DOWNLOAD Sharp UP-600 / UP-700 (serv.man7) Service Manual ↓ Size: 1.57 MB | Pages: 40 in PDF or view online for FREE

4

There are 2 ports as standard on the UP600/700.

Ch1 is a standard 9 way D Type (This does not have 5v from out of the box, a switch
is provided to supply the 5v.

The maximum speed of this channel is 38400

Ch2 is an RJ45 connection.

Maximum baud rate for this channel is 115200 but there is no 5v supply.

Channel 2 (only Ch2) is also used for send and receive data from ECR to ECR., or
PC to ECR.

5

The Clerk/Cashier system on the UP600/700 is much more flexible than previous
machines .

You will notice a change to the System Pre-set line 910.

There is no selection required for the type of clerk system i.e. Clerk Code entry
or Clerk Pre-sets or Real keys as any combination of theses systems can now be
operational on the UP600/700.

There are 12 real Clerk keys as standard (this can be upgraded to 126)

Before you can use the Real key system you must set a key number in Program
position if the key number is left at zero then the Real Key does not work.

The Real key will always take priority over the code or pre-set entry. (e.g. if the
Real key is inserted you will be unable to sign on with another code or pre-set.)

The Overlap feature is for Clerks only (not Cashiers)

When setting up Overlap on this machine, as well as carrying out the usual jobs such
as creating overlap file  and changing job 910-A you will also have to set job code
909-D (Transaction in progress) even if you are not using the real key system.

Each Overlap file takes up approximately 10k of RAM

The GC RECEIPT feature works slightly different to the ERA770 and UP3300.

Opened Table list on display
(Automatically at clerk insert or by key press)

Simplified operation of Tables
(No need for NC key)

6

Bill Separate/Bill Transfer on screen
(As ERA770)

Infinite number of fully itemised customer Bill
(By use of Intermediate bill Auto Key arrangement)

Shared Printing (RS232)
(Bill/Slip or KP)

PLU Menus
(25 Menus 15 items per Menu)

Condiment Menus
15 Condiment Tables 15 items per Table)

Combo EAN/PLU
10 Combo’s 10 items per Combo

Shift Sort Receipt
(Sorted Groups can be shifted therefore Starter as Mains)

Floating Servers
(As 750/770/3300 not just Overlap)

Mixed Cashier/Clerk system
(A combination of Cashier/Clerk system can be in operation on the same machine)

16 Characters for Dept/PLU/EAN
(Choice of 12 or 16 Characters by file)

Clerk in use indicator
(On a network system the operator will be warned that a specific clerk is in overlap
on a specific machine)

7

The type of network used on the UP600/700 is a LAN.
(Local Area Network)

Transmission system

10Base-T

(10 Mega bits/sec on UTP structured cable)

Transmission Distance 

Segment length max 100M

Cable Type

UTP (Unshielded Twisted Pair)

Number of connectable machines 

15 for Real Time Communications
32 for general LAN specification

1.  Each machine must be fitted with an UP-E10IN Interface board.

2.  Memory Board UP-S02MB or UP-S04MB must be fitted to the master, and

depending on the system configuration may be required in the Slave terminals.

The programming of the Network is almost the same as on previous models.

The only difference is setting the Terminal number and master list.

Instead of referring to the Terminal number we will refer to them as the IP Address

The first 3 addresses should be set as the default setting.