Sharp UP-600 / UP-700 (serv.man25) Service Manual ▷ View online
4) BLANK KEY SHEET LAYOUT (Only for UP-700)
3. DISPLAY
1) OPERATOR DISPLAY
•
Screen example 1 (REG mode)
Price level shift indicator
(P1-P3)
(P1-P3)
: Shows the PLU/EAN price level
currently selected.
PLU level shift indicator
(L1-L3)
(L1-L3)
: Shows the PLU level currently se-
lected.
Receipt shift indicator (r)
: Shows the receipt shift status.
T-Log near full indicator
( )
( )
: Appears ( ) when the used mem-
ory is 80%.
: Appears ( ) when the used mem-
ory is 90%.
: Appears ( ) when the used mem-
ory is 95%.
Stock alarm indicator ( ! )
: Appears when the stock of the PLU
which you entered is zero, negative
or reaches the minimum stock.
or reaches the minimum stock.
VAT shift status indicator
(V)
(V)
: Appears when the VAT status is
shifted.
Electronic mail indicator
(M)
(M)
: Appears when an electronic mail is
received. (Status 1 area)
Receipt ON/OFF status in-
dicator (R)
dicator (R)
: Appears when the receipt ON-OFF
function signs OFF.
Sentinel mark (X)
: Appears in the lower right corner of
the screen when the cash in drawer
exceeds a programmed sentinel
amount.
exceeds a programmed sentinel
amount.
The sentinel check is performed for
the total cash in drawer.
the total cash in drawer.
VMP file full indicator
(1,2, or 3)
(1,2, or 3)
: When a VMP file used memory is
90% or more, its file number is indi-
cated.
cated.
•
Screen example 2 (PGM mode)
Screen save mode
When you want to save the electric power or save the display’s life,
use the screen save function. This function can turn the LCD off when
any server does not operate the POS terminal for an extended period
of time. You can program the time for which your POS terminal
should keep the normal status (in which the backlight is "ON") before
it goes into the screen save mode.
To go back to the normal mode, press any key.
use the screen save function. This function can turn the LCD off when
any server does not operate the POS terminal for an extended period
of time. You can program the time for which your POS terminal
should keep the normal status (in which the backlight is "ON") before
it goes into the screen save mode.
To go back to the normal mode, press any key.
Device type
LCD display
Dot format
320(W) x 240(H) Full dot
Dot size
0.24 (W) x 0.21 (H) mm
Dot space
0.02 mm
Dot color
White
Back color
Dark blue
2) DISPLAY ADJUSTMENT (OPERATION DISPLAY)
You can adjust the contrast of the display by using the contrast
control, and also you can adjust the display angle. Pull up the tab, the
display will head up.
control, and also you can adjust the display angle. Pull up the tab, the
display will head up.
The backlight in the display is a consumable part.
When the LCD display may no longer be adjusted and becomes
darker, you should change the backlight.
Consult your authorized SHARP dealer for further details.
When the LCD display may no longer be adjusted and becomes
darker, you should change the backlight.
Consult your authorized SHARP dealer for further details.
3) CUSTOMER DISPLAY (Pop-up-type)
Scroll guidance:
Clerk code
Mode name
Status area 1:
Time
Status area 2:
Numeric entry
(In case of cashier only system or clerk + cashier
system, cashier code is displayed.)
system, cashier code is displayed.)
When a transaction information
occupies more than 5 lines, scroll
key(s) appears to indicate you can
scroll to the direction.
occupies more than 5 lines, scroll
key(s) appears to indicate you can
scroll to the direction.
Sales information
area:
Sales information
you have just entered
such as items and
prices will appear
between 2nd line and
6th line.
Total is always appear
at 7th line.
Programming item
information area
information area
Programming area:
Programmable items
are listed.
Programmable items
are listed.
Double-size character mode
indicator (W):
Appears when the double-size
character mode is
selected during text programming.
indicator (W):
Appears when the double-size
character mode is
selected during text programming.
Caps lock indicator
(A/a):
(A/a):
The upper-case letter “A”
appears when caps lock is on,
and the lower-case letter “a”
appears when caps lock is off
during text programming.
appears when caps lock is on,
and the lower-case letter “a”
appears when caps lock is off
during text programming.
Tab
Contrast control
Turning the control backwards
darkens the display and
turning it forwards lightens the
display.
Turning the control backwards
darkens the display and
turning it forwards lightens the
display.
4. KEYS AND SWITCHES
1) MODE SWITCH AND MODE KEYS
The mode switch has these settings:
:
This mode locks all register operations.
No change occurs to register data.
No change occurs to register data.
OP X/Z: This setting allows cashiers/clerks to take X or Z reports for
their sales information. (This setting may be used only
when your register has been programmed for "OP X/Z
mode available" in the PGM2 mode.)
when your register has been programmed for "OP X/Z
mode available" in the PGM2 mode.)
