Sharp UP-V5500 (serv.man6) Service Manual ▷ View online
2. OPOS installation file location
3. Installation method
MCR Configuration
1. Overview
2. Setup
3. Start MCR Configuration
4. MCR Configuration Tool
5. MCR information display
6. Detail control
7. Tool Bar
2. Setup
3. Start MCR Configuration
4. MCR Configuration Tool
5. MCR information display
6. Detail control
7. Tool Bar
THE METHOD TO CHANGE LANGUAGE(Microsoft POSReady)
POS TERMINAL DRIVER AND UTILITY OVERVIEW
TOUCH SCREEN SET-UP
PCB OVERVIEW
1. System Main B/D
1-1.
System Block Diagram
1-2.
Main B/D Block Diagram
1-3.
Components Layout
1-4.
Connector Pin Assignment
2. LCD unit Sub-Control B/D
2-1.
Block Diagram
2-2.
General Specification
2-3.
Components Layout
2-4.
Connector Pin Assignment
3. Magnetic Card Reader Interface B/D
3-1.
Block Diagram
3-2.
General Specification
3-3.
Components Layout
3-4.
Connector Pin & Software Interface Description
4. LED B/D
4-1.
Block Diagram
4-2.
General Specification
4-3.
Components Layout
4-4.
Connector Pin Assignment
CABLE PIN ASSIGNMENT
EXPLODED DRAWING
Due to continuous enhancements of the system features and the wide range of products available, the contents of this manual are subject to change without notice.
The company is not responsible for any damage caused by using products other than in their standard specification, or by not conforming to the instructions and
warnings set forth in this and any other manual.
UP-V5500 S/M V1.1 – 2010-06-24 -*- Page
4 of 77
UP-V5500 S/M V1.1 – 2010-06-24 -*- Page
5 of 77
THE PACKAGE CONTENTS
UP-V5500 Main System
Packing Carton
Packing Form
Adaptor & AC Cord
User Manual
Accessory Box
UP-V5500 S/M V1.1 – 2010-06-24 -*- Page
6 of 77
FEATURES
1. Product features
The product uses a high visibility (250cd/
㎡ luminance) LCD screen with a touch screen interface for input.
Monitor can be tilted in 53 degree and can be moved up and down. The product can be adjusted according to user
environment, and can be fixed to the wall.
The product has no fan and is noiseless by design.
Hard disk supports SMART (Self Monitoring, Analysis and Reporting Technology) function, and realizes a stable
system configuration through the backup of OS, disk, partition, and file data, and providing disaster restoration solution
by using Drive Clone software.
This product uses Microsoft POS Ready 2009 (or similar operating system) which is designed for POS system and
KIOK applications.
This product has the wake-on function based on Magic Packet™ technology for remote booting and control through
LAN.
This product provides sufficient interface (USB, Serial, Parallel, LAN, and etc.) for facilitating the use of various POS
peripheral devices.
* Note: The application software will determine the usage and availability of the interfaces.
2. Product overview
2-1.
Exterior
< FRONT >
< REAR >
15” TFT LCD & Touch Screen
Magnetic Stripe Reader
(In some regions optional)
LED Indicator
Contactless key
Brightness
Customer Display
(Option)
Rear IO Port
Power Switch
Side Cover & IO Port
UP-V5500 S/M V1.1 – 2010-06-24 -*- Page
7 of 77
Side cover release lever
(Located at the bottom cabinet)
(Located at the bottom cabinet)
②
③
Audio Output
CBX Port
(For connection of VCT cash drawer)
Parallel port
(For connection with printer etc.)
UBS Ports
(For connection with CD-ROM drive unit,
FDD unit, mouse, etc.)
COM PORT 4
(For connection with scanner etc.)
(For connection with scanner etc.)
COM PORT 1
COM PORT 2
COM PORT 3
PORT for Internal
Customer Display
Customer Display
SHARP UP-I20DP
VGA PORT (2
nd
Monitor)
SHARP Drawer
Connector
LAN PORT (RJ45l)
PORT External
Customer Display
< Rear IO Port >
< Side IO Port >
Operation Display : This is the 15 inch TFT-LCD screen equipped with touch screen.
This shows system operation and user can adjust system with touch screen.
Operation display can be moved with a range of 53 degrees.
User can adjust the product with various ranges according to user height. User can hang
the product on the wall after folding it completely.
Magnetic Stripe Reader (Optional device in some regions): User can read credit card or all the point card information.
LED indicator: This shows system power on/off, hard disk operation, or network status.
Power Switch: User can turn on the system power. When there is a problem in the system, user can turn off the system by compulsion.
Side cover: This is the cover protecting I/O port placed in the left side of the system.
While moving the side cover release lever toward
You, pull the side cover and rotate the cover upward
as shown in the illustration at the right.
as shown in the illustration at the right.
Customer Display (Optional device): User can equip with a 2 lines fluorescent display of 20 characters.
Contactless key body (Optional device in some region): Use contactless key. This is used to identify employees or users.
53°
Click on the first or last page to see other UP-V5500 (serv.man6) service manuals if exist.