Sharp UP-V5500 (serv.man6) Service Manual ▷ View online
UP-V5500 S/M V1.1 – 2010-06-24 -*- Page
28 of 77
LF
Line Feed (0x0A) is a special code that can move to next line.
Report Code
Error Report is the option that reports error
Error Track : ~~~
Error Track reports an error as ~~~ when Magnetic Card is something wrong with or when you swipe
Magnetic Card in inaccurate way.
7. Tool Bar
According to Frequency in use the Tool is arranged.
[Picture 6] Tool Bar
Open [Open a Setting File]
Open .vms file. Untitled.vms is basically saved
Save
ormation displayed in MCR Information Display as a file.
Save an inf
Read the setting
Read a setting at MCR
If MCR and Communication setting is different, it might not read a file.
If MCR and Communication setting is different, it might not read a file.
Write the setting.
Save in MCR as displayed setting in MCR Information Display. Change value as you wish and click the
button.
UP-V5500 S/M V1.1 – 2010-06-24 -*- Page
29 of 77
VCT [Read Default VCT]
Retrieve configuration value setting as Default VCT.
e divided into two as the [Table1].
is added on first and [CR][LF] is added on the end of each
Default can b
If you click VCT button, Start Sentinel
If you click VCT button, Start Sentinel
Track.
rn, Line Feed
?Track2[CR][LF]
k3[CR][LF]
Default (ISO) is set up as a factory condition.
* [CR][LF] : Carriage Retu
ex) %Track1[CR][LF]
ex) %Track1[CR][LF]
^Trac
※
ISO [Read Default ISO]
et up Track value according to ISO standard. Like [Table 1], Start Sentinel, End Sentinel is added at first
nd the end of each Track and [CR][LF] is added at the end of each Track.
ex) %
;Track3?[CR][LF]
[Table 1]
S
a
Track1?[CR][LF]
;Track2?[CR][LF]
ISO
VCT
Start Sentinel
End Sentinel
Start Sentinel
End Sentinel
1 Track
% ? %
2 Track
; ? ?
3 Track
; ? ^
UP-V5500 S/M V1.1 – 2010-06-24 -*- Page
30 of 77
Communication Configuration
-232C type connected to MCR.
Check or change Port Configuration information of RS
[Picture 7] Communication Set
possible to modify Port Number and Baudrate but do not modify.
Default is Port Number: COM7 / Baudrate : 19200 / Parity : None / Data bit : 8 / Stop Bit : 1 and do not
modify the default unless Hardware is changed.
It is
Test Mode
Test MCR to check whether it functions well according to MCR configuration.
Card information will be displayed on the MCR information display view if you swipe Magnetic Card at
Card information will be displayed on the MCR information display view if you swipe Magnetic Card at
MCR.
UP-V5500 S/M V1.1 – 2010-06-24 -*- Page
31 of 77
THE M
E LANGUAGE(Microsoft POSReady)
ETHOD TO CHANG
The m
changed to local
language that does not use English such as Germany, France, Spain, and other countries. Please
follow the below steps.
follow the below steps.
The method to change language settings
[Start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Regional and Language Options]
1. [Regional Options]
A. Standards and formats
- Please select your local language
B. Location
- Select the location from the list
2. [Languages]
A. Text Services and Input Languages -> Click the “Details” button
- Default Input Language.
Click 'OK' button
B. Language used in menus and dialogs
etting is 'English (United states - US)', please change to local language.
3.
Current setting is 'English (United states - US)', please change to local language
B. Default user account settings
- Select 'Apply all settings to the current user account and to the default user profile'
4. Please click “OK” when you finished your settings.
5. There will have three popup, please click “OK” button
5. There will have three popup, please click “OK” button
Change Region Options
Advanced
Change Regional Options
Advanced
Change Regional Options
[Change Region Options]
Changes to the UI language will not take effect until you log off and logon again.
=> OK
[Advanced]
The required files are already installed on your hard disk. Setup can use there existing files, or Setup can recopy
Changes to the UI language will not take effect until you log off and logon again.
=> OK
[Advanced]
The required files are already installed on your hard disk. Setup can use there existing files, or Setup can recopy
aster default of POSReady 2009 for UP-V5500 is English. There should be
Current setting is 'English (United states - US)', please change to local language.
- Installed Services
Please check your keyboard of installed language
- Current s
[Advanced]
A. Language for non-Unicode programs
-
Click on the first or last page to see other UP-V5500 (serv.man6) service manuals if exist.