REG:
For entering sales
PGM1:
To program those items that need to be changed often:
e.g., unit prices of departments, PLUs or EANs, and per-
centages
e.g., unit prices of departments, PLUs or EANs, and per-
centages
PGM2:
To program all PGM1 items and those items that do not
require frequent changes: e.g., date, time, or a variety of
register functions
require frequent changes: e.g., date, time, or a variety of
register functions
MGR:
For manager’s and submanager’s entries
The manager can use this mode to make entries that are
not permitted to be made by cashiers -for example, after-
transaction voiding and override entry.
The manager can use this mode to make entries that are
not permitted to be made by cashiers -for example, after-
transaction voiding and override entry.
X1/Z1:
To take the X/Z report for various daily totals
X2/Z2:
To take the X/Z report for various periodic (weekly or
monthly) consolidation
monthly) consolidation
2) CLERK KEYS (Standard for the UP-700)
This POS terminal allows the operator to use clerk keys (real clerk
keys) for clerk identification.
12 real clerk keys are provided with your POS terminal, and a maxi-
mum 126 real clerk keys can be provided.
keys) for clerk identification.
12 real clerk keys are provided with your POS terminal, and a maxi-
mum 126 real clerk keys can be provided.
3) DRAWER LOCK KEY
This key locks and unlocks the drawer. To lock it, turn 90 degrees
counterclockwise. To unlock it, turn 90 degrees clockwise.
(In case your POS terminal has not the drawer supplied by SHARP,
this key is not supplied.)
counterclockwise. To unlock it, turn 90 degrees clockwise.
(In case your POS terminal has not the drawer supplied by SHARP,
this key is not supplied.)
4) PRINTER COVER LOCK KEY
This key locks and unlocks the printer cover. To lock it, turn 90
degrees counterclockwise. To unlock, turn 90 degrees clockwise.
degrees counterclockwise. To unlock, turn 90 degrees clockwise.
REG
OP
X / Z
MGR
X
1
/Z
1
X
2
/Z
2
PGM
1
PGM
2
SRV
SRV'
SRV
MA
SM
MA
SM
SRV
• Manager key (MA)
• Submanager key (SM)
• Service key (SRV)
OP
• Operator key (OP)
SK1
-1
5. PRINTER
1) PRINTER (PR-58HA)
Item
Description
No. of station
2: Receipt and Journal
Validation
No
Printing system
Line thermal
No. of dot
Receipt:
360 dots
Journal
360 dots
Dot pitch
Horizontal:
0.125 mm
Vertical:
0.125 mm
Font
10 dots (W) x 24 dots (H)
Printing capacity
Receipt:
Max. 30 characters
Journal:
Max. 30 characters
Character size
1.25 mm (W) x 3.0 mm (H):
At 10 x 24 dots
Print pitch
Column distance:
1.5 mm
Row distance:
3.75 mm
Paper feed speed
Approximate 65 mm/s
Reliability
Mechanism:
MCBF 5 milion lines
Paper end sensor
Yes (Receipt and Journal)
Cutter
Auto
Paper near end sensor
No
Printing area
0.125
(7.0)
(7.0)
(5.5)
360dots
(45)
57.5
±
0.5
5.0
(5.5)
UNIT: mm
106(848dots)
Item
Description
Printing format
12 x 24 font
2) AUTOCUTTER
Item
Description
Cutting method
•
Full cutting (excluding 4 points)
•
Partial cutting (excluding 3 points)
Cuttable thickness
Thermal paper: 60 - 80
µ
mm
Cuttable width
57.5 0.5 mm
Reliability
Life: 300,000 times
3) PAPER
Item
Description
Name
Heat-quality paper
Roll dimension
57.5 0.5 mm in width
Thickness
0.06 mm to 0.08 mm
6. DRAWER
(Used for only KA and KB version)
1) SPECIFICATION
(1) Drawer box and drawer
Model name
SK-423
Size
420 (W) x 427 (L) x 114 (H)
Color
GRAY 368
Material
Metal
Bell
—
Release lever
Standard equipment; Situated at the bottom
Drawer open sensor
Standard equipment
2) MONEY CASE
Separation from the drawer
Allowed
Separation of the coin compartments
from the money case
from the money case
Allowed
Bill separator
Standard (1 pcs)
Number of compartments
4B/8C
3) LOCK
Location of the lock
Front
Method of locking
and unlocking
and unlocking
Locking:
Insert the drawer lock key into
the lock and turn it 90 degrees
counterclockwise.
the lock and turn it 90 degrees
counterclockwise.
Unlocking:
Insert the drawer lock key into
the lock and turn it 90 degrees
clockwise.
the lock and turn it 90 degrees
clockwise.
Key No.
SK1-1
1.5 (12dots)
1.5 (12dots)
0.125
0.
125
3.
0 (2
4d
ots)
3.
75 (30
d
o
ts)
3.
75 (30
d
o
ts)
UNIT: mm
Coin compartments
4B/8C
Click on the first or last page to see other UP-600 / UP-700 (serv.man25) service manuals if exist.