Sharp DOS HOSPITALITY (serv.man7) FAQ ▷ View online
Startup
Startup
Errors
Errors
UP-??? Frequently Asked Questions
UP-??? Frequently Asked Questions
“Update failed 14080” appears when signing on
with clerk you can the clear the error but it
appears again at sign on.
with clerk you can the clear the error but it
appears again at sign on.
The problem occurs generally
after deleting the RTU and UPINST folders,
however when you delete the files from here you
must ensure that there is no customer operation,
taking place.
after deleting the RTU and UPINST folders,
however when you delete the files from here you
must ensure that there is no customer operation,
taking place.
Startup
Startup
Errors
Errors
UP-??? Frequently Asked Questions
UP-??? Frequently Asked Questions
The following message appears when I
try and sign onto a slave machine.
try and sign onto a slave machine.
“Master Comms error 00a1”
This is an internal application error
therefore nothing to do with external PC
comms, The likely problem is that the
master machine is powered off or
disconnected or there is a network fault.
therefore nothing to do with external PC
comms, The likely problem is that the
master machine is powered off or
disconnected or there is a network fault.
Startup
Startup
Errors
Errors
UP-??? Frequently Asked Questions
UP-??? Frequently Asked Questions
Answer = 2 Items on the network
with the sane Node ID within
Rincs.cfg
with the sane Node ID within
Rincs.cfg
I have the following error when the UP5700 / UP5300
starts up
starts up
ANET_INIT FAILED - 22
FATEL ERROR EXIT CODE -10
FATEL ERROR EXIT CODE -10
Backup & Restore
Backup & Restore
UP-??? Frequently Asked Questions
UP-??? Frequently Asked Questions
How do I copy one or more files from a
Pc to the UP5700 / UP5300 without
using the Network?
Pc to the UP5700 / UP5300 without
using the Network?
Set Dip-switch 3 to be off. Connect the Apld cable.
Reboot the 5700 when prompted with “command waiting”
Press escape and select exit, once into dos at the A:
prompt type Intersvr, go to Pc and select Pos Entry Mode
this will reboot the PC into Dos then type f: This should
then connect to the c: drive on the POS you can now
copy the file from your PC to the POS
Reboot the 5700 when prompted with “command waiting”
Press escape and select exit, once into dos at the A:
prompt type Intersvr, go to Pc and select Pos Entry Mode
this will reboot the PC into Dos then type f: This should
then connect to the c: drive on the POS you can now
copy the file from your PC to the POS
Click on the first or last page to see other DOS HOSPITALITY (serv.man7) service manuals if exist.