DOWNLOAD Sharp UP-600 / UP-700 (serv.man29) Service Manual ↓ Size: 349.37 KB | Pages: 114 in PDF or view online for FREE

Is it possible to have a Z counter printed on a
Clerk Report ?

Yes, please change Job Code 907-D to = 0, 1 or
2.

When finalising through CR for an RA transaction,
the CR amounts are not updated, on the General
Report.

You will have to change a setting in PGM, go to
OPTIONS/FUNC SELECT1.and select CR in
RA/PO as UPDATE.

When the TAX rates are set to zero the taxable

amount is not shown on the reports

You will have to set up a Tax rate above zero,

then take your report.

You can then go back to Tax setting and set the

rate back to zero.

The Taxable rate will now be shown on the

report.

What type of scanner can I use on the UP600/700
and what is the correct cable and configuration to
get it to operate.

Almost all of the Metrologic scanners will work
with this machine.
The cable and configuration is the same as any of
the other sharp machines such as the 610 and
450s
We have included some set-up guides in the
training manual, but you have to check with your
supplier for clarification of model type.