Sharp UP-600 / UP-700 (serv.man29) FAQ ▷ View online
UP-600/700 Frequently Asked Questions
UP-600/700 Frequently Asked Questions
Report Queries
Report Queries
When taking a system PLU Report from the
Master it does not appear to contain the PLU
totals from the satellite machine.
Master it does not appear to contain the PLU
totals from the satellite machine.
Please refer to previous slide.
The problem at this site was Job T Log was not
set (923-C was set to 0.)
Changed 932-C to 1 and everything was OK.
The problem at this site was Job T Log was not
set (923-C was set to 0.)
Changed 932-C to 1 and everything was OK.
UP-600/700 Frequently Asked Questions
UP-600/700 Frequently Asked Questions
Report Queries
Report Queries
When taking a system PLU Report the machine
does not contain the PLU totals.
does not contain the PLU totals.
Please refer to previous slide.
This phenomenon was caused by incorrect file set
up.
File 30 was not present, this was caused by
converting a Slave machine to a Master.
This phenomenon was caused by incorrect file set
up.
File 30 was not present, this was caused by
converting a Slave machine to a Master.
TO create file 30 you will have to re-create the relevant price band
TO create file 30 you will have to re-create the relevant price band
PLU file
PLU file
UP-600/700 Frequently Asked Questions
UP-600/700 Frequently Asked Questions
Report Queries
Report Queries
When taking a system PLU Report the machine
does not contain the PLU totals.
does not contain the PLU totals.
After going through the previous slides. The
problem still existed.
problem still existed.
This phenomenon was caused by lack of memory.
Overlap files were deleted, 910-A set to 0.
Then IRC was re-created.and the problem was
resolved.
Overlap files were deleted, 910-A set to 0.
Then IRC was re-created.and the problem was
resolved.
UP-600/700 Frequently Asked Questions
UP-600/700 Frequently Asked Questions
Report Queries
Report Queries
When taking a system PLU Report the machine
does not contain the PLU totals.
does not contain the PLU totals.
Please refer to previous slide.
This was caused by setting line 909-B to 4.
“Skipping of data on PLU resetting report”.
This was caused by setting line 909-B to 4.
“Skipping of data on PLU resetting report”.
Click on the first or last page to see other UP-600 / UP-700 (serv.man29) service manuals if exist.