10Base-T and
100Base-TX.
connection and activity status LED on the front of the
system. You can connect the RJ-45 cable from the RJ-
45 connector on the system to both 10Base-T and
100Base-TX.
connection
External amplified speaker or H/P can be connected.
<
Headphone> <Speaker>
<
LAN Hub>
UP-V5500 S/M V1.1 – 2010-06-24 -*- Page
12 of 77
UP-V5500 S/M V1.1 – 2010-06-24 -*- Page
13 of 77
SYSTEM Replacement & Attachment
mer
Open the Rear Customer Display cover.
Separating the Body
of the body.
Remove the top cover from the CPU cabinet body
Separating the
LCD Board cable.
※
)
Remove 4 screws and separate the Top Cover from the LCD
1. Separation of LCD monitor and CPU cabinet body
Removal of Rear Customer Display cover
Remove 2 screws at the bottom side at the Rear Custo
Display cover.
Remove 6 screws in the bottom
LCD monitor
Remove the USB, LVDS connectors and
Touch connector should be located CN26 (Reference page 37
monitor
.
Remove 2 screws
Remove 6 screws
CPU Box
Top Cover of CPU Box
Remove 4 screws
Open the cover
UP-V5500 S/M V1.1 – 2010-06-24 -*- Page
14 of 77
2. LCD Panel and Touch Screen
Caution for Touch Panel Assembly>
* To fit into LCD Front cabinet Touch panel should be assembled along the guide.
To prevent gap of Touch Panel bagginess, there should be assembled flat.
ease put the article of 5Kg weight on middle of LCD Panel bracket during assembly.
Monitor and Body (refer to page 11).
.
Open the Rear Cover of LCD monitor.
<
*
* Pl
* Pl
Separating the LCD Panel
Remove the MCR rear cover after separating the LCD
Remove 2 screws as the shown below
Remove the LVDS, FPC, Inverter Connectors
.
Remove 2 screws
Inverter Connector
FPC Connector
LVDS Connector
UP-V5500 S/M V1.1 – 2010-06-24 -*- Page
15 of 77
Remove 14 screws from LCD bracket.
Separate to the LCD Front cabinet and LCD bracket.
Remove 4 screws
.
Separate LCD bracket and LCD Panel.
Separating the Touch Screen
Separate Touch Screen and LCD Front Co
from the LCD bracket
ver.
Remove 4 screws
Remove 4 screws
Remove 3 screws
Remove 3 screws
D bracket
LC
Remove 4 screws
Touch Screen
LCD Front Cabinet
LCD Panel
Click on the first or last page to see other UP-V5500 (serv.man6) service manuals if exist.