DOWNLOAD Sharp UP-600 / UP-700 (serv.man29) Service Manual ↓ Size: 349.37 KB | Pages: 114 in PDF or view online for FREE

What programming is required to have a Back Up
Master on a network.

You would carry out the normal In- Line set up,
however you would set BACK UP Master to
EXIST in all the slaves and Master.
Then you would perform a RECOVER DECLARE
job on the Master before any operations are
performed.
You should program the slaves followed by the
Back-up Master and finally the Master terminal.

Is it possible to have a Master Back-up
Configuration on a 2 Till System.

Yes, The bit that is sometimes missed out is that
the Master machine must have a Recovery
declaration carried out before operation begins.

Is it possible to automatically convert the pre-set
prices already in the machine from domestic
currency to their Euro equivalent.

Yes, This feature is available. You can also
program a date when the calculation will
automatically occur. This is done under
OPTIONAL-EURO.

My machine will not allow me to change the Euro
Status to B on a network system.

You may have carry out a System General reset
report first, depending on what state the machine
is in.