Sharp PN-V600 (serv.man3) Handy Guide ▷ View online
Video Wall
Configuration and Calibration
Ver 2FF
Course Objectives:
1.
Upon completion of this course the student will have an understanding
on how to configure a repaired / new unit into an existing Video Wall.
2.
Using a PC, RS232 straight cable and Datacolor Spyder3Elite colorimeter,
the student will be able to calibrate the unit to an existing Video Wall
white balance standard.
Unit Configuration
After you have repaired
the unit and reinstalled
into the video wall, you
will need to:
Configure the monitor to
work with the customers
video wall
Calibrate for white
balance if applicable.
Unit Configuration
1.
Turn on power using
remote control. Remote
I/R receiver must be
plugged in to monitor 1
2.
Hold “MODE” button on
remote control for 5
seconds until you enter the
“REMOTE CONTROL MODE”
3.
Select “All MONITORS”
4.
Scroll down and select
“OK”
